Actualizaciones De Cyclone!!!! Solo Actualizaciones, Cualquier Otro Mensaje Es Eliminado Opciones

[SpLock]

** Cyclone fixed Installer v1.06 (DCT4) **

--------------------------------------------------------------------------------

!!! INSTALLER v1.06 !!!

(fixed DCT4 and some other critical bugs)

DOWNLOAD LINK
DOWNLOAD LINK

[Anunciante Autorizado]

[Fixcell]

Cyclone MAJOR Update - New FBUS Protocol (X3,X6) - DCT4RSA(1661,5030) - COM Emulator

Hello, New Cyclone Box Installer is READY.

What's new?

Installer v1.05
23.04.2010

- Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones - E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
- Added support for BB5 FBUS New Protocol APE Loaders
- Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
- Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
- Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
- Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
- Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
- Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"
- Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !
- Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not ready",etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:

GR0103D101260C206C02
GR0103D101260C213402
GR0103D10126095A1F05
GR0103D10126095A1F07
GR0103D10126095A1F87
GR0103D1012601022C00
GR0103D1012601022E05
GR09733814140C206C02
GR0973381414095A1F05
GR0973381414095A1F07
GR0973381414095A1F87
GR097338141401022C00
ISL2TI020000093E2F30
NI00IIIIRR030C20C607
NI00IIIIRR03095B1F00
NI00IIIIRR03095B1F01
NI00IIIIRR030102F200
NI00IIIIRR030102F201
NI00IIIIRR030102F202
NI00IIIIRR030102F203
NI00IIIIRR0301035420
NIMMIIIIRRFF0A021001
NIMMIIIIRRFF094B2F01
NIMMIIIIRRFF06150018
NIMMIIIIRRFF06150110
ST090404003C06150018
ST090404004C06150018

- Added TX2 warning when certificate is being not accepted (common problem while writing RPL)
- Updated Nokia USB Connectivity Drivers to 7.1.22.0
- Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)
- Folder "StoredFiles" is no longer marked to Delete upon Uninstallation to keep old backup files
- Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up
- Factory defaults after flash are now defaultly ticket (BB5,DCT4)
- Mode transition manager added in firmware v01.37
- Software accept Mode Transision to "Normal" when phone goes to "Power Off"
- Flash Variants are displayed now in descending order
- SL Array readen now upon RPL Backup is Keyb/FBUS Count masked
- Now, all 7 codes are being sent to phone (some phones don't accept +7 codes - tested on N71)
- Fixed NCK Calculation for some mobiles (Security Section Checksum Error)
- When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database
- Fixed smartcard not responding for reset in some configurations
- Fixed "Failed to Read SP Info" on older RAPv2 phones
- Path manager - bug "/" fixed
- Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)
- SX4 Bypass is removed now (no need anymore)
- Improved sending CMT Secondary Loader
- Fixed TX2 test crash when phone is completly erased (TOC erased)
- Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database
- Improved Security Analysis, added HWC/CCC/Variant Certs Check
- Box Firmware : 01.0C, Access Violation Fixed
- Runtime Error when "Disable Skins" enabled fixed
- Taksbar problems fixed
- Fixed 1208 UEM Read/IMEI Rebuild
- N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)
- New Nokia Firmware introduced, improved stability a lot
- DCT4Plus relock fixed
- Mode transition improved
- BB5 USB Flashing fixed
- Factory Set problems fixed
- Fixed problems when dealing with RAP3v2 Phones
- Skin manager upgraded to v6.63
- HW Platform is now being readen upon Box Initialization
- Added support for CTF'2010 Platform
- Flashbus writing speed increased about 10%
- Flashbus FUR messages reading speed increased about 40%
- BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..
- After flashing, added average writing speed display
- BootAgent removed, now Bootloader upgrade is managed by middle-loader
- Main Firmware rewritten from scratch, old bugs gone away.
- MPU Added
- Improved Oscillator startup time, box hangup fixed in some cases
- Realtime clock not used anymore, too much hardware problems when box not started
- Fixed booting dead BB5 mobiles
- If bb5 booting fails, SW displays possible reason reported by new firmware
- BB5 is being try to boot now without hardware VCC switch
- Added USB Dualport transactions (increases speed)
- Added old protocols support (tick "Use Old Protocols Loader")
- Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)
- BB5 flash_block_Data checksum fixed
- Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)
- Fixed boot when after activating DCT4 FTD phone comes to dead
- Fixed "Failed to decode MSID" when flashing some PPM DCT4 files
- UPP ID is now represented as hex upon Read Info
- Added detection whether Pri/Sec camera exists or is configurable
- Minor changes and bugfixes
- Black Skin introduced
- Fixed DCT4 Unlock not being executed after Flashing Procedure
- Versions snap
Installer v1.05
Main x86 Application v1.0.0.9392
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.10
Onboard Main Nokia Application v01.37
Onboard COM Emulation Code v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.22.0
BB5 USB/FPIF Single Line/FPIF DualLine v20100410
DCT4 FPIF Single Line/USB v20100410
DCT4 Unlock Patches DEPRECATED
Communication Stack SSLv3-keys-06092008
Skin Stack v6.63

Thanks to all contributors which supporting us! Thanks Moulnisky, ptt, Honey... Thanks arash & others...

[Fixcell]

** Cyclone fixed Installer v1.06 (DCT4) **

!!! INSTALLER v1.06 !!!

(fixed DCT4 and some other critical bugs

Download Link 1
Download Link 2

[jorcomax11]

creditos supercell

What is new?
- Blackberry Module added, support all latest 210 MEPs. Unlock is free, and uses server to calculate Unlock Codes.
- If Logger fails somehow, you might still use manual mode (if you know IMEI and MEP)
- All DCT4 RPLs are free now (Included ASICs: 2,5,6,7,11)
- Skin changed back to white one (too many users complained)
- Improved mode transition between Main/Boot (timeout increased)
- Fixed problem when upon adding "New Path" in "Paths" module Root directory was empty
- CBUS stack improved, if box is disconeected during work, it tries to connect it again instead of "CBUS ERROR"
- Minor changes and bugfixes

How it works?
1. Run Blackberry Module
2. Install drivers (skip this if done already)
3. Click "Read Phone"
4. Connect phone to computer
5. Unlock using calculated codes


Download aqui http://www.clangsm.com/forum/index.php?showtopic=104802

Mensaje modificado por jorcomax11 el May 7 2010, 10:22 PM

[fredovi]

bueno amigos aqui les dejo la descarga directa
solo copia y pegas este archivo en c/archivos de programa/cyclone
lo ejecuta y estamos listos

Mensaje modificado por fredovi el May 11 2010, 01:06 PM

Fichero(s) Adjunto(s)

 Cyclone1... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 4.95mb ) Número de descargas: 148
 BB_cyclo... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 70.57k ) Número de descargas: 1

 

[miguelcpm22]

v01.38 Nokia Firmware is uploaded to server

Changes:
- Fixed problem when Nokia correct BB5 NCKs was calculated only for levels +1,+2,+3, codes +4,+5,+6,+7 was wrongly calculated due to memory leak of calculation routines.
- Minor (or non enveloped yet ) changes and bugfixes

This is server-side update only, don't ask for "exe" file because new "exe" is not released at moment, just use Maintenance Tool and upgrade your box.

Every box have 3 tries of upgrading firmware, please be patient during upgrade process because it may take some time and if you will cancel it (When software will act as a "hangup") you will lose upgrade logs and will need ask us for adding another credits...



Best Regards,
Cyclone Team

[Eliminado_.::TECNICELL::._*]

Nokia v01.38 firmware se carga en el servidor

Cambios:
- Arreglado problema cuando NCKs Nokia BB5 correcta se calculó sólo en los niveles 1, 2, 3, 4 códigos, +5, +6, +7 se había calculado mal debido a la pérdida de memoria de las rutinas de cálculo.
- Menor (o no envuelto todavía) los cambios y correcciones de errores

Esta es la actualización del servidor únicamente, no piden "exe" ya que los nuevos "exe" no se libera en el momento, sólo tiene que utilizar Herramienta de mantenimiento y actualización de su cuadro.

Cada caja tiene 3 intentos de actualizar el firmware, por favor tenga paciencia durante el proceso de actualización, ya que puede tomar algún tiempo y si se quiere cancelarla (Cuando el software funcionará como un colgado ") usted perderá actualizar los registros y deberán pedir a nosotros para sumar otra créditos ...



Saludos cordiales,
Cyclone Team

[jnrrr]

Nokia v01.38 firmware se carga en el servidor

Cambios:
- Arreglado problema cuando NCKs Nokia BB5 correcta se calculó sólo en los niveles 1, 2, 3, 4 códigos, +5, +6, +7 se había calculado mal debido a la pérdida de memoria de las rutinas de cálculo.
- Menor (o no envuelto todavía) los cambios y correcciones de errores

Esta es la actualización del servidor únicamente, no piden "exe" ya que los nuevos "exe" no se libera en el momento, sólo tiene que utilizar Herramienta de mantenimiento y actualización de su cuadro.

Cada caja tiene 3 intentos de actualizar el firmware, por favor tenga paciencia durante el proceso de actualización, ya que puede tomar algún tiempo y si se quiere cancelarla (Cuando el software funcionará como un colgado ") usted perderá actualizar los registros y deberán pedir a nosotros para sumar otra créditos ...
Saludos cordiales,
Cyclone Team

Buenas, no entiendo bien lo que quiere decir de los niveles BB5 1,2,3,4. Quiere decir que ya es posible liberar los N70, 6680 y demas? Me lo podria indicar?
muchas gracias.

1 saludo.

[arnoldo0945]

Cyclone EVOLUTION ! Added FREE Clip Mode, Added FREE Infineon XGold Flashing & More..

--------------------------------------------------------------------------------

Hi to all
New Cyclone Box Installer, Firmware, Bootloader, is ready!
Most important changes:

=====================
Installer v1.07
30.06.2010
=====================
- New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)
- New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)
- Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.
- XGold: Support for dead phones flashing
- XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)
- XGold: Supports bauds 115200,230400,460800,921600
- XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly - wil select corect falshing method.
- XGold: Supports for changing phone PPM/CNT or/and MCU
- XGold: Support for latest 2010 PBL/EBL Loaders
- Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.
- Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).
- Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:
- Clip: Can unlock any DCT4+ phone within 2 secs (without PC)
- Clip: Can repair Contact Service (if caused by damaged simlock)
- Clip: Can Rebuild Simlock Area
- Clip: Can reset security code of most DCT4/BB5 phones
- Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones
- Clip: 100% Safe, fast and easy to use
- You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.
- New Secure Bootloader Agent v3.00 Released
- Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)
- New Secure Bootloader v2.12 have been released
- Bootloader: Added Clip Detection
- Bootloader: Fixed floating (blinking) "VBAT" port
- Bootloader: Added support for some new types of smartcard
- Bootloader: Improved startup time
- Bootloader: Improved security
- Bootloader: Minor changes and bugfixes
- Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")
- The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)
- Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .
- Blackberry IMEI Check fixed
- Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)
- Added Warning confirmation before Writing Alien SD Keys
- Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.
- Main Firmware v01.41 Released
- Box HW Rev A11E Added
- Minor changes and bugfixes

How to run "Clip Mode"?
1. Attach Clip Adapter to box "Diagnostic Port"
2. Connect Clip Adapter "USB" cable to box USB Input
3. Connect 9V battery to Clip Adapter
4. Connect phone to "Service Port"

How to use "Clip Mode"?
Once Clip Mode is run, you need use S1 Button to change it's mode.
Default clip mode is:
RED (slowly blinking) - read phone info via FBUS
other modes you can select pressing S1 button:
GREEN - Unlock/Repair simlock
BLUE - reset securitycode/sec.code attempts

Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.

Maybe some movie, how to use it?
Youtube: YouTube - Cyclone Box used as Clip with latest addon

Where to get clip hardware?
You can ask any of Cyclone Box distributor/reseller.
Hardware is relative cheap - 15 usd (end-user price).
We will update clip soon with other functions.
It's first official Cyclone Addon.
Keep note it is CYCLONE ADDON, and same Clip Adaptor - it's just adaptor and still Cyclone Box is needed to work!

Where from download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting
Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.

Best Regards,
Stay Tuned,
Cyclone Team

--------------------------------------------------------------------------------
Last edited by karwos; Today at 13:43.

[krlos_182x]

Cyclone EVOLUTION ! Added FREE Clip Mode, Added FREE Infineon XGold Flashing & More.. (2010-07-01)


New Cyclone Box Installer, Firmware, Bootloader, is ready!
Most important changes:
* ===================== Installer v1.07 30.06.2010 =====================
- New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)
- New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)
- Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.
- XGold: Support for dead phones flashing
- XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)
- XGold: Supports bauds 115200,230400,460800,921600
- XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly
- wil select corect falshing method.
- XGold: Supports for changing phone PPM/CNT or/and MCU
- XGold: Support for latest 2010 PBL/EBL Loaders
- Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.
- Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).
- Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:
- Clip: Can unlock any DCT4+ phone within 2 secs (without PC)
- Clip: Can repair Contact Service (if caused by damaged simlock)
- Clip: Can Rebuild Simlock Area
- Clip: Can reset security code of most DCT4/BB5 phones
- Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones
- Clip: 100% Safe, fast and easy to use
- You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.
- New Secure Bootloader Agent v3.00 Released
- Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)
- New Secure Bootloader v2.12 have been released
- Bootloader: Added Clip Detection
- Bootloader: Fixed floating (blinking) "VBAT" port
- Bootloader: Added support for some new types of smartcard
- Bootloader: Improved startup time
- Bootloader: Improved security
- Bootloader: Minor changes and bugfixes
- Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")
- The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)
- Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .
- Blackberry IMEI Check fixed
- Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)
- Added Warning confirmation before Writing Alien SD Keys
- Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.
- Main Firmware v01.41 Released
- Box HW Rev A11E Added
- Minor changes and bugfixes


How to run "Clip Mode"?
1. Attach Clip Adapter to box "Diagnostic Port"
2. Connect Clip Adapter "USB" cable to box USB Input
3. Connect 9V battery to Clip Adapter
4. Connect phone to "Service Port"
*
How to use "Clip Mode"?
Once Clip Mode is run, you need use S1 Button to change it's mode.
Default clip mode is:
RED (slowly blinking)
- read phone info via FBUS
other modes you can select pressing S1 button:
GREEN
- Unlock/Repair simlock
BLUE
- reset securitycode/sec.code attempts


Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.
*
Maybe some movie, how to use it?
Youtube: YouTube
- Cyclone Box used as Clip with latest addon
*
Where to get clip hardware?
You can ask any of Cyclone Box distributor/reseller.
Hardware is relative cheap
- 15 usd (end-user price).
We will update clip soon with other functions.
It's first official Cyclone Addon.
Keep note it is CYCLONE ADDON, and same Clip Adaptor
- it's just adaptor and still Cyclone Box is needed to work!



Where from download?
RapidShare: 1-CLICK Web hosting
- Easy Filehosting
*
Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.
*
Best Regards,
Stay Tuned,
Cyclone Team

[Eliminado_.::TECNICELL::._*]

Ciclón EVOLUTION! Añadido modo de secuencia gratuita, Infineon Alta GRATIS XGold intermitente y más .. (01/07/2010)


Nuevo ciclón Caja Installer, Firmware, gestor de arranque, está listo!
Cambios más importantes:
* Instalador v1.07 30.06.2010 ===================== =====================
- Nueva Cargadores FBUS v10.18.00 introducido (nuevo protocolo, por RAPIDO, RAPU, ST, etc)
- Nueva FBUS Lodaers v10.16.00 introducido (protocolo de edad, por RAPv3)
- Añadido soporte para teléfonos Infineon X-Gold parpadear. Los teléfonos: 1661 RH-111, HR-125, etc
- XGold: Apoyo a los teléfonos muertos intermitente
- XGold: Soporte para el flash cruz (1616 hemos probado intermitente con 1800 firmware y parece obras. De todos modos USTED es responsable de ningún daño. Realiza PM se está seguro de copia de seguridad antes de cruzar-flash. Usted también no puede flashear teléfonos con difrent plataforma (es decir, RH111 <> RH125). Demasiado diferentes CPU, LCD ..., etc ..)
- XGold: Apoya baudios 115200,230400,460800,921600
- XGold: No es necesario saber que el teléfono está basado en UPP o Infineon. Simplemente seleccione el modelo y el ciclón lo detectará automáticamente
- Aparecerá seleccionar el método falshing corecta.
- XGold: Soportes para cambiar de teléfono PPM / CNT y / o MCU
- XGold: Apoyo a más tardar 2010 ABP / EBL Cargadores
- Añadido "Flash único idioma" casilla de verificación para móviles DCT4/XGold. Utilice únicamente si la versión instalada en el teléfono MCU partidos PPM / CNT versión que va a ser flasheado.
- Ciclón Clip módulo de diagnóstico añadido. Esto se utiliza para realizar pruebas adicionales de hardware Cyclone (Clip).
- Clip Módulo de Alta en Main Firmware. Esto se utiliza sólo con "Cyclone Clip" hardware. Clip Características:
- Clip: ¿Se puede desbloquear cualquier teléfono + DCT4 dentro de 2 segundos (sin PC)
- Clip: Puede reparar Contactar con el servicio (si es causado por simlock dañada)
- Clip: ¿Se puede reconstruir la zona simlock
- Clip: ¿Se puede restablecer el código de seguridad de la mayoría de los teléfonos DCT4/BB5
- Clip: ¿Se puede restablecer el código de seguridad contra intentos mal de la mayoría de los teléfonos DCT4/BB5
- Clip: 100% Seguro, rápido y fácil de usar
- Es necesario tener Clip de hardware a utilizar Galería Funcionalidad. Clip es un hardware muy simple unidos con batery al Puerto de Diagnóstico (y caja podrían ser utilizados como pinza sin necesidad de PC). Vamos a actualizar clip posterior para otros funcionalidad.
- Nuevo Agente de arranque seguro v3.00 Fecha de lanzamiento
- Añadido modo de recuperación de arranque Muerto (en caso de hacer "de arranque de recuperación" (por si acaso) tarjeta inteligente debe ser removido para iniciar el modo de recuperación!)
- Nueva de arranque seguro v2.12 han sido liberados
- Gestor de Arranque: Detección Clip Añadido
- Gestor de Arranque: Se ha corregido flotante (parpadeando) "VBAT" puerto
- Gestor de Arranque: Añadido soporte para nuevos tipos de tarjeta inteligente
- Gestor de Arranque: Mejora el tiempo de inicio
- Gestor de Arranque: Mejora de la seguridad
- Gestor de Arranque: Cambios y correcciones de errores
- Se ha añadido nuevos mensajes a NCK Teléfono análisis Responder (añadido "Demasiado rápido entre intentos" y "No bloqueado en determinado locklevel")
- Las contraseñas NCK +4/5/6 / 7 BB5 son calculados correctamente (pérdida de memoria en el código de cálculo)
- Mensaje "Esto va a consumir XX créditos" eliminado teniendo DCT4 RPL, siempre y cuando estén libres.
- Blackberry IMEI Compruebe fija
- Añadido "Skip CMT ID Check" para algunos teléfonos BB5 (si usted está tratando de archivos flash extranjero o NMP cometido algún error durante la construcción FIASCO imágenes)
- Añadida la advertencia de confirmación antes de escribir Alien SD claves
- Error al desbloquear DCT4 RSA teléfonos fijos (Error 0x02). Han producido un error cuando se utiliza mal cable.
- Fecha de lanzamiento principal del firmware v01.41
- HW Caja A11E Rev Alta
- Cambios menores y correcciones de errores


Cómo ejecutar "Clip Mode"?
1. Adaptador de conectar el clip a la caja de "Puerto de diagnóstico"
2. Conecte Clip Adapter "USB" USB cable a la caja de entrada
3. Conecte la batería de 9V a la Galería multimedia adaptador
4. Conecta el teléfono a "Puerto de Servicio"
*
Cómo utilizar "Clip Mode"?
Una vez que se ejecuta el modo de clip, es necesario utilizar el botón S1 para cambiar su modo.
El modo por defecto clip es la siguiente:
RED (parpadeo lento)
- Leer la información del teléfono a través de FBUS
otros modos que puede seleccionar pulsando el botón S1:
VERDE
- Liberación / Reparación simlock
AZUL
- Código de Seguridad de reinicio o intentos sec.code


Una vez que se le asigna modo correcto, es necesario pulsar el botón S2. acción necesaria será tomada, y el éxito Greeen () o rojo (no) parpadeará el indicador luminoso después de todo rápido. Clip estará listo para el servicio telefónico siguiente / modo de selección de otros / etc.
*
Tal vez alguna película, cómo se utiliza?
Youtube: YouTube video clip cyclone
- Ciclón Caja utiliza como complemento con el último clip
*
Dónde obtener hardware clip?
Puede preguntar a cualquiera de ciclón Caja distribuidor / reseller.
El hardware es barato en relación
- 15 dólares (precio para el usuario).
Vamos a actualizar en breve clip con otras funciones.
Es el primer oficial del ciclón Addon.
Tenga en cuenta que es CYCLONE complemento, y lo mismo clip adaptador
- Es sólo el adaptador y todavía ciclón caja es necesaria para trabajar!



En caso de descarga?
RapidShare: 1-clik aqui
- Fácil Filehosting
*
Por favor, no olvide de actualizar cuadro utilizando el archivo EXE nuevo. Nuevo firmware v01.41 se necesita para ejecutar aplicaciones más recientes.
*
Saludos cordiales,
Stay Tuned,
Cyclone team

Mensaje modificado por .::TECNICELL::. el Jul 3 2010, 02:34 AM

[arnoldo0945]

Cyclone Box Firmware v01.42 Released

 Cyclone_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 51.98k ) Número de descargas: 4



Si cuando actualizan el FW de su Box, les da este error:

Handling device: [Cyclone Team], [Cyclone Box]
Firmware: Cyclone Nokia Application v01.42, (Jul 5 2010 20:38:02, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, © KarwosSoft 2010 wk23
Boot Agent: Cyclone Secure BootAgent Server v3.00 © KarwosSoft 2010 wk25
Cyclone Server Send Command Error -> Code: 500, Not allowed to Upgrade Bootloader

Failed to Upgrade Bootloader -> Server Transaction Failed
Secure Bootloader Update Skipped, Not allowed or not neededDisconnected from Cyclone Server
Box Maintenance finished successfull

No se precupen este error es porque ya tenian actualizado el Bootloader de su Box.

Saludos

Mensaje modificado por arnoldo0945 el Jul 5 2010, 06:27 PM

[miguelcpm22]

Hi, New firmware v01.43 is uploaded to server

- Fixed "Smartcard is not responding for reset" in some configurations. Thanks TouTouGSM for reporting and helping in removing this problem.

 Dibujo.J... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 65.7k ) Número de descargas: 0


Please upgrade your box only if you are encountering Smartcard problems, else no upgrade is needed.

Don't need to upgrade exe if you have installed latest installer (released on 01.07.2010), else install this installer to have backward Nokia Loaders compatibilty. To upgrade just go to "Box Maintenance" and use Maintenace to write latest microcode.

As always,every box having 3 update credits. Please WAIT PATIENTLY during upgrade as it will end (else your box will not be upgraded, and credits will be charged, you will need to ask us agian, etc, etc - so just click BOX MAINTENANCE and patiently WAIT!).

During upgrade you may see message like "Cant upgrade bootloader", "Not allowed to upgrade bootloader", "Bootloader upgrade skipped". THIS IS VERY NORMAL becuase BOOTLOADER SHOULD BE UPDATED ONLY ONCE to minimise risk of destroying your box. As you know bootloader is first code executed upon box bootup, so when its corrupt/destroyd box is bricked. So if your bootloader is already up to date you will receive such message, but that means everything is just fine.

Another things which need attention is usage latest firmware and latest NK loaders.
Keep note that firmwares >=v01.42 need have installed Nokia loaders 10.18.00 (latest installer update). Else you will encounter booting and flashing problems - firmware >=01.42 is not compatible with 0.9.50 loaders !!! So if you don't installed latest installer BUT upgraded Firmware to >=v01.42 YOU WILL ENCOUNTER NOKIA BB5 FLASHING PROBLEMS!

Just sticky with this rules and enjoy Cyclone

Best Regards,
Cyclone Team

[Fixcell]

Hi, that's is right time
New Cyclone Installer,Firmware,Loaders are avaiable.

What's new?
=====================
Installer v1.08
06.07.2010
=====================
- Added new Nokia FBUS Loaders for Old and New protocols (v10.20.0)
- Fixed problems with flashing RAPIDO based phones with hash 479.... (N86,X6). Was Nokia fault (10.18.0 loader pack was broken, probably problem with RSA signature so loader wasn't spawned at all...)
- Fixed problem with FUR initialization when dealing with v10 (2010) Nokia Loaders (Affected was new protocol phones)
- Forced users to install v1.08 changing few firmware routines - some users upgraded their boxes updating it for "v10" loaders, but they didn't installed new installer - their BB5 flashing was broken then. Forcing users to install v1.08 and upgrade box is just to ensure every user will have 100% working environment (latest loaders, latest firmware, latest exe).
- New Box Firmware v1.45 Released
- Handling some smartcards in main firmware fixed
- Minor changes and bugfixes

Where to download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

Don't forget to upgrade your box firmware to v01.45 !

Best Regards,
Stay Tuned,
Cyclone Team

[hackerscq]

Mas rapido por mediafire

http://www.mediafire.com/?zjymbqym5dj

[arnoldo0945]

Cyclone Box Installer v1.09 Released, SL3 Unlocking Added, New FBUS Loaders, and more

--------------------------------------------------------------------------------

Hi!
New update for Cyclone Box is Ready.

What's new?

CÓDIGO

=====================
Installer v1.09
02.08.2010
=====================
- New BB5 Loaders v10.22.00 Introduced
- SL3 Unlocking added, uses server and credits, supported models:

- 2700 Classic (RM-561)
- 2730 Classic (RM-57
- 2730c-1b (RM-579)
- 2690c (RM-635)
- 3600 Slide (RM-352) v56.26 – v57.23
- 3720 Classic (RM-51
- 5130 XpressMusic (RM-495)
- 5310 XpressMusic (RM-303) v58.58 – v59.42
- 5730s (RM-465)
- 6300 (RM-217) v57.20
- 6303 Classic (RM-443)
- 6500 Slide (RM-240) v59.60
- 6500 Classic (RM-265) v59.45
- N97 (RM-505/506/507)
- N97 mini (RM-555)

- When using New Protocol flashing, software reminds about correct TX2 cable and yellow adapter
- Added Manual Mode to retrieve SL3 NCK if you dont have phone in hand (just enter IMEI when asked)
- Added "Erase NCK Codes" - this should be used when phones needs to be factory-relocked (best to use with SL3 if you want to clear entered NCK codes). Work with SL2 too. Simlock area is untouched when Relocking to factory state, and warranty will still be ok. Seems first software on market with such funcionality.
- Fixed BlackBerry calculation problems, old version never closed TCP connection after success or non-success calculation
- Firmware v1.46 Released, Added SL3 Routines
- Minor changes and bugfixes Example SL3 unlocked by new update

CÓDIGO

BB5 Unlock Started...
MCU Version    V 07.95
MCU Date    03-02-10
Product        RM-495
Manufacturer    (c) Nokia            
IMEI        351538045311523
Mastercode    4612735731
Simlock Server    SIMLOCK SERVER
Simlock Key    2600300000000000
Simlock Profile    8000000000000000
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: CLOSED    Type: MCC-MNC    Data: 26003F
Connecting to Cyclone Server...
Cyclone Server (1.0.0.632), Cyclone Box Team 2008, 2009, 2010 - Ready.
Checking job status...
Code Ready, Code: #pw+966057384237461+7#
Sending code via FBUS...
NCK[7] - ACCEPTED
Code Accepted! Unlocking Finished! Where from download?

http://rapidshare.com/files/410684868/Cycl...taller.exe.html

A firmware upgrade to v1.46 is needed to use this update!

Stay tuned,
Best Regards,
Cyclone Team

Price for each phone is 50 credits

You can use old 9ddb credits too.

Wait time now depends on user demand... if queue will be full it may be few days, if queue empty - few minutes.

Mensaje modificado por arnoldo0945 el Aug 2 2010, 08:14 PM

[lalo unlock]

Unlock SL3 Possible! (2010-08-03)

Hi!
New update for Cyclone Box is Ready.
What's new?
Code:
=====================
Installer v1.09
02.08.2010
=====================
- New BB5 Loaders v10.22.00 Introduced
- SL3 Unlocking added, uses server and credits, supported models:

- 2700 Classic (RM-561)
- 2730 Classic (RM-57
- 2730c-1b (RM-579)
- 2690c (RM-635)
- 3600 Slide (RM-352) v56.26 ?v57.23
- 3720 Classic (RM-51
- 5130 XpressMusic (RM-495)
- 5310 XpressMusic (RM-303) v58.58 ?v59.42
- 5730s (RM-465)
- 6300 (RM-217) v57.20
- 6303 Classic (RM-443)
- 6500 Slide (RM-240) v59.60
- 6500 Classic (RM-265) v59.45
- N97 (RM-505/506/507)
- N97 mini (RM-555)

- When using New Protocol flashing, software reminds about correct TX2 cable and yellow adapter
- Added Manual Mode to retrieve SL3 NCK if you dont have phone in hand (just enter IMEI when asked)
- Added "Erase NCK Codes" - this should be used when phones needs to be factory-relocked (best to use with SL3 if you want to clear entered NCK codes). Work with SL2 too. Simlock area is untouched when Relocking to factory state, and warranty will still be ok. Seems first software on market with such funcionality.
- Fixed BlackBerry calculation problems, old version never closed TCP connection after success or non-success calculation
- Firmware v1.46 Released, Added SL3 Routines
- Minor changes and bugfixes

Example SL3 unlocked by new update

Code:

BB5 Unlock Started...
MCU Version V 07.95
MCU Date 03-02-10
Product RM-495
Manufacturer © Nokia
IMEI 351538045311523
Mastercode 4612735731
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Connecting to Cyclone Server...
Cyclone Server (1.0.0.632), Cyclone Box Team 2008, 2009, 2010 - Ready.
Checking job status...
Code Ready, Code: #pw+966057384237461+7#
Sending code via FBUS...
NCK[7] - ACCEPTED
Code Accepted! Unlocking Finished!

Where from download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting

A firmware upgrade to v1.46 is needed to use this update!

donwloads link 1
link 2

http://rapidshare.com/files/410684868/Cycl...taller.exe.html

[supercell]

CycloneBox Blackberry module updatedALL LATEST PHONES WITH NEW SECURITY ARE SUPPORTED NOW WITH CYCLONE BOX (BY IMEI AND CABLE)

HERE IS THE LIST OF SUPPORTED MEPS


MEP-16826-001
MEP-17232-001
MEP-17490-001
MEP-17568-002
MEP-18601-001
MEP-18637-001
MEP-10073-001
MEP-10129-001
MEP-10129-002
MEP-10129-003
MEP-10129-004
MEP-10129-005
MEP-11016-001
MEP-11139-001
MEP-11139-002
MEP-11139-003
MEP-11139-004
MEP-11139-005
MEP-04103-001
MEP-04103-002
MEP-04103-004
MEP-04104-003
MEP-04104-004
MEP-04104-005
MEP-04104-006
MEP-04104-007
MEP-04546-001
MEP-04598-003
MEP-04598-004
MEP-04598-005
MEP-04626-001
MEP-04626-002
MEP-04938-001
MEP-04938-002
MEP-05277-001
MEP-05277-002
MEP-05277-004
MEP-05277-005
MEP-06041-001
MEP-06041-003
MEP-06041-004
MEP-06041-005
MEP-06041-006
MEP-06041-007
MEP-06041-008
MEP-06041-009
MEP-06041-010
MEP-06068-001
MEP-06068-002
MEP-06259-002
MEP-06259-003
MEP-06423-001
MEP-06424-001
MEP-06424-002
MEP-06529-001
MEP-06529-002
MEP-06530-001
MEP-06530-002
MEP-06810-002
MEP-06811-003
MEP-06812-001
MEP-06812-003
MEP-06812-004
MEP-06813-001
MEP-06813-002
MEP-06814-001
MEP-06814-002
MEP-06814-004
MEP-06814-005
MEP-06849-001
MEP-06849-002
MEP-06893-001
MEP-06899-001
MEP-06899-002
MEP-07321-002
MEP-07484-001
MEP-07484-002
MEP-07484-003
MEP-07484-004
MEP-07484-005
MEP-07484-006
MEP-07484-007
MEP-07705-002
MEP-07705-003
MEP-07722-001
MEP-07722-002
MEP-07722-003
MEP-07723-001
MEP-07723-003
MEP-07723-004
MEP-07723-005
MEP-07723-006
MEP-07723-007
MEP-07754-001
MEP-08209-001
MEP-08209-002
MEP-08209-003
MEP-08318-001
MEP-08395-001
MEP-08448-001
MEP-08448-002
MEP-08589-001
MEP-08881-001
MEP-08882-001
MEP-08918-001
MEP-09004-001
MEP-09070-001
MEP-09149-001
MEP-09292-001
MEP-09292-002
MEP-09292-003
MEP-09292-004
MEP-09292-005
MEP-09293-001
MEP-09625-001
MEP-09667-001
MEP-09690-001
MEP-09747-001
MEP-09783-002
MEP-09783-003
MEP-09821-001
MEP-09821-002
MEP-09821-003
MEP-09917-001
MEP-09938-001
MEP-11139-006
MEP-11246-001
MEP-11246-002
MEP-11414-001
MEP-11414-002
MEP-11534-002
MEP-11534-004
MEP-11534-005
MEP-11534-006
MEP-11534-007
MEP-11534-008
MEP-12186-001
MEP-12209-003
MEP-12209-004
MEP-12209-006
MEP-12209-007
MEP-12209-008
MEP-12488-001
MEP-12565-001
MEP-12579-001
MEP-12579-002
MEP-12599-003
MEP-12622-002
MEP-12907-002
MEP-12978-001
MEP-12980-001
MEP-12980-002
MEP-13188-001
MEP-13188-002
MEP-13188-006
MEP-13188-007
MEP-13188-008
MEP-13188-010
MEP-13710-001
MEP-13928-001
MEP-13928-002
MEP-13988-001
MEP-13990-001
MEP-14052-001
MEP-14052-002
MEP-14074-001
MEP-14074-002
MEP-14074-003
MEP-14150-001
MEP-14260-001
MEP-14260-002
MEP-14896-001
MEP-14896-002
MEP-14896-003
MEP-14896-004
MEP-14896-005
MEP-15159-001
MEP-15159-002
MEP-15326-001
MEP-15326-002
MEP-15343-001
MEP-16272-002
MEP-16272-003
MEP-16272-005
MEP-16352-001
MEP-16419-001
MEP-16472-001
MEP-19322-003
MEP-19877-001
MEP-20099-002
MEP-20099-004
MEP-20099-009
MEP-20166-001
MEP-20454-001
MEP-20669-001
MEP-21545-001
MEP-21878-001
MEP-22793-001
MEP-23361-001
MEP-24124-001
MEP-24409-002
MEP-24660-001
MEP-24667-001
MEP-24667-002
MEP-24723-001
MEP-24723-002
MEP-26594-001
MEP-26900-003
MEP-27488-001
MEP-27501-003
MEP-28240-002
MEP-28364-001
MEP-28555-001
MEP-29080-002
MEP-29318-001
MEP-30218-001
MEP-30218-002
MEP-30638-001
MEP-30669-001
MEP-31845-001
MEP-33006-002

NOTE : This is sever side update , you dont have to download or do anything



br
CycloneBox Team

[SpLock]

15/09/2010 CycloneBox SL3 Max 48 Hours Ready!!

Hi,
our servers and system is upgraded now. Queue is opened, however with some limited amount of slots.
After successfull phone upload maximum turnaround is 48 hours, usually may be after 5 minutes or so like this.
When all slots are busy, you will get message about this. Just keep tryin', because after one finished phone in queue (5-30min), user can upload a new one.

Stay tuned, ORANGE power is here waiting for explosion... and we don't need use big font, he he, we even don't need use any font, we just need release updates

PS. Please don't try contact me on PM or Sonork, i didn't use it anymore (yet).
Only way to contact me for now is ICQ, im too busy with new things to visit forum and reply 50 PMs a day. Thanks for understanding.

Best Regards,
Cyclone Team

No quice ponerlo en español para no alterar nada escrito por el sopòrte de la cyclone...

[SpLock]

15/09/2010 Tonight CycloneBOX SL3 RAPU (E52,E55,6700) RAP4 (X3) Server Update

Hi,
just a server update for new loaders
Supported
- Unlock by code calculation
- Superdongle repair/rebuild
- Standlone SX4 authorization
- DEVLOCk extract
- ..

Small "Taste "

CÓDIGO

WARNING: "1BB0020A296303443292389F545846C201100A5C.C000381B  " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
R&D: Skip Preloader Crypt
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
New Loader Detected
Loader: RAPUYama Loader v1.01 (c) KarwosSoft 2010 Poland
Loader: Running PA_HACK...
PA_HACK: OK, reading Die ID...
PA_HACK: Done
1BB0020A296303443292389F545846C201100A5C.C000381B Saved OK!

Thanks