Actualizaciones De Cyclone!!!! Solo Actualizaciones, Cualquier Otro Mensaje Es Eliminado Opciones

[cellcentersps]

Cyclone 2012 New Release Installer


Cyclone 2012 New Release Installer

=====================
Installer v1.20
30.04.2012
=====================
- New Loaders v11.50.00 added
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added
- New Product - Cyclone Box Reloaded support added
- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- "New Downgrade" BB5 method added (tick in before-flash tasks)
- When Windows 7 is detected, software is not hidden to tray
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.
- Box Registration module removed
- Box Maintenance module removed
- Card Maintenance module removed
- The paths is now updated on each sw startup
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- Splash updated
- CBUS Lost Handle Fixed
- Only one copy of Cyclone Box application can be launched now, this improves stability
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did containt Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confussion
- "Join us on estafadores____" added at main software
- "cyclonebox.dll not found" message when no drivers installed changed to suitable messagebox asking to connect your box first time and install drivers
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- FastMM v4.99 Introduced
- Skin Stack Updated to v7.62
- libeay/ssleay libraries updated to latest one, much more fast and stable
- Minor changes and bugfixes

ALWAYS fresh installer you could find at http://www.karwos.hk/CycloneBoxInstaller.exe

Mensaje modificado por cellcentersps el May 3 2012, 06:10 PM

Fichero(s) Adjunto(s)

 20120503... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 296.21k ) Número de descargas: 0
 20120503... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 225.63k ) Número de descargas: 0

 

[Anunciante Autorizado]

[Eliminado_matibox_*]

aqui para los que quieren hacer su descarga directa

Fichero(s) Adjunto(s)

 CycloneB... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 36.64mb ) Número de descargas: 118

 

[netvista]

CycloneBoX instalador v1.20 (05/04/2012)

Fichero(s) Adjunto(s)

 CycloneB... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 36.63mb ) Número de descargas: 209

 

[pelillo]

Traduccion:

Cyclone 2012 Nueva versión del instalador


Cyclone 2012 Nueva versión del instalador

=====================
Instalador v1.20
30/04/2012
=====================
- Nuevos cargadores añadido v11.50.00
- MEP-40488-004 añadido
- Xgold113 (Dual-SIM) RPL añadido soporte de escritura
- Nuevos Productos - Cyclone Box Reloaded apoyo añadido
- Proyecto refactorizado, completamente desde cero. Compilador cambiado de obsoleto Delphi7 de Delphi2007. Solo por esto, un montón de estabilidad y velocidad adquirida.
- "Noticias", agregó en la ventana principal
- No necesita más para marcar la casilla "Método antiguo USB flashing" de forma manual, se detecta de forma automática
- "Downgrade Nueva" BB5 método agregado (marcar antes de las tareas-flash)
- Cuando se detecta Windows 7, el software no se oculta a la bandeja
- Añadido de Windows 7 barra de progreso interactiva cuando se minimiza a la bandeja. Cuando el software se reduce al mínimo, te darás cuenta de estado de trabajo actual: verde barra de progreso - barra de progreso de trabajo, de color rojo - error, de color amarillo-hizo una pausa, etc
- La recuperación de arranque añadido para todas las cajas durante el asistente de caja de
- Gestor de arranque volvió a v2.13 (temporal solución, v3.01 pondremos en contacto en breve)
- Recarga automática de tarjeta inteligente cuando está vacío addded
- Se ha añadido COD-> verificación de NCK en la generación de datos
- Después de COD-> cálculo de NCK, NCK códigos se almacenan automáticamente dentro del archivo COD
- Nuevos Caminos está agregados a los valores de la tabla de búsqueda de Flash Path (C: \ Users \ xxxx \ AppData ... etc)
- Problemas de permisos Windows7 fijo (es necesario "Ejecutar como administrador" para funcionar correctamente con actualización automática)
- Software se ha rediseñado ahora. Para obtener funcionalidad completa USTED NO NECESITA ejecutar como "Administrador". Esto significa que se puede garantizar la calidad de nuestro software y la seguridad - no hay troyanos ocultos (como sucedió antes con otros productos).
- Asistente para cuadros Añadido, lo que es todo-en-una herramienta que: reparación, actualización, activar, registrar, la recuperación del gestor de arranque, tarjeta inteligente de recarga, la actualización del gestor de arranque, la caja, etc. Con un solo clic.
- Módulo de Registro de Caja eliminado
- Módulo de Mantenimiento Caja eliminado
- Módulo de mantenimiento de las tarjetas eliminado
- Los caminos se actualiza en cada arranque de sw
- Corregido el Windows7 guardar los caminos / Configuración problema
- BB5 problemas del cargador cuando la piel enbled (ROM se negó ... etc)
- Violación de acceso a la salida fija
- Splash actualizada
- CBUS perdido mango fijo
- Sólo una copia de la solicitud Cyclone Box puede ser puesto en marcha ahora, esto mejora la estabilidad
- Enviando el código NCK fijado para SIMLOC30 teléfonos (error 0x01)
- Las cuestiones de la bandeja fija
- Código de Actualización y está comprobando instalador instalado, si obsoleta luego pide la última versión de descarga
- Mejora de la copia de seguridad RPL en modo USB (Custom Loader no restablecer teléfono para Flashmode, y algunas copias de seguridad hizo containt SuperDongle / bloqueo de la SIM de datos)
- XGold / servicio de BlackBerry "Créditos" renombrado a "Counter" (porque es un contador, no reales de pago de los créditos), ya que pone mucha confusion
- "Únete a nosotros en xxx", agregó en el software principal
- "No cyclonebox.dll encontrado" cuando no hay controladores instalados cambiado de mensaje preguntando adecuada para conectar el tiempo de primera caja e instalar los controladores
- "Problema de seguridad n º 1" resueltos a los que copian cyclonebox.dll antes
- Solución de interrupción de los problemas de actualización automática (después de reiniciar - esto no es aplicación Win32 válida)
- Introducido FastMM v4.99
- Pila de la piel ha actualizado a la v7.62
- Libeay / ssleay bibliotecas actualizado a la última uno, mucho más rápido y estable
- Cambios menores y correcciones de errores.

Fichero(s) Adjunto(s)

 cyclone_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 183.56k ) Número de descargas: 0

 

[josue85]

All LG Instant Unlock by IMEI Added! COMPLETLY FREE! Just put IMEI and you will get all needed codes (SIM unlock, Network unlock, etc). Use “Server tools”.
The “Credits tool” is now known as “Server Tools”.
New default skin introduced
Minor changes and bug fixes

Todo instante de LG liberar por IMEI agregado! COMPLETAMENTE GRATIS! Acabo de poner IMEI y obtendrá todo necesita códigos (SIM desbloquear, red de desbloqueo, etc.). Utilizar "Herramientas de servidor".
La "herramienta de créditos" ahora se conoce como "Herramientas de servidor".
Nueva máscara predeterminada introdujo cambios menores y correcciones de errores

A 11 personas les gusta esto.

Alexandru Tudoriu: cyclone can unlock any lg by imei?

Cyclone Box: And what you see here, what we announced ?

Alexandru Tudoriu: you're awesome
Sacado del xxx de Cyclone solo se debe actualizar programa

Mensaje modificado por josue85 el May 13 2012, 04:24 PM

[jorcomax11]

All LG Instant Unlock by IMEI Added! COMPLETLY FREE! Just put IMEI and you will get all needed codes (SIM unlock, Network unlock, etc). Use “Server tools”.
The “Credits tool” is now known as “Server Tools”.
New default skin introduced
Minor changes and bug fixes

Todo instante de LG liberar por IMEI agregado! COMPLETAMENTE GRATIS! Acabo de poner IMEI y obtendrá todo necesita códigos (SIM desbloquear, red de desbloqueo, etc.). Utilizar "Herramientas de servidor".
La "herramienta de créditos" ahora se conoce como "Herramientas de servidor".
Nueva máscara predeterminada introdujo cambios menores y correcciones de errores

A 11 personas les gusta esto.

Alexandru Tudoriu: cyclone can unlock any lg by imei?

Cyclone Box: And what you see here, what we announced ?

Alexandru Tudoriu: you're awesome
Sacado del xxx de Cyclone solo se debe actualizar programa

 blue2.jp... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 160.55k ) Número de descargas: 0

Download Cyclone.exe

C:\Archivos de programa\Archivos comunes\Cyclone Box

http://www.karwos.hk/updater/Cyclone.exe

http://www.siroya.org/Downloads/Cyclone.exe

[dcerini]

nueva interfaz fondo BLACK, excelente actualizacion.

Gracias TEAM CYCLONE

[netvista]

CycloneBox Added ALL LG Phone Unlock by imei

Fichero(s) Adjunto(s)

 Cyclone_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 3.48mb ) Número de descargas: 255

 

[encr]

Firmware v02.02 Released for Classic and Reloaded boxes!



-BlackBerry MEP-11534-010 Added (FIRST IN THE WORLD)!
- Support for MEP-09292-008 Fixed!


Just use “Box Wizard” to upgrade your box Firwmare!
Stay Tuned , Coming back Shortly with More Hot Stuff

Mensaje modificado por encr el May 20 2012, 11:52 AM

[newhwk]

 cyclone.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 61.13k ) Número de descargas: 1


Clic en Box Wizard para la actualizacion.. Saludos

[Eliminado_clark_*]

para que lo entiendan mejor


Actualización 05/20/2012
Firmware v02.02 Lanzamiento de cajas Classic and Reloaded! Sólo actualizar su caja utilizando Asistente para cuadros.
PRIMERO EN EL MUNDO BLACKBERRY MEP-11534-010 Desbloquee añadido!
Apoyo a MEP-09292-008 Fijo!
Sólo tiene que utilizar "Asistente de Caja" para actualizar su Firwmare caja! Permanezca en sintonía

[elbbel]

[mauro1988]

nueva actualizacion n9

Mensaje modificado por mauro1988 el May 30 2012, 01:46 PM

Fichero(s) Adjunto(s)

 ScreenSh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 174.97k ) Número de descargas: 0
 ScreenSh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 80.36k ) Número de descargas: 0

 

[Franklin505]

Cyclone HOT Update, Nokia N9 World's First SECURITY FUNCTIONS ADDED!!

Hi to all,

- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes

Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.

Few tests, Security Code Read w/o data loss:

[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00

SX4 Authorization (Make sure FORCE SX4 SERVER iss TICKED)

[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer © Nokia
IMEI 357923041454648
Mastercode 555726146
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready.
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
Disconnected from Cyclone Server

And just basic read info...

[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer © Nokia
IMEI 357923041454648
Mastercode 555726146
IMEI Spare 3A75290314546404
IMEI SV 3375290314546404F0000000
CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
PSN CZG234989
Product Code 059L7Z9
Module Code 0204965
Basic Product Code 059G8V7
PSD 0000000000000000
WLAN MAC 04A82A204D8F
Bootcode 2.0.49
Camera 0b:0125:02
APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, © NOKIA.
APE Test V 1.2.122
APE HW 1507
APE BT 00060000060d0020
RETU 11
TAHVO 00
AHNE 21
Asic 0
HW Signature
Simlock Server
Simlock Key 2440700000000000
Simlock Profile 0000000000000003
Simlock Aux
Simlock IMEI
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
[Nokia N9 USB Phonet]: Port opened OK!
Product Code: 059L7Z9
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering DCT4 Products - wait...
5 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering BB5 Products - wait...
8 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-696 - wait...
1 Variants Retrieved
No variant found with given Product Code, selecting first one

Mensaje modificado por franklin505 el May 30 2012, 02:04 PM

[miguelcpm22]

Hi, new firmware for Cyclone Box is ready.

What's new?
- Added support for Blackberry MEP-14896-006 - FIRST IN THE UNIVERSE

Just update your box using "Box Wizard"

[thebest1989]

Firmware v02.04 Released.

Added support for Blackberry MEP-27501-001
Added support for Blackberry MEP-09292-007

Just use Box Wizard to update your box

Stay tuned,
More to come,
Cyclone Box Team

[3zr3vnoc]

FREE Cycator Released for Cyclone Box Users

Hello,

What is Cycator?
This is software intended exclusivly for Cyclone Box Users which are also HW repair engineers.

Where from download?
Use Germany Server, it's in 'Cycator' Directory. Use WinRar for unpacking.

How to work with Cycator?
1. Launch Cycator SW.
2. Select Product (we will post list tomorrow, for example Tube is 5800Xm, Picollo is 6300, Picollino is 5130xm, etc). Current revision (11062012) support 69 products and PCB versions.
3. Now you can either select component from list:

N6501 4605987 ACCELEROMETER 3-AXIS 2.5V LGA14
N7520 4355951 PW AMP GSM/EDGE850/900/1800/1900
N7540 4355898 PW AMP WCDMA 824-915/1710-1980MHz
N7541 4346537 DC/DC CONV for WCDMA PAs WLCSP8
N7590 4348579 DC/DC CONV FOR RFIC WLCSP8
R1400 1430770 CHIPRES 0W06 4K7 J 0402
R1401 1430726 CHIPRES 0W06 100R J 0402

and so on... and selected component will be shown on phone PCB.

second option is to write in combobox needed component number (i.e. R1400), or just Nokia Part Number.

Another option is just to point a component by mouse and on bottom-left you will see an exact component name

How it looks?

 Cycator.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 102.34k ) Número de descargas: 0


If the users will be happy, we will be constantly updating Cycator database.

Mensaje modificado por rey00 el Jun 11 2012, 02:12 PM

[cellcentersps]

FREE Cycator Released for Cyclone Box Users

Hello,

What is Cycator?
This is software intended exclusivly for Cyclone Box Users which are also HW repair engineers.

Where from download?
Use Germany Server, it's in 'Cycator' Directory. Use WinRar for unpacking.

How to work with Cycator?
1. Launch Cycator SW.
2. Select Product (we will post list tomorrow, for example Tube is 5800Xm, Picollo is 6300, Picollino is 5130xm, etc). Current revision (11062012) support 69 products and PCB versions.
3. Now you can either select component from list:
and so on... and selected component will be shown on phone PCB.

second option is to write in combobox needed component number (i.e. R1400), or just Nokia Part Number.

Another option is just to point a component by mouse and on bottom-left you will see an exact component name

How it looks?



If the users will be happy, we will be constantly updating Cycator database.

Fichero(s) Adjunto(s)

 Cycator_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 17.02mb ) Número de descargas: 64

 

[dapx]

Worlds First Nokia 808 Pure view Fully supported by CycloneBox


FLASH
READ/WRITE RPL
UNLOCK by LBF
All operations are fully supported by Cyclone Box

 nokia_80... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 40.1k ) Número de descargas: 1


 102lt.jp... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 38.52k ) Número de descargas: 0


 93323991... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 104.16k ) Número de descargas: 0

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-807_112.020.0310_79u_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 7E600000FFFB7C40A413E6385CF93EAFD753B702
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
RM-807_112.020.0310_79u_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.48.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0060 (Samsung), Size: 1024MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.48.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x0007FFFF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x008BFFFF, ONENAND
EraseArea[0,CMT]: 0x010C0000-0x170FFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.419s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT SOS+DECOMP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS+IVE3A Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 24.39s
Flashing Speed: 47839.34 kBit/S
Processing RM-807_112.020.0310_79u_prd.core.fpsx (APE)...
Processing RM-807_112.020.0310_20.01_Chinese_HK_79u_prd.rofs2.fpsx (CMT)...
RM-807_112.020.0310_20.01_Chinese_HK_79u_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Started group flash erase
EraseArea[0,CMT]: 0x0D1C0000-0x135BFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.390s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.191s
Flashing Speed: 56095.44 kBit/S
Processing RM-807_112.020.0310_20.01_Chinese_HK_79u_prd.rofs2.fpsx (APE)...
Processing RM-807_112.020.0310_214.01_default_79u.2012.17_prd.rofs3.fpsx (CMT)...
RM-807_112.020.0310_214.01_default_79u.2012.17_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Started group flash erase
EraseArea[0,CMT]: 0x01678000-0x0169FFFF, ONENAND
EraseArea[0,CMT]: 0x135C0000-0x170FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.280s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Writing CMT SOS+IVE3B Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.546s
Flashing Speed: 1666.36 kBit/S
Processing RM-807_112.020.0310_214.01_default_79u.2012.17_prd.rofs3.fpsx (APE)...
Processing RM-807_112.020.0310_214.01_default_79u.2012.17.uda.fpsx (CMT)...
RM-807_112.020.0310_214.01_default_79u.2012.17.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Started group flash erase
EraseArea[0,CMT]: 0x17100000-0x3E5FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 2.387s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 26.224s
Flashing Speed: 47858.86 kBit/S
Processing RM-807_112.020.0310_214.01_default_79u.2012.17.uda.fpsx (APE)...
Processing RM-807_112.020.0309_C00.01_79u_prd.rofs3.fpsx (CMT)...
RM-807_112.020.0309_C00.01_79u_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Started group flash erase
EraseArea[0,CMT]: 0x01678000-0x0169FFFF, ONENAND
EraseArea[0,CMT]: 0x135C0000-0x170FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.280s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Writing CMT SOS+IVE3B Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.546s
Flashing Speed: 218.51 kBit/S
Processing RM-807_112.020.0309_C00.01_79u_prd.rofs3.fpsx (APE)...
Processing RM-807_112.020.0310_79u_prd.core.fpsx (CMT)...
RM-807_112.020.0310_79u_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x0007FFFF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x008BFFFF, ONENAND
EraseArea[0,CMT]: 0x010C0000-0x170FFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.420s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT SOS+DECOMP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS+IVE3A Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 24.24s
Flashing Speed: 47869.21 kBit/S

Br
CycloneBox Team

Que más les puedo Decir... Cyclone Rules!!!!

Saludos. Enjoy!

[miguelpaolo]

[25.06.2012] Cyclone Box Installer v1.21 Released

--------------------------------------------------------------------------------

Hi to all, new Installer for Cyclone Box is ready to download.

What's new?


Quote:
=====================
Installer v1.21
25.06.2012
=====================
- New BB5 FBUs/USB Loaders v12.08.00 Added
- Qualcomm Based Products support added (Lumia 800, 610, etc)
- Normal mode Flashing is supported
- Dead-mode flashing is supported
- Downgrade is supported
- Support for Multi-CNT Qulacomm Configurations
- Support secure-erase USER Area - this takes about 15-25 minutes
- Basic read info including battery information etc for Lumia products
- Automatic Variant selection for Lumia products
- Cross-flash is supported, if Public Key hash matches
- After connecting product in Normal mode, Zune drivers must be installed. Take them from C:\Program Files\Cyclone Box\Drivers\ZuneDrivers
- Flashing drivers will be installed automatically, however on some problems just install them manually from C:\Program Files\Cyclone Box\Drivers\LumiaFlashing
- Abort Button improved
- SX4 Default Database updated, added 30 new models
- Nokia Connectivity cables drivers updated to v7.1.78.0
- Minor changes and bugfixes

Small tests:


800 FF


Quote:
If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2012-02-17 14:40:05
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 08F70ECD76F6E4EE142BE82BA00143C3E4BC91036680A62C2A 3EF07508099060B5BCAD7BA00D151307A006BB
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM801_12w14_prod_generic_nokia_osbl.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:40:02
Signer S/N: 1725
Signer User ID: 10275021
Auth Level: Care
Data Encryption: 0
Image Index: 1
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 936.552kB @ 0x000000000007D200
Write taken 0.437s (Average speed: 17556,36kBits/s)
ESCO: Processing RM801_12w14_prod_generic_adsp.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:37:16
Signer S/N: 1735
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 3
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "adsp.mbn" (5.368MB)
Flushing...
Flushed OK
Write taken 7.847s (Average speed: 5730,02kBits/s)
ESCO: Processing RM801_12w14_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:40:01
Signer S/N: 1738
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (15.961MB)
Flushing...
Flushed OK
Write taken 24.243s (Average speed: 5515,28kBits/s)
ESCO: Processing RM801_12140_prod_760_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98022316
Signer Timestamp: 2012-04-20 12:32:28
Signer S/N: 1110
Signer User ID: 508009728
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 353.543MB @ 0x0000000010000000
Write taken 139.823s (Average speed: 21209,86kBits/s)
ESCO: Processing RM801_12w14_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:36:19
Signer S/N: 1719
Signer User ID: 10275021
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000003C000000-0x000000077DFFFFFF (29.32GB)
Erase taken 11.232s
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1750.0805.8773.12140
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer © Nokia
IMEI 359289045145774
Mastercode 5573422330
Public ID 8F07A22B55784E8C893370340D947D55
Product Code 059M3C1
Basic Product Code 059J2N6
Module Code 0205051
NCSd Version 1.9
HW Version 112.1402.2.3
SW Version 1750.0805.8773.12140
PSN Number 0022D28AB
ESN 00000000
WLAN MAC 6CE9070E42230000
BT ID 6CE9071AEF6B000000000000
Battery Life 35%
Battery Cycle Count 65535
Battery Temperature 38.6C
Battery Voltage 3795mV
Battery Flags 297
Battery Standby Current -6mA
Battery Max Load Current -800mA
Battery Health 860
Battery Average Current -27mA
Battery Remaining Capacity 482mAh
Battery Full Charge Capacity 1394mAh
Read info thread finished, continuing...
Flashing Successfull!

610 FF

Quote:
If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode...
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v256.0
Build: 1
Timestamp: 2012-02-22 11:37:26
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 501AFF8D3A1D2B693BD8FEC40C1C55C5CB7F7E7DAF2FF78CEA 254978752CF80142347C1C31C0AB751C001F38
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM835_12w16_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-13 19:53:21
Signer S/N: 2315
Signer User ID: 10318699
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (18.229MB)
Flushing...
Flushed OK
Write taken 18.782s (Average speed: 8139,50kBits/s)
ESCO: Processing RM835_12w16_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-13 19:50:07
Signer S/N: 2312
Signer User ID: 10318699
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000004C000000-0x0000000795FFFFFF (29.160GB)
Erase taken 0.172s
ESCO: Processing RM835_12160_prod_296_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98030051
Signer Timestamp: 2012-04-19 06:27:32
Signer S/N: 953
Signer User ID: 2150079744
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 307.683MB @ 0x0000000028000000
Write taken 94.115s (Average speed: 27422,85kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1066.0000.8773.12160
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer © Nokia
IMEI 359313043774250
Mastercode 551675110
Public ID 88B3433D92343DDEFFED8DFC7EF2952F
Product Code 059P4D7
Basic Product Code 059L3R3
Module Code 0205127
NCSd Version 1.9
HW Version 112.1569.1.0
SW Version 1066.0000.8773.12160
PSN Number 0468BC2AB
ESN 00000000
WLAN MAC 3C363D77083A0000
BT ID 3C363D75337A0000FFFFFFFF
Battery Life 29%
Battery Cycle Count 65535
Battery Temperature 29.3C
Battery Voltage 3787mV
Battery Flags 312
Battery Standby Current -3mA
Battery Max Load Current -500mA
Battery Health 356
Battery Average Current 142mA
Battery Remaining Capacity 381mAh
Battery Full Charge Capacity 1322mAh
Read info thread finished, continuing...
Flashing Successfull!

Where from download?
ALWAYS FRESH installer you can get at: http://www.karwos.hk/CycloneBoxInstaller.exe
Uninstalling old version is RECOMMENDED before installing this one, however not ordinary.
You don't need to download Installer MANUALLY. It will be downloaded automatically, if you are having some of last Cyclone build with autoupdate module.

Lumia Flashing drivers will be installed automatically (according to your CPU architecture).
However, ZUNE drivers (when you are attaching phone in Normal mode) need's to be installed Manually from C:\Program files\Cyclonebox\Drivers\ZuneDrivers. This you need to ONLY ONCE.

Firmware upgrade is not needed.

Join us on xxx: Cyclone Box | xxx

Stay tuned,
Cyclone Team