Actualizaciones De La Riff Box Solo Aqui Opciones

[miguelpaolo]

JTAG Manager Version 1.38, RIFF Box Firmware v1.29, Tegra 2 Support ! ! !

JTAG Manager
---------------------------

. Added feature to disable Target ID check during resurrection

. Added preset "Erase Full NAND/NOR Memory" (this use Settings by Code button)


Firmware 1.29
---------------------------

• MPCore targets handling is improved.

• Fixed bug in the ARM7 handling routines: h/w breakpoints were disabled each time any halt operation was performed

Added auxiliary instruction which improves GDB Server functionality.


Full Details here: Update News

[b]Bug Fix
[/b]
Samsung_I9100.dll (Exynos4210)
-------------------------------------
- Resurrection is full now (FBL, IBL and PBL loaders as was noted in previous version of DLL were not resurrected)
Now complete boot area is resurrected, which guarantees that phone will power on after resurrection (if no h/w damage).


RIFF Box – JTAG Revolution

[Anunciante Autorizado]

[jhon357add]

RIFF JTAG – HTC Incredible S Unbrick, Unlock, CID, IMEI repair supported
by admin on Dec.30, 2011, under News
30.12.2011 HTC Incredible S Unbrick, Unlock, CID, IMEI repair supported

Resurrecting HTC Incredible S is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Incredible S boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM7230 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 1.13.0000. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG3213000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Incredible S:
Solder JTAG cable to HTC Incredible S JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Incredible S is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

[miguelpaolo]

RIFF JTAG - Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported

Added support for: 05.01.2012 Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[miguelpaolo]

RIFF JTAG -Samsung Update

10.01.2012 Samsung SGH-T759 Exhibit 4G Unbrick – Boot Repair supported

Added support for Samsung SGH-T759 Exhibit 4G

Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[dapx]

RIFF JTAG -Samsung GT-i8150 Galaxy W (Samsung Ancora) Unbrick – Boot repair supported
10.01.2012 Samsung GT-i8150 Galaxy W (Samsung Ancora) Unbrick – Boot repair supported

Resurrecting Samsung I8150 is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is dual core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.
To resurrect Samsung I8150:

Solder JTAG cable to Samsung I8150 JTAG pads;
Make sure Samsung I8150 is selected in the list of models;
Insert battery and connect USB Data cable;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:

Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.




Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

Saludos. Enjoy

[jhon357add]

RIFF JTAG – HTC Inspire 4G A9192 (HTC Stallion) Unbrick, Boot, IMEI, CID, ModelID, Unlock supported
by admin on Feb.01, 2012, under News
HTC Inspire 4G A9192 (HTC Stallion) Unbrick, Boot, IMEI, CID, ModelID, Unlock supported
Resurrecting HTC Inspire is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Inspire boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 0.85.0024. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD9812000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Inspire:
Solder JTAG cable to HTC Inspire JTAG pads;
Insert batter and connect USB Data cable;
Make sure HTC Inspire is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.
_

[Jack]

HTC Droid Incredible 2 ADR6350 Boot repair, Unlock, CID, ModelID, IMEI Update


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[jhon357add]

RIFF JTAG – HTC ThunderBolt 4G ADR6400 (HTC Mecha) Unbrick – Boot repair supported
by admin on Feb.14, 2012, under News
14.02.2012 HTC ThunderBolt 4G ADR6400 (HTC Mecha) Unbrick – Boot repair supported
Resurrecting HTC Thunderbolt CP (Modem Part) part is easy.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inside; sometimes during connection pressing Power On key may be required.
Please note, CP Part’s power is controlled by the AP Part, thus you may experience constant connection loses after definite ammounts of time (1-2-5-x seconds). If this keeps interferring the resurrection process, solder additionall JTAG interface cable to the AP pads, select AP resurrector DLL, go to the JTAG Read/Write page and halt AP core, then switch back to the CP JTAG interface.
To resurrect HTC Thunderbolt CP (Modem Part) Part:
Solder JTAG cable to HTC Thunderbolt CP JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Thunderbolt CP is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
Resurrecting HTC Thunderbolt AP (PDA Part) is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.04.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG0510000’.
There is option to reflash BOOT and RECOVERY zones.

[miguelpaolo]

24.02.2012 Samsung YP-G70EW Galaxy S WiFi 5.0 Unbrick – Boot repair, World first ! ! !

Samsung YP-G70 is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
To resurrect Samsung YP-G70:

• Solder JTAG cable to Samsung YP-G70 JTAG pads;
• Connect microUSB cable to phone and PC;
• Insert battery;
• Make sure Samsung YP-G70 is selected in the list of models;
• Make sure a fixed TCK frequency is selected;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold both 'Volume Down' and 'Home' keys and press Power-On.

.

[TRUENOFLASH]

RIFF JTAG - RIFF JTAG Manager v1.39 Released !

http://www.jtagbox.com/jtag-news/riff-jtag...leased-updates/




Whats new:
Fixed bug which caused poping-up of ‘Out of Free Disk space’ window error while real error was just a failed HASH.
eMMC chip size is now represented not only in bytes but additionally, for visual convenience, in Mega/Giga bytes
Addres/Length fields on DCC Read/Write and JTAG Read/Write pages are changed into custom GUI representation: now 12(or 8)-digit hex values are shown in more human ‘readable’ way.
For more convenient work with the DCC Read/Write page features there was added standard lengths list, so user can set ‘human readable’ length value instead of manual typing of correct hexadecimal length value. For this just click combo box near Data Length field and select a desired length.

Example:


JTAG


Now its possible to select any value from 1MB to 16GB, plus, in case of writing file, You can simply use “File Size” to automatically read opened file size and use it’s length.
Added balloon hints to suggest what to do in case user has ‘DLL was not Accepted’ issue.
Selected resurrector DLL version is shown in logging windows now along with Model name, for example:
“Selected Resurrector: [NoName x1234 V1.00]“
Added “Search for DLL” button on the Resurrection page:
As RIFFBOX grows up on number of supported devices, searching visually through the big lists of supported models for a definite device name became a tiresome procedure.
Now user can search for required model simply typing part of model name in the search dialog (for this select “Search for DLL for this Model Name” and type some part of device name you’re looking for)

Example:

GTAG2

Besides this, there is feature to search for resurrectors compatible with specific IDCODE. For example, if you have a not supported device in hands with ID = 0xXXXXXXXX, you can search for DLLs which work with such ID and try to connect your device using one of such ‘compatible’ DLLs. (for this select “Search for DLL with same IDCODE” and type IDCODE you’re looking for)
Example:

3

PLEASE NOTE!!! New resurrectors data base format is used in 1.39 version, thus
upon first start the JTAG MANGER WILL RESTART 1-5 TIMES in order to re-load and re-fresh all existing resurrector DLL

www.riffbox.org




saludos

[miguelpaolo]

27.02.2012 Samsung GT-P6800 Galaxy Tab 7.7 Unbrick – Boot repair supported, World First !

Samsung P6800 is based on the Exynos Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung P6800:

• Solder JTAG cable to Samsung P6800 JTAG pads;
• Connect USB cable to phone and PC;
• Insert battery;
• Make sure Samsung P6800 is selected in the list of models;
• Make sure a fixed TCK frequency is selected;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

[miguelpaolo]

28.02.2012 Samsung GT-S7500 Galaxy Ace Plus Unbrick – Boot Repair supported, World First ! ! !
RIFF JTAG - Samsung GT-S7500 Galaxy Ace Plus, Samsung SGH-i777 Galaxy S II


Resurrecting Samsung S7500 is easy.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect Samsung S7500:

• Solder JTAG cable to Samsung S7500 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure Samsung S7500 is selected in the list of models;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

[miguelpaolo]

29.02.2012 RIFF JTAG Updates:

• RIFF JTAG Manager v1.40
  Whats new:
  • Solved the problem with download of updates. Now no more nasty 'Out of Disk Space' error!!!Some users could experience this kind of error during download of large files (30MB and more). These errors were often with Wi-Fi configurations where certain routers dind't handled passive ports FTP data transfers properly.
  • Added check if JTAG Manager is running with administrator rights (in case it is installed in Program Files location).This solves issues for older operating systems (Windows XP) which have no UAC and no manifest means controlling elevation of application rights. Thus – now if the JTAG Manager is started without administator rights it will restart itself with request to run it "as administrator".
  • Embedded font for text message window on JTAG Read/Write page.
  • Improved displaying of DLL version information: If FileVersion info is available JTAG Manger will display it rather than the internal version supplied by DLL.This simplifies version tracking for us.
  • Download speed limit is increased to 250kb/s
  • Please click “Check for Updates” button in order to download and apply new updates.

29.02.2012 Samsung Wave 3 GT-S8600 Unbrick – Boot repair supported, World First ! ! ! Resurrecting Samsung S8600 is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.Please note, MSM8255T is dual core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.To resurrect Samsung S8600:

• Solder JTAG cable to Samsung S8600 JTAG pads;
• Make sure Samsung S8600 is selected in the list of models;
• Insert battery and connect USB Data cable;
• If you use only battery, press Power On key;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold both ‘Volume Down’ and ‘Menu’ keys and press ‘Power ON’ button.

.

[cellcentersps]

RIFF JTAG – Samsung GT-S5360 Galaxy Y Unbrick – Boot repair supported

by admin on Mar.01, 2012, under News

01.03.2012 Samsung GT-S5360 Galaxy Y Unbrick – Boot repair supported

Resurrecting Samsung S5360 is easy. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.

To resurrect Samsung S5360:

Solder JTAG cable to Samsung S5360 JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung S5360 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.

[jorcomax11]

RIFF JTAG – Samsung SGH-T499 Dart (Samsung Tass) Unbrick – Boot Repair supported

by admin on Mar.06, 2012, under News

06.03.2012 RIFF JTAG – Samsung SGH-T499 Dart (Samsung Tass) Unbrick – Boot Repair supported

Repairing bricked Samsung T499 is easy with RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.

To resurrect Samsung T499:

Solder JTAG cable to Samsung T499 JTAG pads;
Make sure Samsung T499 is selected in the list of models;
Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

Disconnect PC cable;
Insert battery;
Hold both ‘Volume Up’ and ‘Home’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.

 samsung_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 21.03k ) Número de descargas: 0

[encr]

13.03.2012 RIFF JTAG - SonyEricsson new BOOTROM support and more !

Whats new:

Unlock/Repair TA is now supported for new BOOTROM version in following models:

E15a (SE_E15a.dll)
E15i (SE_X8.dll)
U20a (SE_U20a.dll)
U20i (SE_U20i.dll)
E10i (SE_X10_Mini.dll)

HTC Neon Unbrick – Boot Repair, IMEI and CID update supported.

Mensaje modificado por encr el Mar 13 2012, 08:49 AM

[cellcentersps]

RIFF JTAG - HTC Sensation, EVO 3D, Samsung T989, i727, and more !
14.03.2012 RIFF JTAG Updates:

Whats new:

RIFF JTAG Manager v1.41
RIFF Box firmware v1.31
RIFF JTAG Direct JTAG Access plugin 1.03
Unbrick Samsung SGH-i727 Galaxy S II Skyrocket World First !
Unbrick Samsung SGH-T989 Galaxy S II World First !
Unbrick HTC Sensation (HTC Pyramid) World First !
Unbrick HTC Shooter (HTC EVO 3D) World First !


Who rules the Galaxy ?

[wasetec]

21.03.2012 RIFF JTAG Box Updates:

Whats new:


Added WORLD FIRST Samsung GT-P6810 Galaxy Tab 7.7 WiFi 16GB
Added WORLD FIRST HTC Sensation XL X315 / Bass (HTC Runnymede)
Bug fixes:

Samsung Galaxy i9003 (3 new DLL, with adjusted I/O voltage levels)
SonyEricsson E15i (ROM not supported bug fixed)
Torrent Tracker:

RiffBox_Setup_21.03.2012_v2.torrent
Remote Helper:

RemoteParyPart108_Universal_With_DarkSide

[miguelpaolo]

23.03.2012 RIFF JTAG – LG E510 Optimus Hub (LG Univa) Supported

Repairing bricked LG E510 with the RIFF Box is not very hard but it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

To resurrect LG E510:

• Solder JTAG cable to LG E510 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure LG E510 is selected in the list of models;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

• Disconnect PC cable;
• Insert battery;
• Hold 'Volume down' key and press 'Power ON' button. In few seconds you should see emergency mode screen saying "DOWNLOAD MODE".

.

[Eliminado_MrEdinson_*]

RIFF JTAG – Samsung SCH-i920 Omnia II 8GB Unbrick – Dead Boot repair supported

RIFF JTAG – Samsung SHV-E120S Galaxy S II HD LTE (Samsung Celox) Unbrick – Dead Boot Repair supported



Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution