Actualizaciones ATF Advance Turbo Flasher Cualquier Cometario Diferente A La Actualizacion Sera Borrado , Solo Actualizaciones Opciones

[JULIAN35]

ATF v8.92 Auto-Update 29 JUN 2012!!!
A New EXE Update v8.92 has been uploaded to the ATF Server.

[Anunciante Autorizado]

[miguelpaolo]

A New EXE Update v8.92 has been uploaded to the ATF Server.

To Get this Update, please follow the Steps Below:


1. Make Sure "Automatically Check for Updates" is Checked...




2. Restart ATF Exe, and you will get POP-UP Message Like this:

*** Click YES ***



3. You can check the Download Status on ANY of the tabs in "Product Support"



4. After Software restarts, you now have the NEW VERSION but you might need to "UPDATE IMPORTANT FILES" if necessary.




5. "UPDATE IMPORTANT FILES" if necessary.




6. After ALL Necessary Files are updated, Restart ATF EXE and Enjoy the New Update!



Flashing Updates:

--> New Nokia Flash Loaders 12.14.001.4

Bug Fixes:

--> Fixed "ULTRA SLOW" Flashing of S40 PPM and CNT Files
--> Adjusted FUR New Protocol Booting

[JULIAN35]

ATF Update v8.95 - Nokia N9 SP Unlock support
A New EXE Update v8.95 has been uploaded to the ATF Server.

N9-00 SPECIAL Update !!!

http://174.120.45.27/tmp/n9_daddy.jpg



Special Features (Requires ATF Network Authorization):
--> N9-00 RM-696 SL3 Unlock via Brute Force (Decrypt PM 120)
--> N9-00 RM-696 Super Dongle Repair
--> N9-00 RM-696 SX-4 Authorization for entire PM Area (Except PM 308)
--> ALL N9-00 Special Features ONLY NEED USB CABLE Connection

Flashing Updates:
--> NONE

Bug Fixes:
--> Fixed Authorize Phone via FBUS ERROR



User Notes:
1. If you want to do any PM WRITE functions to N9 Phones, you must
first unlock the entire PM Area via SX-4 Authorization because the
ENTIRE PM AREA is Protected by SX-4.

Example, if you want to reset FBUS/KEYPAD Lock Counters, you need
to SX-4 Authorize the Phone first.


2. I will repeat this again, because it seems some people claim that
they can read Security Code from N9-00 very easily....

The SECURITY CODE read by SCAN PHONE is NOT THE Phone Lock
Code. The Phone lock code is running on the OMAP APE Side and the
SECURITY CODE is for the CMT side, which is practically useless.


3. This is very very IMPORTANT! All N9-00 phones will NOT ACCEPT
NCK Codes via KEYPAD Entry because you will NOT GET "w" if you
want to type #pw+123456789012345+7#...

So it would be EASIER for you to just enter the NCK Codes via USB
Cable.

Or you can also try to ENTER the NCK Code via the Phone Menu:
SETTINGS - DEVICE - SIM CARD - ENTER UNLOCK CODE

Personally, I did not try this method, and it requires that there should
be a SIM Card inserted to the phone...


( 4. ATF is the ONLY tool which supports Nokia N9 SP Unlock
( No Regards to COPY-PASTERS )

[miguelpaolo]

ATF SL3 Simlock Recovery v9.0 Update!! Discussion Thread:
[b]

Introducing The ATF Simlock Recovery Module v1.0[/b]


Introduction:


In the past, when a dead Nokia BB5 SL3 Phone comes to your shop, it was only
possible for you to backup the IMEI via a Backup RPL Function. There was no
way for you to backup a possibly 100% working SIMLOCK inside the phone because
you needed Local/Test Mode in order to get the PM Backups. Dead Phones cannot
give you Local/Test Mode at all, so you cannot backup the Simlocks even if you
wanted to.
Now here comes the Solution... The ATF Simlock Recovery Module v1.0 will allow
you to BACKUP SIMLOCKS from a DEAD PHONE! Just a 1-click solution for Recovery
Level 1 and Level 2 for NON-CORRUPTED SIMLOCKS on a DEAD PHONE.
Even if your phone SIMLOCKS are CORRUPTED, The ATF Network can still attempt to
perform a Level 3 Recovery from it, but it will cost you some ATF SL3 Credits.

Here is a Short Description about the three Simlock Recovery Levels:

Recovery Level 1:

* FREE for ALL ATF BOX Users (DOES NOT NEED CREDITS or ATF NETWORK ACTIVATION)
* Phone DOES NOT need to be AUthorized
* 100% Stand Alone
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from DUMP FILE or from Connected PHONE
* Super Fast Recovery, BUT SIMLOCKS WILL NOT BE VERIFIED
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 70% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP

Recovery Level 2:

* FREE for ALL ATF Network Users (DOES NOT NEED CREDITS)
* Phone NEEDS to be Authorized via The ATF Network
* Stand Alone ONLY AFTER PHONE IS AUTHORIZED via The ATF Network
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY + RECOVER ORIGINAL SIMLOCKS if SIMLOCKS are OVERWRITTEN)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from Connected PHONE ONLY
* Recovery Time will depend on Fragmentation Level of the XSR Blocks
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 95% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP

Recovery Level 3:

* Needs SL3 Credits and only available for ATF Network Activated Users
* Phone NEEDS to be Authorized via The ATF Network
* Recovery is performed by our Servers (NOT STAND ALONE)
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 NOR Blocks for RAP3Gv3
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recovery Time will depend on CURRENT TASK LOAD on the ATF Simlock Recovery Server
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* POSSIBLE TO SUPPORT OVERWRITTEN PM 120 Blocks with Wrong PM 120 Blocks
* POSSIBLE TO SUPPORT FULLY ERASED PHONES
* DOES NOT SUPPORT WRONG FLASHED PHONES with WRONG FIRMWARE (Repartitioned NANDs)
* SUCCESS RATE = 95% if the Phone is not wrongly Repartitioned by a wrong Firmware

IMPORTANT INFORMATION:


1. Level 1 Recovered Simlocks are NOT VERFIED to be Working (NOT GUARANTEED)
2. Level 2 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK
3. Level 3 Recovered Simlocks are 100% VERIFIED and Guaranteed to WORK

Summary:

If your phone is DEAD, but the SIMLOCKS are 100% OK, then the ATF Simlock
Recovery Module will recover your simlocks for you via Recovery Level 1 or 2.
If your phone is DEAD, and the SIMLOCKS are possibly corrupted, then the
ATF Simlock Recovery Module will recover your simlocks for you via Recovery
Level 3 + ATF SL3 Credits.

Box Firmware Update:

New ATF Firmware LogiCore 10.3.15 for ATF Chrome, ATF Lightning and ATF Nitro Boxes

Other Updates:
* MEEGO PHONE Authorization EVEN IF 20-digit SL3 Code is detected.
* Shows full RPL (Certificates) Information during Backup RPL on BB5 Phones.
--> Checks Original IMEI
--> Checks Original Product Code
--> Checks PA_PUBLIC_ID
--> Checks PA_PUBLIC_KEYS_HASH
--> Checks Original BT ID
--> Checks Original WLAN ID

* New option in Settings "Select USB Connection by Default when ATF Software Starts"
* Cross Flashing is now IMPOSSIBLE if Phone has good IMEI (NO MORE WRONG FIRMWARES)
* Flash File CRC32 is now CHECKED BY DEFAULT on Flash Files downloaded from NaviFirm etc...
* Other small tweaks which I already forgot to mention...

[3zr3vnoc]

ATF Lumia TP Unlock 9.10 Update!! 14 Sep 2012!!

ATF Lumia TP Unlock 9.10 Update!! 14 Sep 2012!!
Firmware Version Required : 10.3.30


Introducing The ATF Lumia Test Point Module v1.0

* Repair DEAD BOOT Lumia 800 Phones killed by Windows "Format Disk"
* Repair DEAD BOOT Lumia 710 Phones killed by Windows "Format Disk"
* Repair DEAD BOOT Lumias Killed by other methods
* Direct Write of SEC_BOOT, OSBL, QBOOT and AMSS Images
* Direct Write of QUALCOMM Unlocked OSBL to Lumia 800
* SP Unlock ANY Lumia 710 and 800 version and OSBL Type (QCOM or DLOAD)
* Cross-Flash 800C and 610C into 800 and 610 Variants to accept non RUIM Cards
* Supports Lumia 610, 610C, 710, 800, 800C and 900 (First Generation Lumias)


Introducing The ATF iOS Service Request Module

* Only Available to ATF Network Users
* Uses ATF iCredits
* Can Request and Retrieve iDevice IMEI Network Information with 1 CLICK
* Can Request Network SIM Unlock for Specific Networks
* Can Request IMEI Un-Barring Request for Specific Networks


Introducing The New LogiCore 10.3.30 Firmware for ATF Chrome, ATF Lightning and Nitro Boxes

* Added Support for Lumia Test Point Connections



IMPORTANT INFORMATION:

For SIMLOCK Recovery Level 3, This New Update 9.10 will NOT be able to
use your old SL3 BF Credits for SRP File Uploading. It will be using
the New Simlock Recovery Credits (SRP Credits).

If you want to continue using your SL3 BF Credits to upload SRP Files,
then you are given 2 weeks to use it with the older ATF exe (9.02 and
lower). Starting October 2012, we will NO LONGER accept SRP File Uploads
using SL3 BF Credits.



User Requested Change Log:

*Show Variant Certificate Information during RPL Backup
#Angel

*Skip Flash File Checksum Verification in Expert Settings added
#Angel

*Fixed Generation Tab Switching (Infineon to DCT4)
#Pasha T.



[b]Who will buy this if you can get more in ATF?[/b]



DOWNLOAD HERE:
Offical Hotfile Mirror
Offical Mirrorcreator Mirror

The Master Piece



Mensaje modificado por 3zr3vnoc el Sep 14 2012, 11:11 AM

[3zr3vnoc]

Atf 9.12 auto-update 9-25-2012
*******************************
Advance Turbo Flasher v9.12
*******************************

Release Date: September 25, 2012


* Added Suport for TP unlocking of Lumia 800 with TOSHIBA Flash Chip
* Improved support for "stock" firmware unlock for Lumia 710 and Lumia 800 TP Unlock


*** WARNING ***
TOSHIBA Flash Chip Unlock will take 10-20 minutes (a lot longer than non-Toshiba Flash Chip)

The Update is Available via "Automatically Check for Updates" Option in

Settings ---> General Settings of The ATF Software.

 ATF.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 184.47k ) Número de descargas: 0


Descarga Directa CLANGSM:  AdvanceB... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 4.59mb ) Número de descargas: 42

[JULIAN35]

ATF v9.15 Update!! 25 OCT 2012!!
*******************************
Advance Turbo Flasher v9.15
*******************************

Release Date: October 25, 2012


*** This is a EXE Only Update via the AUTOUPDATE FUNCTION of the ATF Software ***


Full Flashing Support for XG223 Based Phones

* Asha 308 / 3080 RM-838
* Asha 309 / 3090 RM-843
* Asha 308 RM-852


Backup RPL, Read/Write PM/PP etc... All NON SIMLOCK FBUS Functions are Functional for XG223.


XG223 (XGOLD 223) is the new Infineon/Intel CPU that Nokia will be using for their Low-Mid Range Phones.





This is an Interim Update... Expect a Full Installer to follow after.
Contact your favorite ATF Product Supporters if you want some feasible
functionalities to be added on the Next Release.

[jorcomax11]

ATF Official Windows 8/7/XP 32-bit/64-bit Signed USB Drivers
ATF Officially Supports Windows 8

Download the NEW Signed USB Drivers Here:

Download

or you can just click "UPDATE IMPORTANT FILES" in the ATF Software
to get the new Signed Drivers here:

[b]C:\AdvanceBox Turbo Flasher\Driver\ATF_NEW_DRIVERS\


Windows Operating System Support List:

Windows 8
Windows 8 x64
Windows Server 2008 R2
Windows 7
Windows 7 x64
Windows Server 2008
Windows Server 2008 x64
Windows Vista
Windows Vista x64
Windows Server 2003
Windows Server 2003 x64
Windows XP
Windows XP x64
Windows ME
Windows 98


Windows 8 Pro 64-Bit - Clean Installation Test Here:
ATF Official Windows 8/7/XP 32-bit/64-bit Signed USB Drivers


We urge ALL ATF Users to Update your Box Drivers Now!

Trust ATF[/b]

[JULIAN35]

ATF Lumia WinPhone 8 Support - v9.20 Update!! 26 DEC 2012!!
[MAJOR UPDATE]

Introduing The Lumia Windows Phone 8 Module v1.0

Current Windows 8 Phones:
Lumia 920 - RM-820, RM-821
Lumia 810 - RM-878
Lumia 820 - RM-824, RM-825
Lumia 822 - RM-845

Full Product Firmware Flashing via USB Connection with valid FFU Signed Images
Supports Live Phone, DEAD Phone and RED Phone* Flashing
Full Product Info Reading including Lock Status and Original Provisioner Settings
Variant Information displayed during Live Phone Scan
Phone Type will now be Automatically Selected after Live Phone Scan
Ability to Switch from NCSD Mode to Test Mode aka FBUS MODE
--> In FBUS MODE, Self-Tests and Some Scan Phone Items are available.

TIPS for Working with Windows 8 Phones:
1. Holding the POWER BUTTON for 12 Seconds will force a phone reboot to Normal Mode
2. Holding the POWER BUTTON and VOLUME DOWN BUTTON until a short vibration will force phone into FLASH MODE
3. Always make sure you have more than 50% Battery Power before you flash the Phone.
4. After the phone is flashed, ALL USER DATA is ERASED! Make sure to Backup Phone Data before flashing.


[Windows Phone 7.x]
Variant Information now displayed during Live Phone Scan
-->This is useful for knowing Original Provisioner of the Phone aka NETWORK LOCK
Phone Type will now be Automatically Selected after Live Phone Scan
--> Correct Flash Files will also be selected if available


[Infineon XG213]
Decrypt PM 120 Hashes for LBF of XG213 Based Infineon Phones
Show Infineon XG213 Keypress and FBUS Counters
Reset Lock Counters for XG213
XG213 Send 15-digit or 20-digit Code via FBUS Frame
LBF Files SKIP SAVE if 20-digit or Phone does not accept NCK Input
Automatically Backup XG213 Certificates in Plain RPL Format during Prior to Flashing
XG213 Write RPL Certificates
Show Second IMEI Info for Dual Sim Phones (Scan Phone and Backup RPL)
Fixed "Quick/Shortcut Erase" Bug when flashing "Contact Service" Phones


[Infineon XG223]
Fixed XG223 RPL Certificate Backup Sizes (Asha 308, 3080, 309 and 3090)
Enabled XG223 Write RPL and Custom Fash Chip Erase Address
Show Second IMEI Info for Dual Sim Phones (Scan Phone and Backup RPL)


[General Updates]
New ATF Box Signed Drivers for 32/64 Bit Windows XP, 7 and 8
New BB5 Flash Loaders 12.33.000.3
New WinUSB Lumia Drivers (Supports Windows 8)
New Nokia Connectivity Cable Driver 7.1.92.0 (Supports All Current Nokia Phones)


[User Requests]
Angel - Product Type (RM-XXX) now saved in PM and PP Backup Filenames

RED Phone - Phone is showing a dark RED Tint with NOKIA Logo Only

[miguelcpm22]

[9.21 AUTO UPDATE - November 30, 2012]

1. Bug Fixed on Scanning Simlock NON-LOCKED or DEVKIT WinPhone 8 Devices
2. Better RAM Allocation for Loading 1GB FFU Flash Files for WinPhone8

Get it Fresh from the AutoUpdate Server!




[9.20 MAJOR UPDATE]

Introduing The Lumia Windows Phone 8 Module v1.0

Current Windows 8 Phones:
Lumia 920 - RM-820, RM-821
Lumia 810 - RM-878
Lumia 820 - RM-824, RM-825
Lumia 822 - RM-845

Full Product Firmware Flashing via USB Connection with valid FFU Signed Images
Supports Live Phone, DEAD Phone and RED Phone* Flashing
Full Product Info Reading including Lock Status and Original Provisioner Settings
Variant Information displayed during Live Phone Scan
Phone Type will now be Automatically Selected after Live Phone Scan
Ability to Switch from NCSD Mode to Test Mode aka FBUS MODE
--> In FBUS MODE, Self-Tests and Some Scan Phone Items are available.

TIPS for Working with Windows 8 Phones:
1. Holding the POWER BUTTON for 12 Seconds will force a phone reboot to Normal Mode
2. Holding the POWER BUTTON and VOLUME DOWN BUTTON until a short vibration will force phone into FLASH MODE
3. Always make sure you have more than 50% Battery Power before you flash the Phone.
4. After the phone is flashed, ALL USER DATA is ERASED! Make sure to Backup Phone Data before flashing.


[Windows Phone 7.x]
Variant Information now displayed during Live Phone Scan
-->This is useful for knowing Original Provisioner of the Phone aka NETWORK LOCK
Phone Type will now be Automatically Selected after Live Phone Scan
--> Correct Flash Files will also be selected if available


[Infineon XG213]
Decrypt PM 120 Hashes for LBF of XG213 Based Infineon Phones
Show Infineon XG213 Keypress and FBUS Counters
Reset Lock Counters for XG213
XG213 Send 15-digit or 20-digit Code via FBUS Frame
LBF Files SKIP SAVE if 20-digit or Phone does not accept NCK Input
Automatically Backup XG213 Certificates in Plain RPL Format during Prior to Flashing
XG213 Write RPL Certificates
Show Second IMEI Info for Dual Sim Phones (Scan Phone and Backup RPL)
Fixed "Quick/Shortcut Erase" Bug when flashing "Contact Service" Phones


[Infineon XG223]
Fixed XG223 RPL Certificate Backup Sizes (Asha 308, 3080, 309 and 3090)
Enabled XG223 Write RPL and Custom Fash Chip Erase Address
Show Second IMEI Info for Dual Sim Phones (Scan Phone and Backup RPL)


[General Updates]
New ATF Box Signed Drivers for 32/64 Bit Windows XP, 7 and 8
New BB5 Flash Loaders 12.33.000.3
New WinUSB Lumia Drivers (Supports Windows 8)
New Nokia Connectivity Cable Driver 7.1.92.0 (Supports All Current Nokia Phones)


[User Requests]
Angel - Product Type (RM-XXX) now saved in PM and PP Backup Filenames

RED Phone - Phone is showing a dark RED Tint with NOKIA Logo Only

[xlovecrafx]

[9.22 de actualización automática - 1 de diciembre de 2012]

1. Añadido NV artículo completo de lectura y escritura para WinPhone 8 Dispositivos
2. Fija INVALID VID / PID pares al escanear los dispositivos más antiguos 7.x WinPhone

Consíguela fresco desde el servidor de actualización automática!

discusión pública y Pruebas Aquí: ATF Lumia WinPhone 8 Apoyo - v9.22 Update!! Tema Debate público:

[miguelpaolo]

ATF Lumia 7.x Direct Unlock v9.30 Update!! 10 Dec 2012!

Advance Turbo Flasher v9.30

Release Date: December 10, 2012

Firmware Version Required : 10.3.30


[MAJOR UPDATE]

Introducing The Lumia Windows Phone 7.x eMMC Direct Module

Main Qualcomm OSBL Functions:

- Direct Unlock Lumia 710 via USB Cable (Qualcomm OSBL Only, DLOAD OSBL NOT SUPPORTED)

- Direct Unlock Lumia 800 via USB Cable (Qualcomm OSBL Only, DLOAD OSBL NOT SUPPORTED)

Other Qualcomm OSBL Functions:

- Direct Write OSBL original ESCO File Format via Qualcomm OSBL

- Direct Write Windows 7.x OS (boot.img) ESCO File Format via Qualcomm OSBL

- Direct Read/Write all Partitions in the Master Boot Record

- Backup/Restore PMM, Simlocks, Certificates and RPL

- Change Product Code

- Repair Corrupted AMSS Problems after TP Boot Repair

- Direct Write Custom Firmware to WP_OS Partition

All eMMC Direct Functions requires Qualcomm OSBL.

If you have a Lumia 710 with DLOAD OSBL, you can flash the Phone via USB to get Qualcomm OSBL.

If you have a Lumia 800 with DLOAD OSBL, you need to use TP Method and write QCOM OSBL via TP.

If you have Lumia Lumia 510, 610 or 900, then you cannot use eMMC Direct Module on them.



IMPORTANT INFORMATION

- You need "Administrator Rights" if you want to use the eMMC Direct Module.

Easiest way to get Administrator Rights is to go to C:\AdvanceBox Turbo Flasher\

then RIGHT-CLICK Mouse on "AdvanceBox.exe", then select:

--------> 'Run as administrator'

You need to do this everytime you want to use the eMMC Direct Module

[miguelpaolo]

ATF Super CMLA Repair, Direct PM-308 v.9.40 Update!! 20 DEC 2012!!

Release Date: December 20, 2012
Firmware Version Required : 10.3.30


"A Jingle BELLE OS Update"

Introducing ATF Super CMLA Key Repair and Direct PM 308 Security Block Write Back to SL3 Phones!
(New Hashes Requires ATF Network Phone Authorize)


Now you can Write Back your Original PM 308 Phone Backups back to the Phone!

--> The Super Dongle Key will Remain 100% Original
--> The CMLA Key will Remain 100% Original


But if you don't have PM 308 backup, then you can use Repair CMLA Key to allow
your phone to run the Latest Symbian Belle OS Releases. This Second option allows
you to to write CMLA Keys to any SL3 Phone even without PM 308 backup.


QUICK Q/A INFO:

Question: What is CMLA ?
Answer : It is basically some keys to be used for Digital Rights Managment. (CMLA Home)

Q: Why do we need CMLA Keys?
A: CMLA is checked and used when running Belle OS on majority of the newest SL3 Smart Phones.

Q: Do all phones need CMLA Keys?
A: No, but Majority Needs it.

Q: How do I know that my Phone needs CMLA Key Repair?
A: If your phone cannot start Belle OS and is just showing your scrolling Dots o o o o o o ....

Q: If I don't have ATF Box, how can I repair CMLA Keys?
A: Buy Original RPL, you will see CMLA_KEY inside... or just Buy Preactivated ATF Nitro Box.

Q: Is CMLA Repair using ATF Free?
A: Yes, but you need to Authorize Phone first via the ATF Network if your Phone is "New HASH".

Q: What is PM 308 Security Write Back Feature?
A: It is a feature that allows you to WRITE BACK PM 308 to SL3 Phones.

Q: Can I write back PM 308 from Phone A into another Phone B?
A: No, the PM 308 Backup must be from the same phone.

Q: I don't have PM 308 Backup, what can I do now?
A: Use Repair Super Dongle and Repair CMLA Keys instead.

Q: I cannot find this new feature in ATF 9.40, how do I use it?
A: It is completely integrated into the ATF Software, so just use "Write PM" function in ATF Software.

Q: Do I need to AUthorize Phone First before I can use this new feature?
A: Yes, the phone needs to be Authorized by The ATF Network if your phone is "New HASH".



Other Updates:

- Added RM-862, RM-863, RM-864, RM-872 and RM-873 for Infineon/Intel XG213 Decrypt PM 120 HASHES
- Added New Nokia Products in Nokia.ini
- Fixed Minor BB5 USB Booting from 9.30





__________________________________________________ ________________________


ATF Super CMLA Repair, Direct PM-308 v.9.40 Update!! Public Discussion Thread:
ATF Super CMLA Repair, Direct PM-308 v.9.40 Update!! Public Discussion Thread:

[miguelpaolo]

ATF v9.50 Update!! Public Discussion Thread:


Release Date: January 22, 2013
Firmware Version Required : 10.3.30


"Initial 2013 Update"


What's New?

* Infineon XG110 FBUS read HASH for LBF (Stand Alone)
* Lumia eMMC Direct Now supports Newer WP_OS 7.8 Partition Direct Write (For QCOM Phones)
* Added Vista/Win7/Win8 32/64-bit "Run-As-Admin" Manifest (No need to right-click exe)
* Latest BB5 Flash Loaders Package 12.46.000.1
* Latest Nokia_Connectivity_Cable_Driver_7.1.101.0
* Latest WinUSB 32/64 bit Drivers

What was Changed?

* Improved Booting Speed on XG110 FBUS Phones
* Improved Application SKIN Handling

Other Stuff

* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of Jan-22-2012)
* Complete Product Listing in Nokia.ini (as of Jan-22-2012)

A Friendly Reminder
################################################## ##########################
## #
## YOU HAVE 1 MORE WEEK TO DOWNLOAD FLASH FILES VIA NAVIFIRM #
## #
################################################## ##########################

[JULIAN35]

ATF v9.51 Auto Update!! Public Discussion Thread:
9.51 (auto update)
Release Date: January 23, 2013


"Fixed INVALID FILENAME Error in Infineon FBUS LBF"








A Friendly Reminder
################################################## ##########################
## #
## YOU HAVE 1 MORE WEEK TO DOWNLOAD FLASH FILES VIA NAVIFIRM #
## #
################################################## ##########################

[elcorrentino25]

ATF Lumia TP v.9.60 Update!! 28 FEB 2013!!
Release Date: February 28, 2013
Firmware Version Required : 10.3.30 or 10.3.50


"Lumia TP Updates"


What's New?

* Lumia 510 (RM-889, RM-898) Dead Boot Repair Supported
* Lumia 505 (RM-923) Dead Boot Repair Supported
* Lumia 510 TP Pictures Added
* Lumia 900 "Unlocked Bootloader" added (Qualcomm OSBL)


Something for Developers (Requires Password)

* Lumia eMMC RAW Read/Write via TP "CUSTOM Read or WRITE" Option
* Supported Phones: Lumia 505, 510, 610, 610C, 710, 800, 800C and 900
* Password is 70617373776F7264


Small Bug Fixes

* Skipped checking SRP and iOS Service Cost during Phone Authorize
* Fixed Simlock Recovery Bug on phones with APE NAND Flash Chips

Other Stuff

* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of Feb-28-2013)
* Complete Product Listing in Nokia.ini (as of Feb-28-2013)


******************************************
* LogiCore 10.3.50 OPEN BETA COMING SOON *
******************************************

In preparation for the Release of LogiCore 10.3.50, we are looking for
ATF Users who are willing to participate in testing the new features
of this Firmware.

1. Beta Testers needed - To test the Stability of LogiCore 10.3.50 Beta
2. Beta Testers needed - Who have soldering skills and familiar with JTAG


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/



__________________________________________________ ________________________

[miguelpaolo]

ATF v9.70 Update!! Public Discussion Thread:

Release Date: March 25, 2013
Firmware Version Required : 10.3.50


ATF Box New Firmware LogiCore 10.3.50 Official Release
--> Support ATF JAM (JTAG Access Module)
--> Support ATF SAM (Samsung Access Module)

More info about ATF JAM and ATF SAM will be released very soon!


What's New ?

* Added "Create ENO FPSX" button in 'Read Flash' tab which will allow
you to extract ENO Blocks from FLASH DUMPS made by ATF Software. The resulting ENO File will be in Plain FPSX format and can be used on
phones which have the same ROOT_KEY_HASH as the original FLASH DUMP.

Normally, Dumping the first 16 MB of the Flash Chip is enough to
extract the ENO Blocks. If the ENO cannot be found, then try 32 MB.

* SD Card Password BF Unlock now supports Customized MASK Files so
you can make your own MASK files using any Unicode 16-Bit (2 bytes)
characters. This will allow you to BruteForce NON-ENGLISH/LATIN
characters. More info about Unicode here:
List of Unicode characters - Wikipedia, the free encyclopedia

You can check our support forum for a STEP-BY-STEP instruction on
how to create and use your own MASK Files.

* Updated Lumia 505 RM-923 Repair Boot Files
* Uploaded Lumia 505 RM-923 Test Point Pictures


Bug Fixes:

* Fixed Lumia 505 RM-923 detection as Windows 7.8 Phone
* Fixed Lumia Custom eMMC Read/Write file handler
* Fixed Lumia eMMC Direct Drive Number Detection

Other Stuff

* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of March-25-2013)
* Complete Product Listing in Nokia.ini (as of March-25-2013)



For this Update we give Special Thanks To:

dj kidd (Mexico) for Sending Lumia 505 Phone
WAJID (Dubai) for Beta Testing
Angel for reporting Bugs


Who will buy this if you can get more in ATF?

[Fixcell]

ATF Lumia WP8 TP Update!! 30 April 2013!!

Release Date: April 30, 2013
Firmware Version Required : 10.3.50


Lumia Windows Phone 8.0 Dead Boot Repair via TP

Supported Phones:

Lumia 520T RM-913
Lumia 520 RM-914
Lumia 520 RM-915
Lumia 521 RM-917
Lumia 620 RM-846
Lumia 720 RM-885
Lumia 720T RM-887

Supported Partition Repairs:

M.B.R. (Master Boot Record)
G.P.T. (GUID Partition Table)
SBL1
SBL2
SBL3
UEFI
RPM
TZ
WINSECAPP

Custom Read/Write eMMC Blocks also supported. The password is still
"password" in HEX format.

(Hint: RPL and Simlocks are inside a FAT12 Mountable Partition called DPP)


Added Test Point Pictures for 520T, 520, 521, 620, 720 and 720T



What's New ?

* Lumia Windows Phone 8.0 Dead Boot Repair via TP
* ATF FiRE Server Capable EXE (Flash Files/Links are still uploading)


Bug Fixes:

* Fixed Lumia Custom eMMC Read/Write Bug on new Hynix eMMC
* Fixed SD Card Custom Password Masking

Other Stuff

* Complete Product Listing in Nokia.ini (as of April-30-2013)



For this Update I give Special Thanks To:

X-shadow's Wife for editing the Test Point Pictures for the new Lumia Windows 8.0 Phones.

Download Full Installer

[3zr3vnoc]

ATF AutoUpdate v9.83 - Some New Stuff - 08 May 2013
Release Date: May 08, 2013
Firmware Version Required : 10.3.50

*** Only Available via the AutoUpdate Server ***

1.
Lumia WP8 Recovery Flashing Added

Supported Phones:

All Lumia WP8 Phones

This will allow re-flashing of Lumia Phones which encountered an error during a previous firmware update (incomplete flashing). This will only work if BOOT Loaders are still OK.

To perform recovery flashing:
1. Run ATF Software, load the flash WP8 Flash File and click FLASH.
2. Hold VOLUME_DOWN + POWER button until the phone will vibrate.
3. Release VOLUME_DOWN + POWER button then connect USB Cable.
4. Recovery Flashing will start and will Fix Partitions.


2.
BB5 Read Firmware Version via Flash Mode

Supported Phones:

All Single-CPU BB5 Phones (RAP3, RAPIDO, RAPUv1, RAPUv2, Broadcom and XG223)

NOT Supported Phones:

All Dual-CPU BB5 Phones (E90, N90, N95, N95-8GB, N73, N80 etc...)

This will allow you to know the current firmware version inside the phone just in case the phone is dead. It will also prevent you from accidentally DOWNGRADING any BB5 Phone. USB and FBUS Connection are both supported.

To check current firmware version:
1. Click "Buscheck" or "Backup RPL" Button


3.
Added Alternative USB Boot Method in Settings

In Settings --> Nokia Settings, check this:

Use BB5 USB Boot Settings Type 2 (Fixes Booting Problem on some PC)

If you get BB5 Booting Problems stuck at:
"FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)"



* Complete Product Listing in Nokia.ini (as of May-08-2013)

ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/

[poncito]

ATF Auto Update v9.84 - Some New Stuff - 09 May 2013
ATF Auto Update v9.84 - Some New Stuff - 09 May 2013

Firmware Version Required : 10.3.50

*** Only Available via the Auto Update Server ***


Fixed Read Firmware Information via Flash Mode for some RAPU based phones (E5-00, C5-00, E6-00 etc...)

ATF Lumia WP8 TP v9.84 Update!! :
ATF v9.84

Release Date: May 09, 2013
Firmware Version Required : 10.3.50

*** Only Available via the AutoUpdate Server ***


advance box
Fixed Read Firmware Information via Flash Mode for some RAPU based phones (E5-00, C5-00, E6-00 etc...)


Mensaje modificado por poncito el May 9 2013, 08:41 AM