Actualizaciones De Cyclone!!!! Solo Actualizaciones, Cualquier Otro Mensaje Es Eliminado |
 |
|
Bienvenido, invitado ( Identificarse | Registrarse )
 Clan GSM - Unión de los Expertos en Telefonía Celular > Cajas y Dongles GSM > Cementerio de Cajas (Sin Actualizaciones ni Soporte) > CYCLONE Box
|
  |
Actualizaciones De Cyclone!!!! Solo Actualizaciones, Cualquier Otro Mensaje Es Eliminado |
 Jun 7 2011, 03:45 PM
Publicado:
#81
|
|
|
Colaborador del Clan  Grupo: Miembros Mensajes: 306 Agradecimientos: 186 Registrado: 21-April 10 Desde: San Javier, 7° región, Chile Miembro No.: 98,746 Pais: 
 |
New Cyclone Box Installer v1.14 is Ready.
What's new? Quote: ===================== Installer v1.14 07.06.2011 ===================== - New BB5 FBUS/USB Loaders v11.16.0 Introduced - Unique Data Reading for RAPIDO based phones by USB added - Unique Data Reading for RAPU based phones by USB added - SL2 Unlock for Old Hash (E51..,..) and New Hash (6120c,6760) just by USB cable - SL3 Unlock by reading LBF data for all SL3 RAPIDO/RAPU Phones - Standalone Superdongle Auth - without SD key corruption - SD Keys Repair - Security Analyze - RPL Backup - All this using just usb cable... - Our loaders automatically set phone to LocalMode after reading LogData - tested with N97, seems 1st in world - RAPIDO phones before reading USB LogFile, needs to be manually set into FlashMode. Apporiate messagebox will be displayed with instructions (replug battery, cable, etc..). If your phone is RAPU or RAP4 based, you don't need to reject battery or do nothing - just click OK and it will switch to RAW mode directly. - We also added support for FUR-like flashing for RAPIDO phones. That means it's possible to flash these phones FBUS-like (completly erased, etc - FBUS protocol emulation). However, because of many problems we've disabled it in current release. You can test it manually by placing "v11.16.0" RAPIDO loaders into \Loaders\BB5\FPIF32BIT. * Known problems with RAPIDO 11.16.0 loaders: * FBUS support is broken * Readed Certificates via USB is broken (Control transactions support up to ~0x90 bytes of upcoming data) * Probably not working with Axxxx ROMS (E51) * Lot of other issues observed - The FUR-like flashing (not ADL though) will be probably enabled in next version after closer investigation - Fixed oclHashCat COD File bugs (occurs when last digit of imei is 0) - Box Firmware v01.62 Released - Minor changes and bugfixes All, of course, standalone and free Tested with: Nokia C5 Code: Reading SL3 LOG File... [Nokia C5-00 USB Phonet]: Port opened OK! MCU Version V ICPR82_10w18.5.2 MCU Date 16-07-10 Product RM-645 (Nokia C5) Manufacturer © Nokia IMEI 354847045236599 Mastercode 5246147017 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "24200117BD9C03444F3626EDEECC564255FB04E4.C0003160" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia C5-00 USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 24200117BD9C03444F3626EDEECC564255FB04E4 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_BOOT_ROM_CRC: E693EF0D CMT_SECURE_ROM_CRC: AC22615B CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020004000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "24200117BD9C03444F3626EDEECC564255FB04E4.C0003160" Success! Nokia 5630 XM Code: Reading SL3 LOG File... [Nokia 5630 XpressMusic USB Phonet]: Port opened OK! MCU Version V ICPR82_09w24.1 MCU Date 15-06-09 Product RM-431 (Nokia 5630 XpressMusic) Manufacturer © Nokia IMEI 359350021136722 Mastercode 3226214523 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "1CE001126A2F0344C02621363B888F748DD36748.C0003160" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia 5630 XpressMusic USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104 CMT_EM_ASIC_ID: 00000C34 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695 CMT_BOOT_ROM_CRC: 3E273BF6 CMT_SECURE_ROM_CRC: 37BE26FA CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "1CE001126A2F0344C02621363B888F748DD36748.C0003160" Success! Nokia N97 Code: WARNING: Failed to read RAP Public ID Reading CYC file from phone... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103 CMT_EM_ASIC_ID: 00000296 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 0CB000038A720052E7F618F98DD2D5F6E5C93100 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND Requested Algorithm: XSR 1.5 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "0CB000038A720052E7F618F98DD2D5F6E5C93100.C0003160" Nokia 5530 Code: Reading CYC file from phone... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105 CMT_EM_ASIC_ID: 00000296 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 09E001021288005207821607AFCF935B1795E0E9 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020004000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND Requested Algorithm: XSR 1.5 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "09E001021288005207821607AFCF935B1795E0E9.C0003160" Nokia 5800 Code: WARNING: Failed to read RAP Public ID Reading CYC file from phone... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND Requested Algorithm: XSR 1.5 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "16900018F3740052C3ECA61A74BBE7E9A3A34FCE.C0003160" Nokia 5230 Code: [Nokia 5230 USB Phonet]: Port opened OK! MCU Version V ICPR72_10w04.5 MCU Date 22-03-10 Product RM-588 (Nokia 5230) Manufacturer © Nokia IMEI 354336049859812 Mastercode 2260374254 IMEI Spare 3A45330694588901 IMEI SV 3345330694588911F1000000 PPM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 CNT v 001_000, 05-03-10, vanilla, RM588 PSN 0640828AA Product Code 059D3Q3 Module Code 0204359 Basic Product Code 059C249 PSD 0000000000000000 LPSN 0 APE SW V 20.0.005 APE Variant V 20.0.005V 20.0.005 V 20.0.005 APE Test rm588_ENO_x_09wk43v0.050 APE HW 256 APE ADSP 256 APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708. RETU 16 TAHVO 22 AHNE 11 HW 0512o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 PCI o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 UEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 UPP 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 RFIC 17141716 DSP simon_ICPR72_10w05 LCD 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 BT 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 ADSP Sw 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 ADSP DevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 ADSP RevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 AEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 Flip MCUSW 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 Simlock Server SIMLOCK SERVER Simlock Key 2343000000000000 Simlock Profile 8000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23430F Auto Selecting Flash Files on User Request... [Nokia 5230 USB Phonet]: Port opened OK! Product Code: 059D3Q3 No Flash Datapackage installed for this Phone! Reading SL3 LOG File... [Nokia 5230 USB Phonet]: Port opened OK! MCU Version V ICPR72_10w04.5 MCU Date 22-03-10 Product RM-588 (Nokia 5230) Manufacturer © Nokia IMEI 354336049859812 Mastercode 2260374254 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "1DC0000EB6A000524EFB32C0210D25187179FFC2.C0000067" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia 5230 USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103 CMT_EM_ASIC_ID: 00000296 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 1DC0000EB6A000524EFB32C0210D25187179FFC2 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371 CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "1DC0000EB6A000524EFB32C0210D25187179FFC2.C0000067" Success! Nokia E52 Code: [Nokia E52 USB Phonet]: Port opened OK! MCU Version V ICPR82_09w46.3 MCU Date 28-12-09 Product RM-469 (Nokia E52) Manufacturer © Nokia IMEI 355216035074023 Mastercode 2723652247 IMEI Spare 3A55120653700402 IMEI SV 3355120653700432F9000000 PPM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 PSN SEL726460 Product Code 0588653 Basic Product Code 0565921 PSD 0000000000000000 LPSN 0 WLAN MAC A87E33CB8DCE APE SW 031.012 APE Variant 031.012031.012.01.01031.012.241.02 APE Test 0.072 APE HW 256 APE ADSP 256 APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652. RETU 40 TAHVO 00 AHNE 11 HW 6000o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 PCI o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 UEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 UPP 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 RFIC |Vapaus_5.1 | Aura_?.? DSP ICPR82_09w46.2_RIOo256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 LCD 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 BT 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 ADSP Sw 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 ADSP DevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 ADSP RevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 AEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 Flip MCUSW 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 Simlock Server SIMLOCK SERVER Simlock Key 2440700000000000 Simlock Profile 0000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [1,2] State: OPENED Type: GID Data: FFFF Simlock [1,3] State: OPENED Type: GID Data: FFFF Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [2,2] State: OPENED Type: GID Data: FFFF Simlock [2,3] State: OPENED Type: GID Data: FFFF Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [3,2] State: OPENED Type: GID Data: FFFF Simlock [3,3] State: OPENED Type: GID Data: FFFF Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [4,2] State: OPENED Type: GID Data: FFFF Simlock [4,3] State: OPENED Type: GID Data: FFFF Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [5,2] State: OPENED Type: GID Data: FFFF Simlock [5,3] State: OPENED Type: GID Data: FFFF Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [6,2] State: OPENED Type: GID Data: FFFF Simlock [6,3] State: OPENED Type: GID Data: FFFF Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [7,2] State: OPENED Type: GID Data: FFFF Simlock [7,3] State: OPENED Type: GID Data: FFFF Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Auto Selecting Flash Files on User Request... [Nokia E52 USB Phonet]: Port opened OK! Product Code: 0588653 No Flash Datapackage installed for this Phone! Reading SL3 LOG File... [Nokia E52 USB Phonet]: Port opened OK! MCU Version V ICPR82_09w46.3 MCU Date 28-12-09 Product RM-469 (Nokia E52) Manufacturer © Nokia IMEI 355216035074023 Mastercode 2723652247 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "086002021A660344B60B626D2CBDBC90D96BFEBE.C000249F" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia E52 USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104 CMT_EM_ASIC_ID: 00001040 CMT_EM_ASIC_ID: 00001030 CMT_PUBLIC_ID: 086002021A660344B60B626D2CBDBC90D96BFEBE CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695 CMT_BOOT_ROM_CRC: 3E273BF6 CMT_SECURE_ROM_CRC: 37BE26FA CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020004000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "086002021A660344B60B626D2CBDBC90D96BFEBE.C000249F" Success! Nokia 6700 Code: [Nokia 6700 classic USB Phonet]: Port opened OK! MCU Version V 10.50 MCU Date 23-11-09 Product RM-470 (Nokia 6700 classic) Manufacturer © Nokia IMEI 353790048150162 Mastercode 165217462 IMEI Spare 3A35970084511006 IMEI SV 3335970084511036F9000000 PPM V 10.50, 23-11-09, RM-470, © Nokia , C CNT Content: c_gb_chrome, 3 IE, 23-11-09, RM-470, © Nokia , , PSN KFW480968 Product Code 0585990 Module Code 0204199 Basic Product Code 0590482 PSD 0000000000000000 LPSN 0 RETU 34 TAHVO 00 AHNE 11 HW 1010 RFIC |Vapaus_5.1 | Aura_?.? DSP ICPR81_09w37 LCD TPO BT 410B-v170 Simlock Server SIMLOCK SERVER Simlock Key 2720500015194980 Simlock Profile 8000000000000002 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: OPENED Type: MCC-MNC Data: 27205F Simlock [2,1] State: OPENED Type: MCC-MNC Data: 23594F Simlock NCK #pw+737N24288048822+1# Auto Selecting Flash Files on User Request... [Nokia 6700 classic USB Phonet]: Port opened OK! Product Code: 0585990 This is Valid BB5 Product No variant found with given Product Code, selecting first one Reading SL3 LOG File... [Nokia 6700 classic USB Phonet]: Port opened OK! MCU Version V 10.50 MCU Date 23-11-09 Product RM-470 (Nokia 6700 classic) Manufacturer © Nokia IMEI 353790048150162 Mastercode 165217462 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "2B60010FD08C0344B84E013C20C370B731580C87.C000249F" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia 6700 classic USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104 CMT_EM_ASIC_ID: 00000C34 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 2B60010FD08C0344B84E013C20C370B731580C87 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695 CMT_BOOT_ROM_CRC: 3E273BF6 CMT_SECURE_ROM_CRC: 37BE26FA CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0098004000000031, Toshiba, ONENAND Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "2B60010FD08C0344B84E013C20C370B731580C87.C000249F" Success! Nokia 5800 Code: WARNING: Failed to read RAP Public ID Reading CYC file from phone... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND Requested Algorithm: XSR 1.5 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 © 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "16900018F3740052C3ECA61A74BBE7E9A3A34FCE.C0003160" N8 tested too but missed log somewhere Firmware v01.62 is required for this installer. Where from download? http://www.karwos.hk/CycloneBoxInstaller.exe Best Regards, Cyclone Team |
 |
 
|
A continuacion 1 usuario(s) le Agradece(n) a SoporteMovil por su Colaboracion: sahorisan | |
| Anunciante Autorizado |
Jun 7 2011, 03:45 PM
Publicado:
#
|
 Estas ofertas pudieran interesarte. |
|
|
|
|
|
Jun 7 2011, 03:54 PM
Publicado:
#82
|
|
 Maestro del Clan Grupo: Expulsados Mensajes: 915 Agradecimientos: 822 Registrado: 20-November 08 Desde: lima peru Miembro No.: 12,073 Pais: 
|
CycloneBox instalador v1.14 Fecha de lanzamiento - BB5 SL2/SL3 USB Unlock/SX4Auth/SDRepair Añadido
Hola a todos! Nueva Cyclone Box instalador v1.14 está listo. ¿Qué hay de nuevo? CÓDIGO Instalador v1.14 07.06.2011 ===================== - Nueva BB5 FBUS / Cargadores USB v11.16.0 Introducido - Único de Datos de lectura para teléfonos RAPIDO basado en USB agregó - Único de Datos de lectura para teléfonos RAPU basado en USB agregó - SL2 desbloqueo de Old Hash (.,..) E51. y Hash Nueva (6120c, 6760) con sólo un cable USB - SL3 desbloqueo mediante la lectura de los datos LBF para todos SL3 RAPIDO Móviles / RAPU - Independiente Superdongle autenticación - sin corrupción SD clave - Claves SD Reparación - Analizar de Seguridad - Copia de seguridad RPL - Todo esto usando sólo un cable USB ... - Nuestros cargadores de teléfono para que automáticamente LocalMode después de leer LogData - probado con N97, parece primero en el mundo - RAPIDO teléfonos USB antes de leer archivo de registro, debe establecer manualmente en Flashmode. messagebox Apporiate se mostrará con las instrucciones (vuelva a conectar la batería, cable, etc.). Si su teléfono está RAPU y basados en la RAP4, no es necesario rechazar la batería o no hacer nada - simplemente haga clic en Aceptar y pasará a modo RAW directamente. - También se ha añadido soporte para la piel-como el intermitente para teléfonos RAPIDO. Eso significa que es posible flash estos teléfonos FBUS-como (completamente borrado, etc - emulación de protocolos FBUS). Sin embargo, a causa de muchos problemas que hemos deshabilitado en la versión actual. Puedes probarlo de forma manual mediante la colocación de "v11.16.0" cargadores RAPIDO en \ Cargadores \ BB5 \ FPIF32BIT. * Problemas conocidos con RAPIDO 11.16.0 cargadores: * Soporte FBUS se rompe * Certificados leída a través de USB está roto (operaciones de control de soportar hasta ~ 0x90 bytes de datos de próxima) * Probablemente no trabajar con Axxxx ROM (E51) * Lote de otras cuestiones observadas - El FUR-como intermitente (aunque no ADL) será probablemente este habilitado en la próxima versión después de una investigación más - Se ha corregido errores oclHashCat COD archivo (se produce cuando el último dígito de IMEI es 0) - Caja de lanzamiento del firmware v01.62 - Cambios menores y correcciones de errores Todos, por supuesto, independiente y libre Probado con: Nokia C5 CÓDIGO Reading SL3 LOG File... [Nokia C5-00 USB Phonet]: Port opened OK! MCU Version V ICPR82_10w18.5.2 MCU Date 16-07-10 Product RM-645 (Nokia C5) Manufacturer (c) Nokia IMEI 354847045236599 Mastercode 5246147017 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "24200117BD9C03444F3626EDEECC564255FB04E4.C0003160" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia C5-00 USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104 CMT_EM_ASIC_ID: 00000C35 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 24200117BD9C03444F3626EDEECC564255FB04E4 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B CMT_BOOT_ROM_CRC: E693EF0D CMT_SECURE_ROM_CRC: AC22615B CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020004000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "24200117BD9C03444F3626EDEECC564255FB04E4.C0003160" Success! Nokia 5630 XM CÓDIGO IMEI 359350021136722 Mastercode 3226214523 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "1CE001126A2F0344C02621363B888F748DD36748.C0003160" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia 5630 XpressMusic USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104 CMT_EM_ASIC_ID: 00000C34 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695 CMT_BOOT_ROM_CRC: 3E273BF6 CMT_SECURE_ROM_CRC: 37BE26FA CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "1CE001126A2F0344C02621363B888F748DD36748.C0003160" Success! Nokia N97 CÓDIGO WARNING: Failed to read RAP Public ID Reading CYC file from phone... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103 CMT_EM_ASIC_ID: 00000296 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 0CB000038A720052E7F618F98DD2D5F6E5C93100 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND Requested Algorithm: XSR 1.5 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "0CB000038A720052E7F618F98DD2D5F6E5C93100.C0003160" Nokia 5530 CÓDIGO Reading CYC file from phone... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105 CMT_EM_ASIC_ID: 00000296 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 09E001021288005207821607AFCF935B1795E0E9 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020004000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND Requested Algorithm: XSR 1.5 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "09E001021288005207821607AFCF935B1795E0E9.C0003160" Nokia 5800 Code: WARNING: Failed to read RAP Public ID Reading CYC file from phone... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND Requested Algorithm: XSR 1.5 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "16900018F3740052C3ECA61A74BBE7E9A3A34FCE.C0003160" Nokia 5230 CÓDIGO [Nokia 5230 USB Phonet]: Port opened OK! MCU Version V ICPR72_10w04.5 MCU Date 22-03-10 Product RM-588 (Nokia 5230) Manufacturer (c) Nokia IMEI 354336049859812 Mastercode 2260374254 IMEI Spare 3A45330694588901 IMEI SV 3345330694588911F1000000 PPM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 CNT v 001_000, 05-03-10, vanilla, RM588 PSN 0640828AA Product Code 059D3Q3 Module Code 0204359 Basic Product Code 059C249 PSD 0000000000000000 LPSN 0 APE SW V 20.0.005 APE Variant V 20.0.005V 20.0.005 V 20.0.005 APE Test rm588_ENO_x_09wk43v0.050 APE HW 256 APE ADSP 256 APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708. RETU 16 TAHVO 22 AHNE 11 HW 0512o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 PCI o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 UEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 UPP 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 RFIC 17141716 DSP simon_ICPR72_10w05 LCD 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 BT 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 ADSP Sw 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 ADSP DevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 ADSP RevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 AEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 Flip MCUSW 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050 Simlock Server SIMLOCK SERVER Simlock Key 2343000000000000 Simlock Profile 8000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23430F Auto Selecting Flash Files on User Request... [Nokia 5230 USB Phonet]: Port opened OK! Product Code: 059D3Q3 No Flash Datapackage installed for this Phone! Reading SL3 LOG File... [Nokia 5230 USB Phonet]: Port opened OK! MCU Version V ICPR72_10w04.5 MCU Date 22-03-10 Product RM-588 (Nokia 5230) Manufacturer (c) Nokia IMEI 354336049859812 Mastercode 2260374254 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "1DC0000EB6A000524EFB32C0210D25187179FFC2.C0000067" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia 5230 USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103 CMT_EM_ASIC_ID: 00000296 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 1DC0000EB6A000524EFB32C0210D25187179FFC2 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371 CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "1DC0000EB6A000524EFB32C0210D25187179FFC2.C0000067" Success! Nokia E52 CÓDIGO Mastercode 2723652247 IMEI Spare 3A55120653700402 IMEI SV 3355120653700432F9000000 PPM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 PSN SEL726460 Product Code 0588653 Basic Product Code 0565921 PSD 0000000000000000 LPSN 0 WLAN MAC A87E33CB8DCE APE SW 031.012 APE Variant 031.012031.012.01.01031.012.241.02 APE Test 0.072 APE HW 256 APE ADSP 256 APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652. RETU 40 TAHVO 00 AHNE 11 HW 6000o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 PCI o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 UEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 UPP 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 RFIC |Vapaus_5.1 | Aura_?.? DSP ICPR82_09w46.2_RIOo256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 LCD 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 BT 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 ADSP Sw 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 ADSP DevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 ADSP RevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 AEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 Flip MCUSW 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469 Simlock Server SIMLOCK SERVER Simlock Key 2440700000000000 Simlock Profile 0000000000000000 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [1,2] State: OPENED Type: GID Data: FFFF Simlock [1,3] State: OPENED Type: GID Data: FFFF Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [2,2] State: OPENED Type: GID Data: FFFF Simlock [2,3] State: OPENED Type: GID Data: FFFF Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [3,2] State: OPENED Type: GID Data: FFFF Simlock [3,3] State: OPENED Type: GID Data: FFFF Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [4,2] State: OPENED Type: GID Data: FFFF Simlock [4,3] State: OPENED Type: GID Data: FFFF Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [5,2] State: OPENED Type: GID Data: FFFF Simlock [5,3] State: OPENED Type: GID Data: FFFF Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [6,2] State: OPENED Type: GID Data: FFFF Simlock [6,3] State: OPENED Type: GID Data: FFFF Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [7,2] State: OPENED Type: GID Data: FFFF Simlock [7,3] State: OPENED Type: GID Data: FFFF Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Auto Selecting Flash Files on User Request... [Nokia E52 USB Phonet]: Port opened OK! Product Code: 0588653 No Flash Datapackage installed for this Phone! Reading SL3 LOG File... [Nokia E52 USB Phonet]: Port opened OK! MCU Version V ICPR82_09w46.3 MCU Date 28-12-09 Product RM-469 (Nokia E52) Manufacturer (c) Nokia IMEI 355216035074023 Mastercode 2723652247 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "086002021A660344B60B626D2CBDBC90D96BFEBE.C000249F" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia E52 USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104 CMT_EM_ASIC_ID: 00001040 CMT_EM_ASIC_ID: 00001030 CMT_PUBLIC_ID: 086002021A660344B60B626D2CBDBC90D96BFEBE CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695 CMT_BOOT_ROM_CRC: 3E273BF6 CMT_SECURE_ROM_CRC: 37BE26FA CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020004000000031, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "086002021A660344B60B626D2CBDBC90D96BFEBE.C000249F" Success! Nokia 6700 CÓDIGO [Nokia 6700 classic USB Phonet]: Port opened OK! MCU Version V 10.50 MCU Date 23-11-09 Product RM-470 (Nokia 6700 classic) Manufacturer (c) Nokia IMEI 353790048150162 Mastercode 165217462 IMEI Spare 3A35970084511006 IMEI SV 3335970084511036F9000000 PPM V 10.50, 23-11-09, RM-470, (c) Nokia , C CNT Content: c_gb_chrome, 3 IE, 23-11-09, RM-470, (c) Nokia , , PSN KFW480968 Product Code 0585990 Module Code 0204199 Basic Product Code 0590482 PSD 0000000000000000 LPSN 0 RETU 34 TAHVO 00 AHNE 11 HW 1010 RFIC |Vapaus_5.1 | Aura_?.? DSP ICPR81_09w37 LCD TPO BT 410B-v170 Simlock Server SIMLOCK SERVER Simlock Key 2720500015194980 Simlock Profile 8000000000000002 Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: OPENED Type: MCC-MNC Data: 27205F Simlock [2,1] State: OPENED Type: MCC-MNC Data: 23594F Simlock NCK #pw+737N24288048822+1# Auto Selecting Flash Files on User Request... [Nokia 6700 classic USB Phonet]: Port opened OK! Product Code: 0585990 This is Valid BB5 Product No variant found with given Product Code, selecting first one Reading SL3 LOG File... [Nokia 6700 classic USB Phonet]: Port opened OK! MCU Version V 10.50 MCU Date 23-11-09 Product RM-470 (Nokia 6700 classic) Manufacturer (c) Nokia IMEI 353790048150162 Mastercode 165217462 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "2B60010FD08C0344B84E013C20C370B731580C87.C000249F" Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia 6700 classic USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104 CMT_EM_ASIC_ID: 00000C34 CMT_EM_ASIC_ID: 00000C30 CMT_PUBLIC_ID: 2B60010FD08C0344B84E013C20C370B731580C87 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695 CMT_BOOT_ROM_CRC: 3E273BF6 CMT_SECURE_ROM_CRC: 37BE26FA CMT Ready! New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0098004000000031, Toshiba, ONENAND Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "2B60010FD08C0344B84E013C20C370B731580C87.C000249F" Success! Nokia 5800 CÓDIGO WARNING: Failed to read RAP Public ID Reading CYC file from phone... Booting CMT... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103 CMT_EM_ASIC_ID: 00000295 CMT_EM_ASIC_ID: 00000B22 CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE CMT_BOOT_ROM_CRC: 4B9B7510 CMT_SECURE_ROM_CRC: 3E691FF8 CMT Ready! New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND Requested Algorithm: XSR 1.5 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs Custom loader running OK! Working... Readed OK, Saving to "16900018F3740052C3ECA61A74BBE7E9A3A34FCE.C0003160" N8 probado demasiado, pero se perdió en algún lugar de registro Firmware v01.62 es necesario para esta instalación. ¿De dónde descargar? http://www.karwos.hk/CycloneBoxInstaller.exe Saludos cordiales, Ciclón equipo |
|
|
|
A continuacion 5 usuario(s) le Agradece(n) a TELCEL por su Colaboracion: dariofer, davidquintero, delaquetecuen, dunkelherz, lopez779 | |
 Jun 19 2011, 10:26 AM
Publicado:
#83
|
|
|
Maestro del Clan Grupo: Expulsados Mensajes: 915 Agradecimientos: 822 Registrado: 20-November 08 Desde: lima peru Miembro No.: 12,073 Pais:
|
Cyclone Box Installer v1.15 Released
Hi, new update for Cyclone Box is Ready. What's new ? CÓDIGO Quote: ===================== Installer v1.15 18.06.2011 ===================== - Added READING DCT4+/XGold1 Encrypted Security Code from DCT4+ Based phone (previously shown as Crypted DCT4+) - of course WITHOUT data loss - seems 1st in the world - Added RESET (to 12345) DCT4+/XGold1 Encrypted Security Code from DCT4+ Based phone - of course WITHOUT data loss - seems 1st in the world - Added Reading Full RPL (NPC,CCC,HWC,SIMLOCK,SD,...) from Dead/Downgraded/Security Wrong BB5 Units - seems 1st in world. If phone doesn't power on (Stuck on Nokia logo, or completly dead), you can now dump full RPL file in order to Full Erase your phone and revive it. Softwar before dumping RPL in Recovery mode, will ask user of doing so. So in any case of reviving downgraded phone is: 1. Create RPL from Dead Phone 2. Full Erase 3. Write any SW version 4. Write previously backed-up RPL file 5. Authorize with SuperDongle 6. Write virgin PM - Added (fixed) NCK Counter Reset for XGold2 based phones - SecurityBlock is now backed-up before NCK Counters Reset, just in case - XGold1 Dead units booting fixed - Separate button for Receiving L7 Code for LBF added - Fixed DCT4 Security Counter Attempts Reset for some DCT4 variants - PMM Managment Tab added to BB5 Security Tab - Auto-Imei RESTORE added. Used if you have corrupted your imei, but having valid NPC file. Will scan StoredFiles for CRT file matching with CMT Public ID and automaticlly write it. - Added DCC camera Hardware Fault alert on DCC repair - some units is hardware fault and repair is not possible (DCC file not found) - XGold1 PMM parsing fixed (While reading LBF, Simlock table not found for some operators/phones) - XGold2 Flashing problems fixed (Invalid pointer) - USB transactions module rewritten - Full Erase button added for BB5 mobiles. No need to know FlashChip mapping and size - it's scanned automaticlly. It will erase CMT flash completly. Make sure RPL and PM is readed before erase!!! - Added "Just NPC" option used with "Erase Certificates". Used to delete only NPC certificate (corrupt IMEI and switch phone-on to make necessary job ... with IMEI corrupted phone will switch on even without valid security area). You can use this function to dump PM from non-working phone. Don't forget to CREATE RPL FROM PHONE first! Else you will get corrupted IMEI. - "Force Use Server" added for SX4 Authorization. - Fixed AutoSelecting bug - Fixed problem with parsing DCT4 variants when no DCT4 products installed - Fixed problem with parsing BB5 variants when no BB5 products installed - Index out of bound (0) fixed - Plain RPL is checked now by default - Removed "Bootloader upgrade problem" message, as caused too much confusion - Security Problem #1 and #2 Fixed (anti-idiot-fix) - Added additional Security Problem #5 message for Reinstall Drivers - Minor changes and bugfixes Where from download? http://www.karwos.hk/CycloneBoxInstaller.exe Best Regards & Stay Tuned, Cyclone Box Team Mensaje modificado por TELCEL el Jun 19 2011, 10:28 AM |
|
|
|
A continuacion 6 usuario(s) le Agradece(n) a TELCEL por su Colaboracion: arnoldo0945, davidquintero, losera1990, PAPASITOX, rulastone, Tonyman | |
|
Jun 19 2011, 12:04 PM
Publicado:
#84
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 72 Agradecimientos: 81 Registrado: 2-July 10 Desde: Usa Miembro No.: 114,552 Pais:
|
Instalador v1.15
18/06/2011 ===================== - Se ha añadido LECTURA DCT4 + / XGold1 código de seguridad cifradas de DCT4 + teléfono base (previamente considerados como codificado DCT4 +) -, por supuesto, sin pérdida de datos - parece primero en el mundo - Se ha añadido RESET (para 12345) Código de Seguridad DCT4 + / XGold1 cifrados de DCT4 + el teléfono -, por supuesto, sin pérdida de datos - parece primero en el mundo - Se ha añadido la lectura completa RPL (APN, CCC, HWC, SIMLOCK, SD ,...) de Dead / Degradado / seguridad incorrecto BB5 unidades - parece primero en el mundo. Si el teléfono no se enciende (Atrapado en el logo de Nokia, o muerto completamente), ahora se puede volcar archivos RPL completo con el fin de Borrado completo de su teléfono y revivirlo. Softwar antes de RPL dumping en el modo de recuperación, se pregunta al usuario de hacerlo. Por lo tanto, en todo caso de la reactivación de teléfono es degradado: 1. Crear RPL de los teléfonos muertos 2. Borrado completo 3. Escriba cualquier versión de software 4. Escribir archivo previamente una copia de seguridad RPL 5. Autorizar con SuperDongle 6. Escribir virgen PM - Añadido (fijo) Restablecimiento del contador NCK para los teléfonos basados en XGold2 - SecurityBlock es ahora una copia de seguridad antes de NCK Poner contadores a cero, por si acaso - XGold1 unidades Muerto el arranque fijo - Botón independiente para la recepción de L7 Código de LBF añadido - Corregido DCT4 contrarrestar los intentos de restablecer la seguridad para algunas variantes DCT4 - Ficha PMM Gestión añadido a la ficha de seguridad BB5 - Auto-Imei RESTAURAR añadió. Utilizar si tiene dañado el imei, pero con el archivo NPC válida. Buscará StoredFiles para el archivo de CRT a juego con la identificación CMT Pública y automaticlly escribirlo. - Se ha añadido la cámara CCD de hardware de alerta de fallos en la reparación de DCC - algunas unidades no es culpa de hardware y reparación no es posible (DCC archivo no encontrado) - XGold1 análisis PMM fijo (Durante la lectura de LBF, no la tabla Simlock encontrados para algunos operadores / teléfonos) - XGold2 problemas intermitentes fijos (de puntero no válido) - Módulo USB de transacciones reescrito - Botón de Borrado completo añadido para móviles BB5. No hay necesidad de conocer la cartografía FlashChip y el tamaño - es escaneada automaticlly. Se borrará CMT flash completamente. Asegúrese de RPL y PM son leidos antes de borrar! - Añadido "Sólo NPC" opción de utilizar con "Certificados Borrar". Se utiliza para eliminar certificado NPC sólo (IMEI corruptos y cambiar de teléfono-a hacer el trabajo necesario ... con el teléfono IMEI dañado se enciende incluso sin zona de seguridad válido). Usted puede utilizar esta función para volcar PM de que no trabajan teléfono. No se olvide de crear RPL DE TELÉFONO primero! Otra cosa que se dañan IMEI. - "Servidor de usar la fuerza", añadió para la Autorización de SX4. - Solución de error AutoSelecting - Corregido el problema con el análisis DCT4 variantes cuando no DCT4 productos instalados - Corregido el problema con el análisis BB5 variantes cuando no BB5 productos instalados - Índice de fuera obligado (0) fija - RPL normal está marcada ahora por defecto - Se ha eliminado "actualización Bootloader problema" de mensajes, como el causado mucha confusión - Problema de seguridad # 1 y # 2 Fijo (anti-idiota-fix) - Se ha añadido problema de seguridad adicional # 5 mensaje para reinstalar los controladores - Cambios menores y correcciones de errores |
|
|
|
|
Jun 21 2011, 07:51 AM
Publicado:
#85
|
|
 Maestro del Clan Grupo: Expulsados Mensajes: 793 Agradecimientos: 1365 Registrado: 6-July 09 Miembro No.: 46,360 Pais:
|
Cyclone Box Update Again, Standalone Blackberry MEP1,MEP2,MEP3,MEP4,MEP5 CALC ADDED
Hi, CITA - Blackberry Module is standalone now, no need server connection - MEP List combobox updated (237 meps), if not supported - type manually - Added MEP-1 (SIM Card) to Requested MEP gro***** - Added MEP-3 (Network Subset) to Requested MEP gro***** - Added MEP-5 (Corporate) to Requested MEP gro***** - Box firmware v01.63 is required - After activating new firmware, box have internal 50 phones limit counter for security reasons. Each calculation drops counter. After reaching 0, Blackberry and XGold (use same slot) service is simply deactivated. To make it working again - just upgrade your box by Box Maintenance again - no re-activation fees, at all. http://www.karwos.hk/Cyclone.exe 1. Make sure you've installed Installer v1.15 installed first 2. Upgrade your box firmware to v1.63 Best Regards & Stay Tuned, Cyclone Team Traducción Google... CITA MEP3, MEP4, MEP5 CALC AGREGADOS Hola, Cita: - Módulo de Blackberry es independiente ahora, no hay necesidad de conexión con el servidor - MEP lista desplegable de actualización (237 diputados), si no se admite - de tipo manual - Se ha añadido MEP-1 (Tarjeta SIM) a solicitado gro MEP ***** - Se ha añadido MEP-3 (subconjunto de red) a solicitado gro MEP ***** - Se ha añadido MEP-5 (Corporativo) a solicitado gro MEP ***** - Caja de firmware v01.63 es necesario - Después de activar el nuevo firmware, caja de 50 teléfonos internos tienen el límite del contador por razones de seguridad. Cada cálculo gotas contra. Después de llegar a 0, Blackberry y XGold (uso de la misma ranura) el servicio es simplemente desactivado. Para hacer que funcione de nuevo - un upgrade de su caja por caja de mantenimiento otra vez - sin cuotas de reactivación, en absoluto. ¿De dónde descargar? http://www.karwos.hk/Cyclone.exe 1. Asegúrese de que ha instalado instalador v1.15 instaló por primera vez 2. Actualizar el firmware v1.63 para caja Saludos cordiales y sintonizar, ciclón equipo Saludos. Enjoy. Para los que tengan problem con esto: 1).- Luego de descargar Reemplazar con el Nuevo Archivo en (por Defecto) C:\Archivos de programa\Cyclone Box 2).- Reemplazan, luego le dan Box Maintenance.. 3).- Enjoy de la Actualización. by DAPX Mensaje modificado por dapx el Jun 21 2011, 09:02 AM |
|
|
|
|
Jun 22 2011, 07:06 PM
Publicado:
#86
|
|
|
Maestro del Clan Grupo: Expulsados Mensajes: 915 Agradecimientos: 822 Registrado: 20-November 08 Desde: lima peru Miembro No.: 12,073 Pais:
|
Starting from today SUPERDCT4 Activation is activated FREE for every box! Enjoy!
 SuperDCT4 Free for EVERY Cyclone Box we've activated SuperDCT4 for EVERY Cyclone Box. No need to spend up initial credits Enjoy!! br Cyclone Box Team |
|
|
|
A continuacion 1 usuario(s) le Agradece(n) a TELCEL por su Colaboracion: arnoldo0945 | |
|
Jun 30 2011, 08:46 AM
Publicado:
#87
|
|
|
Maestro del Clan Grupo: Expulsados Mensajes: 793 Agradecimientos: 1365 Registrado: 6-July 09 Miembro No.: 46,360 Pais:
|
Cyclone Box Firmware v01.64 Released
Hi, new firmware for Cyclone Box was just uploaded at our server. What's new? - BB MEP-24660-003 added - BB MEP-34870-001 added - BB MEP-39371-001 added - BB MEP-40488-002 added - BB MEP-40954-001 added - BB MEP-41468-001 added - XGold1 ASC Flashing Booting issues solved - Minor changes and bugfixes This is server-side update only. Upgrade your box using "Box Maintenance". Best Regards & Stay Tuned, Cyclone Box Team Saludos. Enjoy 
Installe... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 21.96mb )
Número de descargas: 65Re Upload. Link Caido. Saludos |
|
|
|
A continuacion 3 usuario(s) le Agradece(n) a dapx por su Colaboracion: arnoldo0945, edoodjy, Tonyman | |
 Jul 19 2011, 10:30 AM
Publicado:
#88
|
|
 Sensei Supremo del Clan Grupo: Miembros Mensajes: 3,219 Agradecimientos: 10466 Registrado: 17-April 09 Desde: Innovation, Venezuela Miembro No.: 32,587 Pais: 
|
Cyclone Box Firmware v01.66 Released
Hi, this is server-side update only, upgrade your box using Box Maintenance. - MEP-31845-002 - added - MEP-41261-001 - added - MEP-42517-001 - added - MEP-08589-001 - fixed NCK length - Changed default SX4 Emulation Serial Number due to blacklist by Nokia in latest PA_SD. Now SX4 serial is calculated using box unique OTP Area, so quite randomfull and further blacklist not possible too. - Minor Changes and bugfixes Best regards N Stay Tuned, Cyclone Team |
|
|
|
|
Sep 11 2011, 11:51 AM
Publicado:
#89
|
|
 Gran Maestro del Clan Grupo: Miembros Mensajes: 1,530 Agradecimientos: 1749 Registrado: 1-March 09 Desde: Afghanistan Miembro No.: 24,720 Pais:
|
Hi, new firmware for Cyclone Box is ready.
Signature: Cyclone Nokia/Blackberry Application v01.71, (Sep 11 2011 17:49:29, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, © KarwosSoft 2011 What's new ? - MEP-04104-008 added - MEP-42490-002 added - Optimizations in TX2 data shifting - Fixed problems with resuming device from Static (sleep) mode on some configurations - Fixed some variants of JCOP31 handling - Minor changes and bugfixes This is server-side update only, just do Box Maintenance and your box will be updated. Keep note that new major installer is still not ready yet (many internal changes related to engine, etc), however it should be ready within next week, so be prepared suerte |
|
|
|
A continuacion 4 usuario(s) le Agradece(n) a alexis01 por su Colaboracion: arnoldo0945, cd-.-cell, davidquintero, rulastone | |
 Sep 21 2011, 03:07 PM
Publicado:
#90
|
|
 Maestro del Clan Grupo: Miembros Mensajes: 1,004 Agradecimientos: 1884 Registrado: 8-June 09 Desde: Paraguay Miembro No.: 41,270 Pais: 
|
=====================
Installer v1.16 Black Edition 21.09.2011 ===================== MAJOR FUNCTIONS ADDED - New BB5 FBUS/USB Loaders v11.24.00 Introduced - Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!), still "old method" avaiable in connection tab. - Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any attempt ) - Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode problem in this models..), or "Old USB Flashing Method" - "Use OLD USB FLASHING METHOD" moved to BB5/Flashing tab - "Settings" tab renamed to Connection - TX2 settings removed from BB5 Flashing Tab - RAPU Flashing/Booting Improved - C2-02 XGold2 Flashing "Added" - Cyclone has flashing compatibilty for this model, but MassMemory file couldn't be handled becasue too big. Fixed. - BB5 Mass Memory Flashing Tested - Cyclone SW has this posibility from long time ago... - Added "Read Unique Data" button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...) when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still FBUS operations fails. - Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally - Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11 - Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS - Added support for generating extended DCT4 RPL with Product Data for above models (CS problems) - Alcatel Calculator added to gui - PMM Protection Checkbox added upon PM write. Use to protect PM security fields. - Diagnostic Module Added - Selftests moved to new "Diagnostic" module - Vibra Tests Added - Backlight Tests Added - "Autodetect" added for DCT4 Unlocking. Unique method - non ASIC dependand (i.e. avoids RM-189 2310 problems avaiable on all boxes right now). If there is problems with autodetection - user still can select unlocking method manually. - Removed DCT4 ASK-RPL From Credits Manager - Removed SuperDCT4 Activation from Credits Manager - StatusBar messages are more accurate now - Added "Auto-Rebuild IMEI" checkbox for "Read UEM IMEI" function. Used to automatically generate FLASH IMEI DATA and programm it - one-click REPAIR ??????????????4. - CacheV2 Introduced - XGold1/2 Flashing Routines rewritten to be more memory effective - Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2 - USB Connection Type is now selected automatically when XGold2 platform found - The supported MEP List are now acquired from box once Blackberry Tool launch - Moved UEM stuff to new "ASK/RPL Tool" - XGold2 MassMemory flashing added - Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes Service, etc) - Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for Blackerry,XGold1,...) - XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining Calculation Limit is displayed - Relock files updated for DCT4 - AutoUpdater Introduced - USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC) - Database Unlock Introduced - RPL Write revised - PARTNERC certificate support added for Certificate Read - PARTNERC certificate support added for Certificate Write - PARTNERC certificate support addef for RPL Operations - Erase files support added - DCC configuration for NIMMIIIIRRFF06150000 added - DCC configuration for NIMMIIIIRRFF095A1F05 added - DCC configuration for NIMMIIIIRRFF095A1F04 added - DCC configuration for NI00IIIIRR0306150018 added - DCC configuration for NIMMIIIIRRFF095B1F05 added - DCC configuration for NIMMIIIIRRFF0102F201 added - DCC configuration for ISL2TI0200000103B840 added - DCC configuration for 8600030001040A021001 added - DCC configuration for 860003000104094B2F01 added - DCC configuration for 86000300010401035424 added - DCC configuration for NI00BC000003095B1F00 added - DCC configuration for NI00BC0000030102F203 added - DCC configuration for NI00BC0000030102F202 added - DCC configuration for NI00BC000003095B1F05 added - DCC configuration for NI00BC000003095B1F01 added - DCC configuration for NI00IIIIRR030C213402 added - DCC configuration for NI00IIIIRR030C213401 added - DCC configuration for NI00IIIIRR030C20C605 added - DCC configuration for NI00IIIIRR03094B2F01 added - DCC configuration for NI00IIIIRR0301022E05 added - DCC configuration for NI00IIIIRR0301022E01 added - DCC configuration for NIMMIIIIRRFF0C206C02 added - DCC configuration for NI00IIIIRR0301035602 added - DCC configuration for NI00CS0000040C213402 added - DCC configuration for NI00CS00000401022E05 added - DCC configuration for NI00BC0000040F03F802 added - DCC configuration for NI00BC0000040A4E2000 added - DCC configuration for NI00BC000004095B1F01 added - DCC configuration for NI00BC000004095B1F00 added - DCC configuration for NI00BC0000040103B904 added - DCC configuration for NI00BC0000040102F201 added - DCC configuration for NI00BC00000401022C00 added - DCC configuration for 0A4E2007 added - DCC configuration for 0103B904 added - SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638, RM-707, RM-712 - HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645 - Models.ini refreshed - Skin Stack Updated - Previous updates included - Nokia Connectivity Cable Drivers updated to v7.1.42.0 - Box Firmware v01.73 Released BUG FIXES & IMPROVEMENTS - Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore - Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file - Fixed problems with handling RAPIDO > v11.16.00 loaders over FBUS (FUR control Add Problem) - Check flashing Bus for WD2 fixed - Read UEM Imei for WD2 Fixed - Read ASK for WD2 Fixed - Write RPL for WD2 Fixed - Fixed lots of Access Violatios after closing up Nokia Tool - Fixed bug with disappearing Tray icon after Minimize to Tray - Bruteforce between NCK Fixed - PM Write bugs fixed (Access Violation) - Fixed bug with Broadcom Read Info - Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab - Fixed product mismatch on XG1/XG2 autodetection - Fixed invalid Calculation of Mastercode - 6230 Flashing Fixed (Given Image not maches with readen UPP Id or Image problem). If problem still exists - select all flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M - autoselection is HWID based and may fails anytime). - OMAP Loaders Fixed - Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0 DESCARGA1 DESCARGA2 DESCARGA3 -------------------- ------------------------------------------------------------------------------------
la mano de obra no se cobra por cambiar una pieza, sino por saber que pieza cambiar  ------------------------------------------------------------------------------------ |
|
|
|
A continuacion 12 usuario(s) le Agradece(n) a miguelcpm22 por su Colaboracion: alvera, Aquiroga12, arnoldo0945, cellmax3, dapx, franklin505, jose8757, martinnv6, rey00, rosa808, rulastone, vitto0812 | |
|
Sep 24 2011, 02:17 PM
Publicado:
#91
|
|
|
Maestro del Clan Grupo: Expulsados Mensajes: 793 Agradecimientos: 1365 Registrado: 6-July 09 Miembro No.: 46,360 Pais:
|
CycloneBox BlackBerry Module Update(25-09-2011)
Hi, new update for Cyclone Box BlackBerry Module is ready. Added support for following MEPs: MEP-06041-012 MEP-06041-013 MEP-14074-004 MEP-29080-003 MEP-34870-002 NOTE Just update your box using Box Maintenance. Each box having 3 update credits. Still alot more to come so stay tune Best Regards, Cyclone Team Saludos. Enjoy |
|
|
|
A continuacion 3 usuario(s) le Agradece(n) a dapx por su Colaboracion: 3zr3vnoc, arnoldo0945, miguelcpm22 | |
|
Sep 29 2011, 09:51 AM
Publicado:
#92
|
|
|
Sensei Supremo del Clan Grupo: Miembros Mensajes: 3,219 Agradecimientos: 10466 Registrado: 17-April 09 Desde: Innovation, Venezuela Miembro No.: 32,587 Pais:
|
Cyclone Box Firmware v01.75 Released
Hi, new firmware for Cyclone Box is just uploaded at server. What's new? - MEP-10129-006 added - MEP-04626-001 fixed length - MEP-06529-001 fixed length - MEP-06529-002 fixed length - MEP-06530-001 fixed length - MEP-06530-002 fixed length - MEP-07321-002 fixed length - MEP-07723-001 fixed length - MEP-08881-001 fixed length - MEP-08882-001 fixed length - MEP-09292-001 fixed length - MEP-10073-001 fixed length - MEP-18601-001 fixed length - MEP-19877-001 fixed length - MEP-24660-001 fixed length - MEP-30218-001 fixed length Update your box using box maintenance. Best Regards, Cyclone Box team |
|
|
|
|
Oct 1 2011, 12:01 PM
Publicado:
#93
|
|
|
Maestro del Clan Grupo: Miembros Mensajes: 1,004 Agradecimientos: 1884 Registrado: 8-June 09 Desde: Paraguay Miembro No.: 41,270 Pais:
|
Hi, new firmware for Cyclone Box is just uploaded at server.
Added support for Blackberry MEP-29318-002. Best Regards, Cyclone Team -------------------- ------------------------------------------------------------------------------------
la mano de obra no se cobra por cambiar una pieza, sino por saber que pieza cambiar ------------------------------------------------------------------------------------ |
|
|
|
A continuacion 3 usuario(s) le Agradece(n) a miguelcpm22 por su Colaboracion: arnoldo0945, dapx, rulastone | |
|
Oct 3 2011, 08:59 PM
Publicado:
#94
|
|
|
Sensei Supremo del Clan Grupo: Miembros Mensajes: 3,219 Agradecimientos: 10466 Registrado: 17-April 09 Desde: Innovation, Venezuela Miembro No.: 32,587 Pais:
|
Cyclone BOMB!!! RAPUv21 Unlock/SD Repair/RPL Back/Downgrade/SecAnalys/Standalone SX4!
Hi, latest bomb for Cyclone Box is ready Update is 100% free and standalone for CycloneBox users;-) - Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry. - Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones - Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones - Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones - Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones - Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones - Supported interfaces: USB and FBUS - Small bug fixes, i.e. PM protection is now unticked by default Nokia 701, reading sl3 log file CÓDIGO [Nokia USB Phonet]: Port opened OK! Reading SL3 LOG File... [Nokia USB Phonet]: Port opened OK! MCU Version V 79u_11w31.4 MCU Date 16-08-11 Product RM-774 (Nokia 701) Manufacturer (c) Nokia IMEI 358272040230347 Mastercode 752474040 Analyzing Profile Bits... Phone can be NCK unlocked using KEYPAD Phone can be NCK unlocked using FBUS 15 Digits NCK Found WARNING: "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108 CMT_EM_ASIC_ID: 00001040 CMT_EM_ASIC_ID: 00001030 CMT_PUBLIC_ID: EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706 CMT_BOOT_ROM_CRC: 2CAC45E2 CMT_SECURE_ROM_CRC: 3BC33C8B CMT Ready! RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs Custom loader running OK! Working... If phone doesn't powering into Local Mode now for some reason do following: 1. Re-insert battery 2. Power it on, when asked use Ovi/Pc Suite Mode Readed OK, Saving to "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Nk701 detailed security analysis CÓDIGO Started Phone Security Analysis... [Nokia USB Phonet]: Port opened OK! MCU Version V 79u_11w31.4 MCU Date 16-08-11 Product RM-774 (Nokia 701) Manufacturer (c) Nokia IMEI 358272040230347 Mastercode 752474040 Reading Security Block... Security block OK and saved to "RM-774_358272040230347_2011-10-04_022815.SecurityBlock.PM" Step 1 : Testing SIMLOCK SIMLOCK SEFLTEST PASSED OK! Step 2 : Testing SECURITY SECURITY SEFLTEST PASSED OK! Step 3 : Analyzing Security Block "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good... Checking SUPERDONGLE... SUPERDONGLE FOUND AND CHECKSUM OK! PASSED! Checking SIMLOCK... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking MCU&DSP TIMESTAMPS... MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED! Checking CMLA KEYS... CMLA KEYS FOUND AND CHECKSUM OK! PASSED! Checking ECC KEYS... ECC KEYS FOUND AND CHECKSUM OK! PASSED! Checking DIV KEYS... DIV KEYS FOUND AND CHECKSUM OK! PASSED! Analyze finished! Nk 701, full RPL CÓDIGO RPL Creation started... Processing CMT Part... [Nokia USB Phonet]: Port opened OK! Storing Product Code... Storing PSN... Storing HWID... Trying to store Simlock... Reading Configuration Key... Hashing... Reading SHA1-RSA Signature... Reading SHA1-HMAC Signature... Storing Simlock... Trying to store WMDRM RPL... Reading Keys... Storing WMDRM PD... Reading Security Block... Security block OK and saved to "RM-774_358272040230347_2011-10-04_022831.SecurityBlock.PM" "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good... Storing Additional Data... Checking Superdongle Key... Encrypting Superdongle Key... Storing Superdongle Key... Checking CMLA Key... Storing CMLA Key... Booting CMT... [Nokia USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! Old ROM Detected CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108 CMT_EM_ASIC_ID: 00001040 CMT_EM_ASIC_ID: 00001030 CMT_PUBLIC_ID: EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706 CMT_BOOT_ROM_CRC: 2CAC45E2 CMT_SECURE_ROM_CRC: 3BC33C8B CMT Ready! Searching for BootCode: DualLine 32Bit RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.24.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Waiting for USB Boot ROM Answer... ROM Ret: 0xFFFD125D ROM CMT dwAddr: 0x10004FF0 ROM CMT dwLength: 0x00627837 Seems ROM Initialized OK! Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND Requested Algorithm: XSR 1.6 (CMT) Searching for BootCode: DualLine 32Bit FlashChip 0x00EC0060 (Samsung), Size: 1024MBytes, VPP: Not Supported RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.24.0, Algo: XSR 1.6 Initializing TurboCache... TurboCache Loaded! Writing CMT PASUBTOC Certificate... Writing CMT ALG Certificate... CMT Algorithm Ready! Transmission Mode Requested: Bulk USB, Accepted: Bulk USB Box TX2 Data Pin set to: Service Pin 3 Waiting for FUR Client become avaiable... [Nokia USB Flashing Generic]: Port opened OK! FUR Avaiable! Adding FUR Client (CMT, State: Ready)... CMT FUR Ready! Overriding VPP Setting, USB can't use VPP Box VPP disabled Internal CMT Phone VPP Enabled PAPUBKEYS Hash for CMT: FEB3BB7481D3E5D0EAC907335A4402A071493D53 APE Subsystem Not Found Storing NPC... Storing CCC... Storing HWC... CMT VARIANT Not Found Storing PARTNERC... Restarting MCU... RPL Saved OK Standalone SX4 operation CÓDIGO SX4 Authorization / SD Repair Procedure Started.... [Nokia USB Phonet]: Port opened OK! "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C0004AAC " Exists, That is good... [Nokia USB Phonet]: Port opened OK! MCU Version V 79u_11w31.4 MCU Date 16-08-11 Product RM-774 (Nokia 701) Manufacturer (c) Nokia IMEI 358272040230347 Mastercode 752474040 Reading Security Block... Security block OK and saved to "RM-774_358272040230347_2011-10-04_022851.SecurityBlock.PM" SX4 Status: Not authorized (74) Started mutual authenthication with card... Receiving Phone Seed 1... Phone Seed 1 Received Sending calculated Data 1, and expecting Seed 2... Calculated Data 1 accepted, Phone Seed 2 Received Sending calculated Data 2 Calculated Data 2 sent, Checking Authorization Status again Authorization successfully finished! Looking for Virgin PM In Database... Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button Copying our loaders will affect in cracks/clones in market shortly and maybe Broadcom Unlocking business destroy. At least firmware 1.74 needed (update isn't needed at all). Don't forget to have installed latest v1.16 installer (http://www.karwos.hk/CycloneBoxInstaller.exe), so Autoupdate module will do the job. Best Regards, Cyclone Team |
|
|
|
A continuacion 7 usuario(s) le Agradece(n) a SpLock por su Colaboracion: 3zr3vnoc, arnoldo0945, dapx, jorcomax11, miguelcpm22, sargee, Tonyman | |
|
Oct 9 2011, 11:48 AM
Publicado:
#95
|
|
|
Sensei Supremo del Clan Grupo: Miembros Mensajes: 3,219 Agradecimientos: 10466 Registrado: 17-April 09 Desde: Innovation, Venezuela Miembro No.: 32,587 Pais:
|
CycloneBox SL3direct and new MEP-17568-003 Firmware v01.77 Released
Hi, firmware v01.77 was just loaded to server. Added new Blackberry MEP-175683-003 (MTS Moscow, North-West GSM, KB Impuls BeeLine) and Added free SuperBB5 (sl3direct) routines. STAY TUNED. |
|
|
|
|
Oct 14 2011, 06:45 AM
Publicado:
#96
|
|
|
Maestro del Clan Grupo: Miembros Mensajes: 1,004 Agradecimientos: 1884 Registrado: 8-June 09 Desde: Paraguay Miembro No.: 41,270 Pais:
|
SL3 Direct (No Bruteforce) for CycloneBox - Offical Information here.
Features: - Unlock all SP Locks on SL3 and SIMLOC30 Nokia Mobiles - Supported CPUs: RAP3G, RAPIDO, RAPU1, RAPU2, and maybe Broadcom (loaders under testing) - Unlocks 20 digits phones - Works on FBUS interface (USB possible but for security reasons will be disabled) - Works on all hash - Works standalone and now best, FREE FOR EVERY ACTIVATED BOX BEFORE 1ST DECEMBER 2011, after that date will need small activation fee - Release date 1st December 2011 informacion adicional la activacion sera free para las cajas que fueron compradas y activadas antes del 1 de diciembre del 2011 las cajas compradas a partir de esa fecha deberan pagar 150 creditos para la activacion del servicio sl3direct  Enjoy CycloneBox :-) Welcome to MXKey funreal no agan spam por favor bien claro dice que sera lanzado el 1 de Diciembre -------------------- ------------------------------------------------------------------------------------
la mano de obra no se cobra por cambiar una pieza, sino por saber que pieza cambiar ------------------------------------------------------------------------------------ |
|
|
|
A continuacion 17 usuario(s) le Agradece(n) a miguelcpm22 por su Colaboracion: arnoldo0945, barolb, carfer777, crazy31, dapx, DelReal, edilfull, elasiatico, Elyoyi, FRANCISCO_MARCEL_, frontlinecel, martinnv6, rosa808, sargee, soportegsm, Taller-rapicell, Tonyman | |
|
Oct 20 2011, 12:28 PM
Publicado:
#97
|
|
|
Maestro del Clan Grupo: Miembros Mensajes: 1,004 Agradecimientos: 1884 Registrado: 8-June 09 Desde: Paraguay Miembro No.: 41,270 Pais:
|
Hi, new update is released.
- Added PA_SIMLOC30 Original Nokia RPL Write support in SIMLOCK2 format - The NCK length is now automatically recognized upon RPL write, so correct NCK array lenght might be assumed - Minor changes and bugfixes Autoupdate should do the job, in case of any problems (or interrupted update) you can manually download exe from http://www.karwos.hk/updater/Cyclone.exe and place in C:\Program Files\Cyclone Box\ Best Regards, Cyclone Team -------------------- ------------------------------------------------------------------------------------
la mano de obra no se cobra por cambiar una pieza, sino por saber que pieza cambiar ------------------------------------------------------------------------------------ |
|
|
|
A continuacion 8 usuario(s) le Agradece(n) a miguelcpm22 por su Colaboracion: arnoldo0945, dapx, elasiatico, franklin505, jorcomax11, rosa808, sargee, Tonyman | |
|
Oct 24 2011, 03:11 PM
Publicado:
#98
|
|
 Gran Maestro del Clan Grupo: Miembros Mensajes: 1,424 Agradecimientos: 5644 Registrado: 27-March 09 Desde: ...::Honduras::... Miembro No.: 29,281 Pais: 
|
Hi, new firmware v01.78 was just loaded at server.
What's new? - Added support for Blackberry MEP-06041-016, WORLD'S FIRST - Added support for Blackberry MEP-42490-001, WORLD'S FIRST Upgrade your box using Box Maintenance and Enjoy ;-) More to come, Best Regards, Cyclone Box Team -------------------- |
|
|
|
A continuacion 5 usuario(s) le Agradece(n) a jorcomax11 por su Colaboracion: arnoldo0945, dapx, miguelcpm22, moices, Tonyman | |
|
Nov 6 2011, 05:52 PM
Publicado:
#99
|
|
 Maestro del Clan Grupo: Expulsados Mensajes: 1,042 Agradecimientos: 879 Registrado: 20-January 09 Desde: Argentina Miembro No.: 18,666 Pais:
|
Nuevo FW disponible, Nuevo MEP agregado.
CITA(SiRoYa;7866178) CycloneBox Firmware 01.79 Firmware is Ready on server Added Latest BlackBerry Security Mep -MEP-06041-017 (Worlds First) Update your Box from Maintenance tool PS We know that you guys are waiting for something ,So we will be back again in few hours Stay Tune br Cyclone Box team Saludos Mensaje modificado por arnoldo0945 el Nov 6 2011, 07:00 PM |
|
|
|
|
Nov 11 2011, 07:54 AM
Publicado:
#100
|
|
|
Maestro del Clan Grupo: Expulsados Mensajes: 793 Agradecimientos: 1365 Registrado: 6-July 09 Miembro No.: 46,360 Pais:
|
Cyclonebox added supports for bruteforce unlock for nokia broadcom phones
 Saludos. Enjoy. PD: ADD Enlaces apenas salgan |
|
|
|
A continuacion 3 usuario(s) le Agradece(n) a dapx por su Colaboracion: cellcentersps, edilfull, TRUENOFLASH | |
|
|
|
Fecha y Hora actual: 19th April 2026 - 02:12 AM |
