Actualizaciones De Cyclone!!!! Solo Actualizaciones, Cualquier Otro Mensaje Es Eliminado Opciones

[gameshark]

aqui directo es un beta no esta en la pagina oficial recomendaria esperar ya que esas betas derrepente dan sorpresas

Mensaje modificado por gameshark el Apr 16 2010, 01:01 PM

Fichero(s) Adjunto(s)

 CycloneB... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 12.2mb ) Número de descargas: 11

 

[Anunciante Autorizado]

[downloadman]

Actualizar la box al firmware v01.35 para testear esta beta (Muy Importante)


Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.35, (Apr 16 2010 18:05:39, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, © KarwosSoft 2010 wk13
Box Serial Number: C000xxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk27
Initializing security card...
Card Serial Number: Dxxxxxxx
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,99v PASSED
MCU Voltage 3,31v PASSED
Core Voltage 1,76v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,97v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work

Mensaje modificado por downloadman el Apr 16 2010, 03:22 PM

[Fixcell]

Hello, you can download latest beta from here:

CycloneBeta_DCT4RSA_BB5NewProt


all DCT4+ phones are supported including 1661 , 1662 , 1208, 5030 etc


(please use it only for test DCT4 RSA purposes, full stable installer will be released tonight or tomorrow with some other great and unique features.).

Don't forget to upgrade box firmware!

Best Regards
Cyclone Team

Mensaje modificado por Fixcell el Apr 16 2010, 06:33 PM

Fichero(s) Adjunto(s)

 CycloneB... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 12.2mb ) Número de descargas: 67

 

[karlitos210]

Cyclone Box Firmware v01.36 Released

--------------------------------------------------------------------------------

- Fixed smartcard issues in some enivronments (Smartcard is not responding for reset)
- Fixed issues when some phones couldn't calculate NCK Codes with new method (Security Section Checksum Error)
- Minor changes and bugfixes

!! CYCLONE - STOP ME IF YOU CAN !!

[SpLock]

Cyclone MAJOR Update - New FBUS Protocol (X3,X6) - DCT4RSA(1661,5030) - COM Emulator

--------------------------------------------------------------------------------

Hello, New Cyclone Box Installer is READY.

What's new?

=====================
Installer v1.05
23.04.2010
=====================
- Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones - E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
- Added support for BB5 FBUS New Protocol APE Loaders
- Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
- Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
- Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
- Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
- Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
- Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"
- Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !
- Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not ready",etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:

GR0103D101260C206C02
GR0103D101260C213402
GR0103D10126095A1F05
GR0103D10126095A1F07
GR0103D10126095A1F87
GR0103D1012601022C00
GR0103D1012601022E05
GR09733814140C206C02
GR0973381414095A1F05
GR0973381414095A1F07
GR0973381414095A1F87
GR097338141401022C00
ISL2TI020000093E2F30
NI00IIIIRR030C20C607
NI00IIIIRR03095B1F00
NI00IIIIRR03095B1F01
NI00IIIIRR030102F200
NI00IIIIRR030102F201
NI00IIIIRR030102F202
NI00IIIIRR030102F203
NI00IIIIRR0301035420
NIMMIIIIRRFF0A021001
NIMMIIIIRRFF094B2F01
NIMMIIIIRRFF06150018
NIMMIIIIRRFF06150110
ST090404003C06150018
ST090404004C06150018

- Added TX2 warning when certificate is being not accepted (common problem while writing RPL)
- Updated Nokia USB Connectivity Drivers to 7.1.22.0
- Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)
- Folder "StoredFiles" is no longer marked to Delete upon Uninstallation to keep old backup files
- Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up
- Factory defaults after flash are now defaultly ticket (BB5,DCT4)
- Mode transition manager added in firmware v01.37
- Software accept Mode Transision to "Normal" when phone goes to "Power Off"
- Flash Variants are displayed now in descending order
- SL Array readen now upon RPL Backup is Keyb/FBUS Count masked
- Now, all 7 codes are being sent to phone (some phones don't accept +7 codes - tested on N71)
- Fixed NCK Calculation for some mobiles (Security Section Checksum Error)
- When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database
- Fixed smartcard not responding for reset in some configurations
- Fixed "Failed to Read SP Info" on older RAPv2 phones
- Path manager - bug "/" fixed
- Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)
- SX4 Bypass is removed now (no need anymore)
- Improved sending CMT Secondary Loader
- Fixed TX2 test crash when phone is completly erased (TOC erased)
- Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database
- Improved Security Analysis, added HWC/CCC/Variant Certs Check
- Box Firmware : 01.0C, Access Violation Fixed
- Runtime Error when "Disable Skins" enabled fixed
- Taksbar problems fixed
- Fixed 1208 UEM Read/IMEI Rebuild
- N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)
- New Nokia Firmware introduced, improved stability a lot
- DCT4Plus relock fixed
- Mode transition improved
- BB5 USB Flashing fixed
- Factory Set problems fixed
- Fixed problems when dealing with RAP3v2 Phones
- Skin manager upgraded to v6.63
- HW Platform is now being readen upon Box Initialization
- Added support for CTF'2010 Platform
- Flashbus writing speed increased about 10%
- Flashbus FUR messages reading speed increased about 40%
- BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..
- After flashing, added average writing speed display
- BootAgent removed, now Bootloader upgrade is managed by middle-loader
- Main Firmware rewritten from scratch, old bugs gone away.
- MPU Added
- Improved Oscillator startup time, box hangup fixed in some cases
- Realtime clock not used anymore, too much hardware problems when box not started
- Fixed booting dead BB5 mobiles
- If bb5 booting fails, SW displays possible reason reported by new firmware
- BB5 is being try to boot now without hardware VCC switch
- Added USB Dualport transactions (increases speed)
- Added old protocols support (tick "Use Old Protocols Loader")
- Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)
- BB5 flash_block_Data checksum fixed
- Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)
- Fixed boot when after activating DCT4 FTD phone comes to dead
- Fixed "Failed to decode MSID" when flashing some PPM DCT4 files
- UPP ID is now represented as hex upon Read Info
- Added detection whether Pri/Sec camera exists or is configurable
- Minor changes and bugfixes
- Black Skin introduced
- Fixed DCT4 Unlock not being executed after Flashing Procedure
- Versions snap
Installer v1.05
Main x86 Application v1.0.0.9392
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.10
Onboard Main Nokia Application v01.37
Onboard COM Emulation Code v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.22.0
BB5 USB/FPIF Single Line/FPIF DualLine v20100410
DCT4 FPIF Single Line/USB v20100410
DCT4 Unlock Patches DEPRECATED
Communication Stack SSLv3-keys-06092008
Skin Stack v6.63

Thanks to all contributors which supporting us! Thanks Moulnisky, ptt, Honey... Thanks arash & others...

Where to download?

Main Link: DESCARGAR

Traducciòn:

Ciclón actualización PRINCIPALES - Protocolo FBUS Nueva (X3, X6) - DCT4RSA (1661,5030) - Emulador de COM

-------------------------------------------------- ------------------------------

Hola, instalador de Nueva Caja Ciclón está listo.

¿Qué hay de nuevo?

=====================
Instalador v1.05
23.04.2010
=====================
- Añadido soporte para los nuevos Nokia BB5 FBUS Cargadores CMT (parpadeando nuevos teléfonos - Chip ST E52, X3, X6, 5530, etc, etc), con el apoyo RAPU, RAPIDO, RAPv4 teléfonos, etc Usted puede flashear el teléfono con nuevo Protocolo, sino también la gestión de Lectura / Escritura de certificados, etc
- Añadido soporte para BB5 FBUS Cargadores Nuevo Protocolo APE
- Añadido soporte para Desbloquear / Rebloqueo / Autolock DCT4 RSA basado teléfonos (1661, 5030, 1202, y en general todos los teléfonos ASIC 11), sin el parche. La solución es independiente y para desbloquear un teléfono no toma más de 2 segundos.
- Añadida la CS de reparación debido a las malas simlock en ASIC11 teléfonos (no hay parche)
- Las últimas Cargadores Nokia 2010 Introducido (incluyendo algoritmos actualizado RAPv3 prot vieja 9,50)
- Añadido SD reparación, RPL Calc, etc para los teléfonos RAP3v2 (hash E9EFF4BFAA5393217CA6B17755FC3E14)
- Añadida la copia de seguridad para teléfonos SIMLOCK SL3 (se puede restaurar, incluso después de fullerase)
- Añadido soporte para lectura NCK, SD Extracción y análisis Securtity más exacta para teléfonos v30.xx (N96, 5800, etc - así llamado por "x" equipo "SL3" pero en realidad es simple SL2), las versiones anteriores se dieron sobre msg "Descifrado falla"
- Se ha añadido COM emulador - ahora el ciclón puede funcionar como Caja UNI BOX con UFS Pinout!
- Se ha añadido un clic con el botón analizar y reparación de cámara dinámica de configuración (pantalla en blanco ", la cámara no está listo", etc) los teléfonos basados en (DCT4plus, 5310, 7210, 5220, 6700, otros) el apoyo controladores de la cámara:

GR0103D101260C206C02
GR0103D101260C213402
GR0103D10126095A1F05
GR0103D10126095A1F07
GR0103D10126095A1F87
GR0103D1012601022C00
GR0103D1012601022E05
GR09733814140C206C02
GR0973381414095A1F05
GR0973381414095A1F07
GR0973381414095A1F87
GR097338141401022C00
ISL2TI020000093E2F30
NI00IIIIRR030C20C607
NI00IIIIRR03095B1F00
NI00IIIIRR03095B1F01
NI00IIIIRR030102F200
NI00IIIIRR030102F201
NI00IIIIRR030102F202
NI00IIIIRR030102F203
NI00IIIIRR0301035420
NIMMIIIIRRFF0A021001
NIMMIIIIRRFF094B2F01
NIMMIIIIRRFF06150018
NIMMIIIIRRFF06150110
ST090404003C06150018
ST090404004C06150018

- Añadida la advertencia TX2 cuando el certificado está siendo no aceptadas (problema común al escribir RPL)
- Actualización de los controladores USB Nokia Conectividad a 7.1.22.0
- Tras la instalación, el permiso StoredFiles se establece ahora en su totalidad para evitar problemas de permisos (y el software sigue siendo seguro para los troyanos / etc)
- La carpeta "StoredFiles" ya no está marcada para eliminar a la desinstalación de mantener los viejos archivos de copia de seguridad
- Refundido BB5 RPL rutina de copia de seguridad, ahora están siendo certificados de copia de seguridad en primer lugar, por lo que incluso si el teléfono está muerto, todavía certs será una copia de seguridad
- Por defecto de fábrica después de flash son defaultly billete (BB5, DCT4)
- Gestor de transición de modo añadido en el firmware v01.37
- Software aceptar Transision modo "Normal" cuando el teléfono va a "Power Off"
- Variantes Flash ahora se muestran en orden descendente
- SL Array readen ahora sobre la copia de seguridad RPL KEYB / FBUS Conde enmascarados
- Ahora, todos los 7 códigos están siendo enviados al teléfono (algunos teléfonos no aceptan los códigos 7 - probado en N71)
- Cálculo NCK fijas para algunos móviles (Sección de Seguridad de comprobación de error)
- Cuando el software detecta HWC / CCC / Variante desajuste certs, intenta escribir un local de la base de datos
- Corregido tarjeta inteligente no responde a restablecer en algunas configuraciones
- Corregido "No se pudo leer SP Info" en los más antiguos teléfonos RAPv2
- Ruta gerente - error "/" fijo
- Corregidos los problemas con el manejo de StoredFiles cuando el software no tienen los permisos suficientes (se produce en WinVista / Win7)
- SX4 bypass se retira ahora (no hace falta más)
- Mejora el envío de CMT Secundaria cargador
- Solucionado el fallo prueba TX2 cuando el teléfono está completamente borrado (TOC borra)
- Añadido subir PM automática con el campo después de 1309 SX4 autorización (con un solo clic ST_SECURITY_FIX!), Apoyado 100 + BB5 en base de datos local
- Mejora de Análisis de Seguridad, agregó HWC / CCC / certs Variante Hora
- Caja del firmware: Violación 01.0C, acceso fijo
- Tiempo de ejecución de error a "Desactivar Skins" activado fijo
- Problemas Taksbar fija
- Volver a Leer 1208 fija UEM / IMEI
- Arranque N73 mejorar (cuando la copia de seguridad crt, la escritura incorrecta rpl cargadores se suponía antes)
- Nuevo Firmware Nokia presentó, la estabilidad ha mejorado mucho
- DCT4Plus rebloqueo fija
- Modo de mejorar la transición
- BB5 USB parpadeante fija
- Problemas de fábrica conjunto fijo
- Corregidos los problemas cuando se trata de teléfonos RAP3v2
- Gestor de piel actualizado a v6.63
- Plataforma HW ahora se está readen a Caja de inicialización
- Añadido soporte para la plataforma CTF'2010
- Velocidad de escritura Flashbus aumentó un 10%
- Mensajes de Flashbus FUR velocidad de lectura aumentó un 40%
- BB5 Arranque procedimiento reescrito, ahora no hay problemas en los teléfonos como el 5800, N97, 5200, etc.
- Después de parpadear, agregó escribir una velocidad media de pantalla
- BootAgent eliminado, actualización ahora gestor de arranque es administrado por medio del cargador
- Principales firmware reescrito desde cero, errores de edad desaparecido.
- MPU Alta
- Mejora de oscilador de inicio del tiempo, colgar caja fija, en algunos casos
- En tiempo real del reloj no se utiliza más, problemas de hardware demasiado cuando no se inició cuadro
- Corregido el arranque móviles BB5 muertos
- Si falla el arranque bb5, muestra SW posible razón reportada por el nuevo firmware
- BB5 se intenta arrancar ahora sin hardware del switch VCC
- Se ha añadido USB transacciones DualPort (aumenta la velocidad)
- Añadido soporte de protocolos de edad (marque "Use Old Protocolos Loader")
- Al encontrar CMT / cargadores APE, muestra un hallazgo parámetros (línea TX2, requerido Tipo de protocolo, etc)
- BB5 de control fijos flash_block_Data
- Información adicional de chips flash se muestra ahora a BB5 Alg arranque (VPP Información, tamaño de la viruta)
- Arreglado cuando arranque después de activar el teléfono DCT4 FTD trata de muertos
- Corregido "No se pudo descodificar MSID" cuando parpadea algunas DCT4 PPM archivos
- UPP ID está ahora representada en hexadecimal a Leer Info
- Se agregó detección si Pri / cámara Sec existe o se puede configurar
- Cambios menores y correcciones de errores
- Negro Piel presentó
- Corregido desbloquear DCT4 no ser ejecutado después de Procedimiento intermitente
- Versiones de complemento
Instalador v1.05
Principales aplicaciones x86 v1.0.0.9392
x86 Administrador de memoria v4.92
Nativo de controladores USB v1.0.0.4
USB-Pila Controladores v1.0.0.0
Bordo de arranque seguro v2.10
Principal a bordo de aplicaciones de Nokia v01.37
A bordo de emulación COM Código v1.00
A bordo de Tarjeta de Seguro Revisión v1.09
Cable de Conectividad Nokia Controladores v7.1.22.0
BB5 USB / FPIF sola línea / FPIF DualLine v20100410
DCT4 FPIF sola línea / USB v20100410
DCT4 Unlock Parches OBSOLETO
Comunicación Stack SSLv3-keys-06092008
Piel Stack v6.63

Gracias a todos los contribuyentes que nos apoyan! Gracias Moulnisky, PTT, miel ... Gracias Arash y otros ...

Donde descargar?

Principal Link: DESCARGAR

Mensaje modificado por SpLock el Apr 22 2010, 09:13 PM

[ferch]

hola, el link esta roto, podrias poner otro por favor.

[Movilcelulares]

ja.. aki esta un nuevo link

1. Por deskarga directa in the foro:

 CycloneB... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 16.18mb ) Número de descargas: 46


2. O x 4shared:

http://www.4shared.com/file/UiosuwbH/Cyclo...xInstaller.html

salu2

[danbusta]

aca hay otro que esta funkando

http://rapidshare.com/files/379159728/Cycl...oxInstaller.exe

[dapx]

Aqui lo último.

Cyclone Box Installer v1.06 Released (2010-04-23)

Some important bugs fixed related to DCT4 RSA Unlock, update with: http://rapidshare.com/files/379159728/Cycl...oxInstaller.exe

[Eliminado_geovanny78_*]

Aca les dejo para que descarguen

Fichero(s) Adjunto(s)

 CycloneB... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 16.26mb ) Número de descargas: 56

 

[SpLock]

** Cyclone fixed Installer v1.06 (DCT4) **

--------------------------------------------------------------------------------

!!! INSTALLER v1.06 !!!

(fixed DCT4 and some other critical bugs)

DOWNLOAD LINK
DOWNLOAD LINK

[Fixcell]

Cyclone MAJOR Update - New FBUS Protocol (X3,X6) - DCT4RSA(1661,5030) - COM Emulator

Hello, New Cyclone Box Installer is READY.

What's new?

Installer v1.05
23.04.2010

- Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones - E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
- Added support for BB5 FBUS New Protocol APE Loaders
- Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
- Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
- Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
- Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
- Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
- Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"
- Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !
- Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not ready",etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:

GR0103D101260C206C02
GR0103D101260C213402
GR0103D10126095A1F05
GR0103D10126095A1F07
GR0103D10126095A1F87
GR0103D1012601022C00
GR0103D1012601022E05
GR09733814140C206C02
GR0973381414095A1F05
GR0973381414095A1F07
GR0973381414095A1F87
GR097338141401022C00
ISL2TI020000093E2F30
NI00IIIIRR030C20C607
NI00IIIIRR03095B1F00
NI00IIIIRR03095B1F01
NI00IIIIRR030102F200
NI00IIIIRR030102F201
NI00IIIIRR030102F202
NI00IIIIRR030102F203
NI00IIIIRR0301035420
NIMMIIIIRRFF0A021001
NIMMIIIIRRFF094B2F01
NIMMIIIIRRFF06150018
NIMMIIIIRRFF06150110
ST090404003C06150018
ST090404004C06150018

- Added TX2 warning when certificate is being not accepted (common problem while writing RPL)
- Updated Nokia USB Connectivity Drivers to 7.1.22.0
- Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)
- Folder "StoredFiles" is no longer marked to Delete upon Uninstallation to keep old backup files
- Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up
- Factory defaults after flash are now defaultly ticket (BB5,DCT4)
- Mode transition manager added in firmware v01.37
- Software accept Mode Transision to "Normal" when phone goes to "Power Off"
- Flash Variants are displayed now in descending order
- SL Array readen now upon RPL Backup is Keyb/FBUS Count masked
- Now, all 7 codes are being sent to phone (some phones don't accept +7 codes - tested on N71)
- Fixed NCK Calculation for some mobiles (Security Section Checksum Error)
- When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database
- Fixed smartcard not responding for reset in some configurations
- Fixed "Failed to Read SP Info" on older RAPv2 phones
- Path manager - bug "/" fixed
- Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)
- SX4 Bypass is removed now (no need anymore)
- Improved sending CMT Secondary Loader
- Fixed TX2 test crash when phone is completly erased (TOC erased)
- Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database
- Improved Security Analysis, added HWC/CCC/Variant Certs Check
- Box Firmware : 01.0C, Access Violation Fixed
- Runtime Error when "Disable Skins" enabled fixed
- Taksbar problems fixed
- Fixed 1208 UEM Read/IMEI Rebuild
- N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)
- New Nokia Firmware introduced, improved stability a lot
- DCT4Plus relock fixed
- Mode transition improved
- BB5 USB Flashing fixed
- Factory Set problems fixed
- Fixed problems when dealing with RAP3v2 Phones
- Skin manager upgraded to v6.63
- HW Platform is now being readen upon Box Initialization
- Added support for CTF'2010 Platform
- Flashbus writing speed increased about 10%
- Flashbus FUR messages reading speed increased about 40%
- BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..
- After flashing, added average writing speed display
- BootAgent removed, now Bootloader upgrade is managed by middle-loader
- Main Firmware rewritten from scratch, old bugs gone away.
- MPU Added
- Improved Oscillator startup time, box hangup fixed in some cases
- Realtime clock not used anymore, too much hardware problems when box not started
- Fixed booting dead BB5 mobiles
- If bb5 booting fails, SW displays possible reason reported by new firmware
- BB5 is being try to boot now without hardware VCC switch
- Added USB Dualport transactions (increases speed)
- Added old protocols support (tick "Use Old Protocols Loader")
- Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)
- BB5 flash_block_Data checksum fixed
- Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)
- Fixed boot when after activating DCT4 FTD phone comes to dead
- Fixed "Failed to decode MSID" when flashing some PPM DCT4 files
- UPP ID is now represented as hex upon Read Info
- Added detection whether Pri/Sec camera exists or is configurable
- Minor changes and bugfixes
- Black Skin introduced
- Fixed DCT4 Unlock not being executed after Flashing Procedure
- Versions snap
Installer v1.05
Main x86 Application v1.0.0.9392
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.10
Onboard Main Nokia Application v01.37
Onboard COM Emulation Code v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.22.0
BB5 USB/FPIF Single Line/FPIF DualLine v20100410
DCT4 FPIF Single Line/USB v20100410
DCT4 Unlock Patches DEPRECATED
Communication Stack SSLv3-keys-06092008
Skin Stack v6.63

Thanks to all contributors which supporting us! Thanks Moulnisky, ptt, Honey... Thanks arash & others...

[Fixcell]

** Cyclone fixed Installer v1.06 (DCT4) **

!!! INSTALLER v1.06 !!!

(fixed DCT4 and some other critical bugs

Download Link 1
Download Link 2

[jorcomax11]

creditos supercell

What is new?
- Blackberry Module added, support all latest 210 MEPs. Unlock is free, and uses server to calculate Unlock Codes.
- If Logger fails somehow, you might still use manual mode (if you know IMEI and MEP)
- All DCT4 RPLs are free now (Included ASICs: 2,5,6,7,11)
- Skin changed back to white one (too many users complained)
- Improved mode transition between Main/Boot (timeout increased)
- Fixed problem when upon adding "New Path" in "Paths" module Root directory was empty
- CBUS stack improved, if box is disconeected during work, it tries to connect it again instead of "CBUS ERROR"
- Minor changes and bugfixes

How it works?
1. Run Blackberry Module
2. Install drivers (skip this if done already)
3. Click "Read Phone"
4. Connect phone to computer
5. Unlock using calculated codes


Download aqui http://www.clangsm.com/forum/index.php?showtopic=104802

Mensaje modificado por jorcomax11 el May 7 2010, 10:22 PM

[fredovi]

bueno amigos aqui les dejo la descarga directa
solo copia y pegas este archivo en c/archivos de programa/cyclone
lo ejecuta y estamos listos

Mensaje modificado por fredovi el May 11 2010, 01:06 PM

Fichero(s) Adjunto(s)

 Cyclone1... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 4.95mb ) Número de descargas: 148
 BB_cyclo... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 70.57k ) Número de descargas: 1

 

[miguelcpm22]

v01.38 Nokia Firmware is uploaded to server

Changes:
- Fixed problem when Nokia correct BB5 NCKs was calculated only for levels +1,+2,+3, codes +4,+5,+6,+7 was wrongly calculated due to memory leak of calculation routines.
- Minor (or non enveloped yet ) changes and bugfixes

This is server-side update only, don't ask for "exe" file because new "exe" is not released at moment, just use Maintenance Tool and upgrade your box.

Every box have 3 tries of upgrading firmware, please be patient during upgrade process because it may take some time and if you will cancel it (When software will act as a "hangup") you will lose upgrade logs and will need ask us for adding another credits...



Best Regards,
Cyclone Team

[Eliminado_.::TECNICELL::._*]

Nokia v01.38 firmware se carga en el servidor

Cambios:
- Arreglado problema cuando NCKs Nokia BB5 correcta se calculó sólo en los niveles 1, 2, 3, 4 códigos, +5, +6, +7 se había calculado mal debido a la pérdida de memoria de las rutinas de cálculo.
- Menor (o no envuelto todavía) los cambios y correcciones de errores

Esta es la actualización del servidor únicamente, no piden "exe" ya que los nuevos "exe" no se libera en el momento, sólo tiene que utilizar Herramienta de mantenimiento y actualización de su cuadro.

Cada caja tiene 3 intentos de actualizar el firmware, por favor tenga paciencia durante el proceso de actualización, ya que puede tomar algún tiempo y si se quiere cancelarla (Cuando el software funcionará como un colgado ") usted perderá actualizar los registros y deberán pedir a nosotros para sumar otra créditos ...



Saludos cordiales,
Cyclone Team

[jnrrr]

Nokia v01.38 firmware se carga en el servidor

Cambios:
- Arreglado problema cuando NCKs Nokia BB5 correcta se calculó sólo en los niveles 1, 2, 3, 4 códigos, +5, +6, +7 se había calculado mal debido a la pérdida de memoria de las rutinas de cálculo.
- Menor (o no envuelto todavía) los cambios y correcciones de errores

Esta es la actualización del servidor únicamente, no piden "exe" ya que los nuevos "exe" no se libera en el momento, sólo tiene que utilizar Herramienta de mantenimiento y actualización de su cuadro.

Cada caja tiene 3 intentos de actualizar el firmware, por favor tenga paciencia durante el proceso de actualización, ya que puede tomar algún tiempo y si se quiere cancelarla (Cuando el software funcionará como un colgado ") usted perderá actualizar los registros y deberán pedir a nosotros para sumar otra créditos ...
Saludos cordiales,
Cyclone Team

Buenas, no entiendo bien lo que quiere decir de los niveles BB5 1,2,3,4. Quiere decir que ya es posible liberar los N70, 6680 y demas? Me lo podria indicar?
muchas gracias.

1 saludo.

[arnoldo0945]

Cyclone EVOLUTION ! Added FREE Clip Mode, Added FREE Infineon XGold Flashing & More..

--------------------------------------------------------------------------------

Hi to all
New Cyclone Box Installer, Firmware, Bootloader, is ready!
Most important changes:

=====================
Installer v1.07
30.06.2010
=====================
- New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)
- New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)
- Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.
- XGold: Support for dead phones flashing
- XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)
- XGold: Supports bauds 115200,230400,460800,921600
- XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly - wil select corect falshing method.
- XGold: Supports for changing phone PPM/CNT or/and MCU
- XGold: Support for latest 2010 PBL/EBL Loaders
- Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.
- Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).
- Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:
- Clip: Can unlock any DCT4+ phone within 2 secs (without PC)
- Clip: Can repair Contact Service (if caused by damaged simlock)
- Clip: Can Rebuild Simlock Area
- Clip: Can reset security code of most DCT4/BB5 phones
- Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones
- Clip: 100% Safe, fast and easy to use
- You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.
- New Secure Bootloader Agent v3.00 Released
- Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)
- New Secure Bootloader v2.12 have been released
- Bootloader: Added Clip Detection
- Bootloader: Fixed floating (blinking) "VBAT" port
- Bootloader: Added support for some new types of smartcard
- Bootloader: Improved startup time
- Bootloader: Improved security
- Bootloader: Minor changes and bugfixes
- Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")
- The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)
- Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .
- Blackberry IMEI Check fixed
- Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)
- Added Warning confirmation before Writing Alien SD Keys
- Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.
- Main Firmware v01.41 Released
- Box HW Rev A11E Added
- Minor changes and bugfixes

How to run "Clip Mode"?
1. Attach Clip Adapter to box "Diagnostic Port"
2. Connect Clip Adapter "USB" cable to box USB Input
3. Connect 9V battery to Clip Adapter
4. Connect phone to "Service Port"

How to use "Clip Mode"?
Once Clip Mode is run, you need use S1 Button to change it's mode.
Default clip mode is:
RED (slowly blinking) - read phone info via FBUS
other modes you can select pressing S1 button:
GREEN - Unlock/Repair simlock
BLUE - reset securitycode/sec.code attempts

Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.

Maybe some movie, how to use it?
Youtube: YouTube - Cyclone Box used as Clip with latest addon

Where to get clip hardware?
You can ask any of Cyclone Box distributor/reseller.
Hardware is relative cheap - 15 usd (end-user price).
We will update clip soon with other functions.
It's first official Cyclone Addon.
Keep note it is CYCLONE ADDON, and same Clip Adaptor - it's just adaptor and still Cyclone Box is needed to work!

Where from download?
RapidShare: 1-CLICK Web hosting - Easy Filehosting
Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.

Best Regards,
Stay Tuned,
Cyclone Team

--------------------------------------------------------------------------------
Last edited by karwos; Today at 13:43.

[krlos_182x]

Cyclone EVOLUTION ! Added FREE Clip Mode, Added FREE Infineon XGold Flashing & More.. (2010-07-01)


New Cyclone Box Installer, Firmware, Bootloader, is ready!
Most important changes:
* ===================== Installer v1.07 30.06.2010 =====================
- New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)
- New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)
- Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.
- XGold: Support for dead phones flashing
- XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)
- XGold: Supports bauds 115200,230400,460800,921600
- XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly
- wil select corect falshing method.
- XGold: Supports for changing phone PPM/CNT or/and MCU
- XGold: Support for latest 2010 PBL/EBL Loaders
- Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.
- Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).
- Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:
- Clip: Can unlock any DCT4+ phone within 2 secs (without PC)
- Clip: Can repair Contact Service (if caused by damaged simlock)
- Clip: Can Rebuild Simlock Area
- Clip: Can reset security code of most DCT4/BB5 phones
- Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones
- Clip: 100% Safe, fast and easy to use
- You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.
- New Secure Bootloader Agent v3.00 Released
- Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)
- New Secure Bootloader v2.12 have been released
- Bootloader: Added Clip Detection
- Bootloader: Fixed floating (blinking) "VBAT" port
- Bootloader: Added support for some new types of smartcard
- Bootloader: Improved startup time
- Bootloader: Improved security
- Bootloader: Minor changes and bugfixes
- Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")
- The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)
- Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .
- Blackberry IMEI Check fixed
- Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)
- Added Warning confirmation before Writing Alien SD Keys
- Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.
- Main Firmware v01.41 Released
- Box HW Rev A11E Added
- Minor changes and bugfixes


How to run "Clip Mode"?
1. Attach Clip Adapter to box "Diagnostic Port"
2. Connect Clip Adapter "USB" cable to box USB Input
3. Connect 9V battery to Clip Adapter
4. Connect phone to "Service Port"
*
How to use "Clip Mode"?
Once Clip Mode is run, you need use S1 Button to change it's mode.
Default clip mode is:
RED (slowly blinking)
- read phone info via FBUS
other modes you can select pressing S1 button:
GREEN
- Unlock/Repair simlock
BLUE
- reset securitycode/sec.code attempts


Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.
*
Maybe some movie, how to use it?
Youtube: YouTube
- Cyclone Box used as Clip with latest addon
*
Where to get clip hardware?
You can ask any of Cyclone Box distributor/reseller.
Hardware is relative cheap
- 15 usd (end-user price).
We will update clip soon with other functions.
It's first official Cyclone Addon.
Keep note it is CYCLONE ADDON, and same Clip Adaptor
- it's just adaptor and still Cyclone Box is needed to work!



Where from download?
RapidShare: 1-CLICK Web hosting
- Easy Filehosting
*
Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.
*
Best Regards,
Stay Tuned,
Cyclone Team