!! Cyclonebox Installer v1.02 Released !!

--------------------------------------------------------------------------------

Finally Here we go with our major update



======================
== Installer v1.02 ==
======================

- RAP3Gv2 PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAP3Gv3 PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAP3Gv3 PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- RAPIDO PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAPIDO PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- SX4 Bypass added after PA_SL2 Unlock, if needed
- "Create RPL from phone" added. This is used to backup possible security data from phone in original NMP RPL format (plain one) this includes WMDRM Backup, All low-level certs (Nokia Public Certificate, Common Configuration Certificate, Hardware Certificate, VARIANT Cert), and Original SIMLOCK (only on PA_SL2 Phones !! ), which can be used to simlock restore / counter reset / PM 308 recreate - if needed - this data is sent directly to SIMLOCK SERVER directly so SL recreate is 100% "legal"
- Added Codes Counter Reset for PA_SL2 phones. Used to reset Keyboard/FBUS Code Counter.
- Added BB5 NCK Code FBUS Send (#pw+xxxxxxxxxxxxxxx+y), use especially when Keyboard counter is locked.
- Added BB5 NCK COde KEYBOARD Send (#pw+xxxxxxxxxxxxxxx+y), use especially when FBUS counter is locked.
- BB5 SL Export added. This exporting phone configuration key + simlock blocks to "SL5" file
- BB5 SL Import added. Used to import previously exported "SL5" structure to phone upon BB5 SP Initialization.
- BB5 PM -> Simlock RPL added, if PA_SL2 phone - use if simlock has been corrupted, and you have only PM backup. If PM have needed fields, it will create plain RPL file which can recreate simlock for you without headache.
- SL5 Creator support for Creating Relocked SL5 for desired MCC+MNC / Profile Bits
- Added "BB5_Autolock_IMSI.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to IMSI (one sim card).
- Added "BB5_Autolock_MCCMNC.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to MCC-MNC (operator).
- BB5 Plain RPL Write added.
- Added "UB Backup" option while writing BB5 Plain RPL (SIMLOCK AREA), since they aren't adding SHA-1 before SIMLOCK_DATA in RPL file - it needs be skipped in case.
- Added "Erase Security" option before RPL write. This is used when phone have problem with PM 308 blocks (downgrade, for example) and can't boot to accept superdongle / simlock data - in case, no need to full erase in case. Keep note that after RPL write YOU NEED SX4 Authorization with server and writing PM Fields 1 and 309. Otherwise your phone will fail to pass ST_SECURITY_TEST, and in effect will not boot.
- Skin stack updated to v6.30, this is more stable and fast
- Product code send added
- HWID send added
- PSN send added
- DCT4 Nand MASS MEMORY Partitioning added before write. May be skipped ticking apporiative Skip MM Part button.
- When no patch file found, SW will generate unlock codes for DCT4 unlock (asics 2,5,6,7)
- Security Code Mastercode is now being generated upon read info
- Added "Skip Patching" Option. Use for DCT4plus phones which are patched already, and all you need is to Initialize SP locks again (relock, etc)
- DCT4 NCK Key / FBUS Count is now being readed correctly
- DCT4 UEM OTP Imei Read added
- DCT4 SP Locks are being parsed upon read
- Added full support for Vista OS
- Added support for 64bit CPUs - tested on X64 XP Professional, should work on NT6 too
- BB5 Simlock backup before flash write no more asking user for directory, it's automaticlly saving to StoredFiles
- BB5 Simlock backup automatically saving backup in RPL format if possible (PA_SL2 phone detected), otherwise it will save it in PM format
- BB5 Booting routines totally refactorized
- After DCT4 Page erase, the last-error-status is now queried from phone
- Data checksum is now being checked again upon BB5 Flash Write
- When NPC Certificate are being backed up during SX4 Bypass, it is now stored as "PUBLIC_ID.Sx4Bypass.NPC.CMT.CRT", not "DowngradeRepair" as before
- When Writing BB5 Cert, it's now default pointing to StoredFiles
- User is now being warned before "Erase all certificates" - BB5 (avoid mistakes)
- For now, Erase All Certs erasing APE certificates too, if APE unit found
- DCT4 Plus 2680 v6.82 unlock partial fixed
- 2630 v57.20 Unlock added
- 2630b v57.20 Unlock added
- 2630b v06.82 Unlock added
- 2760b v06.82 Unlock added
- 2600c-b v06.82 Unlock added
- 1680c v06.82 Unlock added
- 1680c-b v06.82 Unlock added
- 5000db v 05.27 Unlock added
- 5000db v 05.45 Unlock added
- Included old "new security" unlock partials for 2630, 1680, 5000, 2680 - v6.82
- FastMM problem after exiting Main Application fixed
- Some DCT4Plus unlock bugs fixed (like This is Invalid Integer...)
- Added WD2 CBUS BT Phones support (bluetooth flashing problems)
- Check Flashing Bus (BB5) now booting phone completly, not only fetching 1st Boot Data
- Fixed problem when sometime wrong CMT / APE bootloader are being selected upon Certificate Operations
- Increased FBUS Timeout to repair FBUS transactions problems on some environments
- Netmonitor activation on DCT4/WD2 added
- WD2 Format User Area added
- "Initial SP corrupted" fixed on DCT4plus phones
- After finished flashing the sound now being played
- Cyclone HW Revision A112 support added
- Progressbar issue fixed while BT Flash
- SX4 Server Transaction fixed
- Bigger delay added after SX4 Bypass in order to handle PM write correctly
- More debug messages is now being shown upon BB5 booting
- Refactorized DCT4 ADSP Flashing routines
- DCT4 / BB5 Factory defaults after flashing fixed in some cases
- Minor changes and bugfixes
- Improved BB5 Local/Test mode changes
- Support : Fixed "Connection closed gracefully" in some cases
- Fixed problems when invalid IMEI are being readed out from phone (in case of phone wasn't initialized and FBUS problems occured)
- PM Write routines rewritten
- Security card is now being resetted before phone flashing, this have effect on authenthication speed when flashing many phones one by one
- Selftests routines improved (dynamic timeout)
- Multiple files can be now choosen upon Writing Certificates saved as "CRT" (Cyclone binary format)
- BB5 SP Locks now being parsed upon read out (blocks count, block content, etc)
- DCT4Plus partials with version 6.82 have now removed from supported UPP list ASIC ID "3168" which is not unlockable (for now) with rom 0600 to avoid destroyed phones (no signal), in case you will got message "Not supported UPP ID", but your phone SL area will be untouched and after flash it will still work.
- Blue screen of death fixed on some configurations
- After PM Write, Statistics added, so user can easily see how many PM Record written OK / NOT OK
- IMEI in "Credits" upon calculation is now checked for validity (last digit)
- Updated Message before using DCT4 RPL Credits - ASIC 11 takes 2 credits and rest 1 credit
- Main Nokia Firmware v1.03 avaiable, this changes:
-- TX2 Output pin is now constant (Service Pin 3) due to many mistakes on user side.
-- Flash write speed optimized, should be around 10% - 30% faster, especially on NAND-ONENAND phones. More optimizations to come.
-- Erase status is now signalized by USB (red) led.
-- Added support for WD2 CBUS BT Flashing
-- BB5 Booting Improved on some environments
-- RTOS Code Updated to 5.2.0
-- Microcode USB Stack is now Vista compatible
-- Removed blue screen of death problem on some XP configurations
-- Minor bugs, fixes, and improvments
- Versions snap
Installer v1.02
Main x86 Application v1.0.0.7396
x86 Memory Manager v4.92R2
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.08
Onboard Main Nokia Application v1.03
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.8.0
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)
DCT4 Unlock Patches v20090502
Communication Stack SSLv3-keys-06092008
Skin Stack v6.30

!! WHERE TO DOWNLOAD !!
Download Mirror 0 : http://rapidshare.com/files/228313546/Cycl...oxInstaller.exe (TRAFFIC SHARE Download - download without logging into Rapidshare Premium zone, free - no wait and limits)
Download Mirror 1 : http://www.cyclonebox.com/downloads/CycloneBoxInstaller.exe


** SOME NOTICES **

!! UPGRADE YOUR BOX FIRMWARE to version 1.03 !!
Of course we can't force you to do that, but you will loose some functionality (CBUS Flashing, UEM Reading, VISTA Support, etc).

!! UPGRADE YOUR BOX DRIVERS TO VERSION 1.0.0.4 !!
Drivers should be updated automatically after installation using DPInst, but who knows.

!! ABOUT INSTALLATION !!
You don't need to uninstall previous installation. Just install this version and It will automatically purge previous one (delete old drivers, loaders) and install just new one.


more to come in next week so stay tuned
Best regards,
CycloneBox Team

actualizacion 25/06/12

instalador v1.21
06/25/2012

- Nueva BB5 FBUS / USB Cargadores v12.08.00 Alta
- Productos de apoyo basados ​​en Qualcomm añadido (Lumia 800, 610, etc)
- Intermitente modo Normal es compatible
- Muerto en modo intermitente con el apoyo
- Degradar el apoyo
- Soporte para múltiples configuraciones de la CNT Qulacomm
- Soporte de borrado seguro Área de Usuario - esto tarda unos 15-25 minutos
- Información básica lea incluyendo la batería, etc información para los productos Lumia
- Variante de selección automática de productos Lumia
- Cruz-flash es compatible, si los partidos de hash de clave pública
- Después de conectar los productos en el modo Normal, los conductores de Zune debe estar instalado. Llévelos a C: \ Archivos de programa \ Cyclone Box \ Drivers \ ZuneDrivers
- Los conductores intermitentes se instalará de forma automática, sin embargo en algunos problemas que acabamos de instalarlos manualmente desde C: \ Archivos de programa \ Cyclone Box \ Drivers \ LumiaFlashing
- Botón Cancelar mejora
- Base de datos predeterminada SX4 actualizado, añadió 30 nuevos modelos
- Nokia Connectivity cables conductores actualizado a v7.1.78.0
- Cambios menores y correcciones de errores

Cyclone v1.0.1.684 Released, One-click FREE Simlock CS Repair for XGold213 Added!!
Hi to all,

Cyclone v1.0.1.684
- Added FIRST IN THE WORLD, FREE One-Click Contact Service repair for XGold213 Based Phones. No need to buy RPL! Just click, and in 1 second your CS will go (if CS cause is bad simlock, and reason of this is NCK reset by free softs).
- Memory fragmentation issues fixed during Lumia Flashing
- Cursor problems fixed
- XP Usb support partially fixed
- Minor changes and bugfixes

Just run Cyclone, and autoupdate will fetch new version automatically.

Join us on xxx: Cyclone Box | xxx

Best Regards,
Cyclone Box Team

Traduccion segun San Google:
Cyclone v1.0.1.684 Lanzamiento, con un solo clic GRATIS simlock Reparación CS para XGold213 Añadido!
Hola a todos,

Cyclone v1.0.1.684
- Se ha añadido PRIMERA EN EL MUNDO, SIN con un solo clic de reparación de servicio de contacto para los teléfonos basados ​​en XGold213. No es necesario comprar RPL! Basta con hacer clic, y en un segundo a su CS irán (si la causa de bloqueo de la SIM CS es malo, y la razón de esto es restablecer NCK por softs gratis).
- Los problemas de fragmentación de memoria fija durante el flasheo Lumia
- Los problemas del cursor fijo
- XP son compatibles con USB corregido parcialmente
- Cambios menores y correcciones de errores

Simplemente ejecute el Cyclone, y la actualización automática obtendrá la nueva versión de forma automática.

Únase a nosotros en xxx: Cyclone Box | xxx

Saludos cordiales,
Cyclone Box Team

27/06/2012
ciclón v1.0.1.684
- Se ha añadido PRIMERA EN EL MUNDO, SIN con un solo clic de reparación de servicio de contacto para los teléfonos basados ​​en XGold213. No es necesario comprar RPL! Basta con hacer clic, y en un segundo a su CS irán (si la causa de bloqueo de la SIM CS es malo, y la razón de esto es restablecer NCK por softs gratis).
- Los problemas de fragmentación de memoria fija durante el flasheo Lumia
- Los problemas del cursor fijo
- XP son compatibles con USB corregido parcialmente
- Cambios menores y correcciones de errores

Modelos soportados:
Asha 200 (RM-761)
Asha 200 (RM-762)
C1-01 (RM-607)
C1-01 (RM-608)
C1-02 (RM-643)
C1-02 (RM-644)
C2-00 (RM-704)
C2-02 (RM-692)
C2-02 (RM-693)
C2-05 (RM-724)
C2-05 (RM-725)
C2-03 (RM-702)
C2-06 (RM-702)
C2-07 (RM-692)
C2-08 (RM-702)
X2-02 (RM-694)
X2-05 (RM-772)

Simplemente ejecute el ciclón, y la actualización automática obtendrá la nueva versión de forma automática.

Cyclone v1.0.1.713 Released
Hi, New update for Cyclone Box is ready.

What's new ?

- USB Booting problem solved
- Improved XGold2 Security Repair
- Improved RAPUv1, RAPUv2 USB Booting
- Minor changes and bugfixes

Update will be fetched automatically.
BR,
Cyclone Team

28/06/2012
- Arranque USB problema resuelto
- Mejora de la Seguridad XGold2 Reparación
- Mejora de la RAPUv1, RAPUv2 Arranque USB
- Cambios menores y correcciones de errores

Cyclone Box Firmware v02.05 Released
Hi, firmware v02.05 for Cyclone Box is Released.

New MEPs added:

MEP-12599-004
MEP-12907-003
MEP-17568-004
MEP-24660-002
MEP-26490-001
MEP-26900-001
MEP-27501-002
MEP-27559-001
MEP-27561-001
MEP-29080-001
MEP-40488-001
MEP-46976-001

Stay tuned....

Best Regards,
Cyclone Box Team

Saludos. Enjoy

27.08.2012
iPhone IMEI check service is restored now. Service is not free anymore. Single check costs you 1 Cyclone Credit. Once you've checked your phone, data is cached on server and you can check it again for free. Example output:

[imei] => 013128003164559
[status] => Delivered
[carrier] => AT&T USA
[locked] => Yes
[created] => 1346098925
[delivered] => 1346098982
[details] => stdClass Object
[errorCode] =>
[serialNumber] => QR213MTGA4S
[productVersion] => 5.1
[countryCode] => US
[partDescription] => IPHONE 4 16GB BLACK
[appliedActivationPolicyID] => 52
[assetTag] =>
[futureDataA] =>
[futureDataB] =>
[ban] =>
[carrierCode] => AT&T USA
[contractStartDate] =>
[contractEndDate] =>
[deviceFamily] => iPhone
[firstUnbrickDate] => 1.334624276E+12
[initialActivationPolicyID] => 52
[lastRestoreDate] =>
[lastUnbrickDate] => 1.334625193E+12
[macAddress] => 6CC26B9B4E58
[nextTetherPolicyID] => 52
[unbricked] => 1
[unlockDate] =>
[unlocked] =>
[imeiNumber] => 013128003164559
[ctn] => 18329225876
[iccID] => 89014104243590399073
[formattedContractStartDate] =>
[formattedcontractEndDate] =>
[formattedFirstUnbrickDate] => 17/04/12
[formattedLastUnbrickDate] => 17/04/12
[formattedLastRestoreDate] =>
[formattedUnlockDate] =>
[initialActivationPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
[bluetoothMacAddress] => 6CC26B9B4E57
[nextTetherPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
[appliedActivationDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy

TRADUCCIÓN

Nueva Actualizacion

=====================
Installer v1.22
09.11.2012
=====================
- New CPU support added, XGold223 (Asha 308, Asha309)
- Supported operations: Write Flash, Read/Write Certificates, Read RPL, Write RPL, etc...
- Firmware v02.11 Released
- Lumia SmartTP® introduced, for testers only (can detect short-circuits between Lumia eMMC Points (MISO,MOSI,CLK,CS), GND, or VCC, it shows also link quality). Use on _POWERED OFF_ PCB! When connecting power, it can show FALSE status! Very helpful during soldering time.
- New BB5 Loaders Added
- Lumia USB Flashing improved
- Latest Blackberry MEPs added
- Improved flashing speed and NPC certs reading time
- Improved CBUS protocol handling (sometimes it wents out of synchronization)
- Fixed BSI spurious glitch problem with ~2.x firmware
- Fixed DCT4 booting problems
- Improved FBUS Local Mode entry
- XGold213xx certificates Backup Added (NPC,HWC,CCC,...)
- XGold213xx Full Flash chip dump to BIN added
- XGold213xx Low-level PMM dump added (can dump PM from dead mobile)
- XGold213xx Low-Level FILESYSTEM dump from dead mobiles added. This dumps full FAT16 user data partition to BIN file for further actions (analysis, recovery, forensics, ...)
- Minor changes and bugfixes

Notes about XGold 223 flashing: Switching to RAW mode is not supported (i.e. flashing from local/test mode, ROM will respons with empty public id (000000...) - very same story as with rapido). Battery reset needed, software will prompt you, but not always. Keep it noticed.

Notes about XGold 223 RPL: Readen RPL is not full RPL backup (missing crypted PM308 data). This phone is very TexasInstruments-Nokia like, but not really. Once loaders with assymetric key hack is not ready, you SHOULDN'T full erase your phone any way.

Installer v1.22
09.11.2012

descargar
http://www.karwos.hk/CycloneBoxInstaller.exe

Cyclone Box instalador v1.22 Fecha de lanzamiento
Hola, nueva actualización para Cyclone Box está listo.

=====================
instalador v1.22
09.11.2012
=====================
- Soporte de CPU ha añadido una nueva, XGold223 (Asha 308, Asha309)
- Las operaciones soportadas: Escribir Flash, lectura / escritura Certificados, Read RPL, Write RPL, etc ..
- Firmware v02.11 lanzamiento
- Lumia SmartTP ® presenta, para los probadores sólo (se puede detectar cortocircuitos entre Lumia Puntos máster Erasmus Mundus (MISO, MOSI, CLK, CS), GND, o VCC, muestra también la calidad del enlace). El uso en _POWERED PCB OFF_! Al conectar la alimentación, se puede mostrar el estado FALSO! Muy útil durante el tiempo de soldadura.
- Nuevos BB5 Cargadores de Alta
- Lumia USB Flashing mejorado
- Actividad de los diputados Blackberry añadido
- Mejora de la velocidad de parpadear y NPC tiempo de lectura certs
- Manejo mejorado protocolo CBUS (a veces Went de sincronización)
- Corregido el problema BSI fallo espurio con firmware 2.x ~
- Solucionados los problemas de arranque DCT4
- Mejora de la entrada FBUS modo local
- Copia de seguridad de los certificados XGold213xx Añadido (APN, HWC, CCC, ...)
- XGold213xx volcado completo de chips flash BIN añadido
- XGold213xx de bajo nivel de volcado PMM añadido (puede volcar PM muerto desde móvil)
- XGold213xx bajo nivel de volcado de sistema de archivos móviles muertas añadido. Esta vertederos de usuario completa FAT16 la partición de datos a un archivo BIN para futuras acciones (análisis, recuperación, análisis forense, ...)
- Cambios menores y correcciones de errores

Notas sobre XGold 223 intermitente: Cambiar al modo RAW no es compatible (es decir, el parpadeo desde el modo local / test, ROM se respons con id vacío público (000000 ...) - misma historia que con rapido). Reposición necesita batería, software le pedirá, pero no siempre. Que sea notado.

Notas sobre XGold 223 RPL: Readen RPL no es copia de seguridad completa RPL (faltante PM308 encriptado de datos). Este teléfono es muy TexasInstruments-como Nokia, pero en realidad no. Una vez que las cargadoras con corte asimétrico clave no está listo, usted no debe borrar por completo su teléfono ninguna manera.

Firmware v02.11 es obligatoria

http://www.karwos.hk/CycloneBoxInstaller.exe

Mensaje modificado por cellcentersps el Nov 10 2012, 10:09 AM

subo el archivo de la actualizacion a el servidor

intallus v1.22

=====================
Installer v1.22
10.07.2013
=====================
BIG BIG BREAKING NEWS !!!!
NAVIFIRM IS BACK !!!!
EXCLUSIVE FOR CYCLONE USERS ONLY !!!!
Just auto-update your Cyclone and NaviFirm tab will appear in Nokia Tool.
This is well-known tool to download Nokia firmwares.
It will automatically detect target folder (ProgramFiles\Nokia\Products,ProgramData, etc) no need to download and move any files !!
It will automatically detect already downloaded files !!
No more mess with Settings->Paths, if no Paths exists, Default Landing zone will be added!
All works directly from software, no need download 3rd party tools!
Just run, select Phone and Variant, Download and your variant will appear in DCT4/BB5/WP7 tab!!
All latest and oldest firmware avaiables - including Lumia 920, 925, 928, etc…
Stay tuned, more is JUST ahead corner!

solo para que vea como se actualiza el software es el mismo de la Publicacion: #153 anterior amigos

Mensaje modificado por mauro1988 el Jul 11 2013, 06:20 PM

Hi friends

Tropical Cyclone is going to be more and more worst Better keep your windows closed, as you don't know what may happen next days
NaviFirm database is updated at server side now, what's new?

RM-872 Asha 206, added 352 VARIANTS (100% WORLD'S FIRST)
RM-873 Asha 205, added 343 VARIANTS (100% WORLD'S FIRST)
RM-902 Asha 501, added 256 VARIANTS (big part of them WORLD'S FIRST)
RM-714 Asha 311, added 595 VARIATNS (big part of them WORLD'S FIRST)
RM-761 Asha 200, added 689 VARIANTS (big part of them WORLD'S FIRST)
RM-766 Asha 305, added 399 VARIANTS (part of them WORLD'S FIRST)
RM-768 Asha 306, added 55 VARIANTS (part of them WORLD'S FIRST)
RM-840 Asha 301, added 342 VARIANTS (VERY BIG part of them WORLD'S FIRST
RM-825 Lumia 820, added 4 WORLD'S FIRST VARIANTS (not avaiable on net)
RM-892 Lumia 925, added 17 WORLD'S FIRST VARIANTS (not avaiable on net)
RM-882 Lumia 720, added 17 WORLD'S FIRST VARIANTS (not avaiable on net)
RM-801 Lumia 800, added 276 VARIANTS (part of them not avaiable on net)
RM-821 Lumia 920, added 264 VARIANTS
RM-823 Lumia 900, added 1 VARIANT
RM-849 Lumia 610 NFC, added 14 VARIANTS
RM-835 Lumia 610, added 260 VARIANTS

Is server-side update only, database already on server!

Ps. some variants for really old phones (like 6630) may get not found on server (nokia deleted from Caresuite server), we will add DSUT and DSUT-INT server in next releases so they will get back.

Of course update IS FREE and suitable for:
- Cyclone Box
- Cyclone Box Reloaded
- Cyclone box NANO aka Cyclone Key

Best Regards,
Cyclone Team

Hi, NaviFirm database was updated, added 103 variants for Nokia Lumia 1020 (aka Nokia EOS).

This is again WORLD'S FIRST and EXCLUSIVE update only for CYCLONE USERS.

Variants List:

Quote:
RM-875 1PKB FI03 BTR Templ for Eos
RM-875 1PKB FI03 CTR Templ for Eos
RM-875 BTR BLACK ROW
RM-875 BTR YELLOW ROW
RM-875 BTR WHITE ROW
RM-875 CTR EURO R&D BLACK
RM-875 CTR EURO R&D YELLOW
RM-875 CTR EURO R&D WHITE
RM-875 NDT EURO1 BLACK
RM-875 CTR EURO R&D RED
RM-875 BTR RED ROW
RM-875 CTR FOR SW RELEASE PREP BLACK
RM-875 NDT EURO1 WHITE
RM-875 NDT EURO1 YELLOW
RM-875 NDT EURO1 RED
RM-875 1PKB TEMPLATE CTR
RM-875 VAR EURO GB EE SL BLACK
RM-875 VAR FR ORANGE SL BLACK
RM-875 VAR EU DE VODAFONE BLACK
RM-875 VAR EURO IT VODAFONE BLACK
RM-875 VAR EURO GB VODAFONE SL BLACK
RM-875 VAR EURO HU VODAFONE SL BLACK
RM-875 VAR EURO IE VODAFONE SL BLACK
RM-875 VAR IMEA EG LY AV BLACK
RM-875 VAR IMEA DZ MA TN AV BLACK
RM-875 VAR IMEA DZ MA TN AV WHITE
RM-875 VAR IMEA DZ MA TN AV YELLOW
RM-875 VAR IMEA EG LY AV WHITE
RM-875 VAR IMEA EG LY AV YELLOW
RM-875 VAR IMEA JO LB PS AV BLACK
RM-875 VAR IMEA JO LB PS AV WHITE
RM-875 VAR IMEA JO LB PS AV YELLOW
RM-875 VAR IMEA IN CV BLACK
RM-875 VAR IMEA IN CV YELLOW
RM-875 VAR IMEA IN CV WHITE
RM-875 VAR IMEA IN CV RED
RM-875 VAR EURO FI CV BLACK
RM-875 VAR EURO GB CV BLACK
RM-875 VAR EURO GB O2 SL BLACK
RM-875 VAR EURO CH SWISSCOM BLACK
RM-875 VAR EURO DE CV BLACK
RM-875 VAR EURO DE CV YELLOW
RM-875 BTR BLACK ROW KOM 64GB
RM-875 BTR WHITE ROW KOM 64GB
RM-875 BTR YELLOW ROW KOM 64GB
RM-875 CTR ROW KOM BLACK 64GB
RM-875 CTR ROW KOM WHITE 64GB
RM-875 CTR ROW KOM YELLOW 64GB
RM-875 VAR EURO DE CV WHITE
RM-875 1PNI TEMPLATE CTR ROW 64GB
RM-875 VAR LTA BR VIVO BLACK
RM-875 VAR LTA BR VIVO WHITE
RM-875 VAR APAC KH CV BLACK
RM-875 VAR APAC KH CV RED
RM-875 VAR APAC KH CV WHITE
RM-875 VAR APAC KH CV YELLOW
RM-875 NDT EURO1 BLACK CTR2BTR ENOSW
RM-875 VAR EURO FR CV BLACK
RM-875 VAR EURO FR CV WHITE
RM-875 VAR EURO FR CV YELLOW
RM-875 VAR EURO FR SFR SL BLACK
RM-875 VAR MVP LTA BLACK
RM-875 VAR APAC AU TELSTRA BLACK
RM-875 VAR APAC AU CV BLACK
RM-875 VAR APAC NZ TELECOM BLACK
RM-875 VAR EURO GB CV YELLOW
RM-875 VAR EURO GB CV WHITE
RM-875 VAR EURO NL CV BLACK
RM-875 VAR APAC VN CV BLACK
RM-875 VAR APAC VN CV WHITE
RM-875 VAR APAC VN CV YELLOW
RM-875 VAR APAC AU CV WHITE
RM-875 VAR APAC AU CV YELLOW
RM-875 VAR EURO NL CV WHITE
RM-875 VAR APAC SG CV BLACK
RM-875 VAR APAC SG CV WHITE
RM-875 VAR APAC SG CV YELLOW
PWBASSY RM-875 LIGHT SWAP PWB
PWBASSY RM-875 LIGHT SWAP ENGINE GLOBAL
RM-875 GLOBAL BLACK SWAP
RM-875 GLOBAL WHITE SWAP
RM-875 GLOBAL YELLOW SWAP
PWBASSY RM-875 64GB LIGHT SWAP PWB
PWBASSY RM-875 LS ENG TELEFONICA 64GB
RM-875 VAR EURO DE O2 POSTPAID BLACK
RM-875 VAR EURO DE O2 POSTPAID YELLOW
RM-875 TELEFONICA 64GB BLACK SWAP 64GB
RM-875 TELEFONICA 64GB WHITE SWAP
RM-875 TELEFONICA 64GB YELLOW SWAP
RM-875 VAR LTA BR CV BLACK
RM-875 ZA BLACK SWAP
RM-875 ZA WHITE SWAP
RM-875 ZA YELLOW SWAP
PWBASSY RM-875 LIGHT SWAP ENGINE PH
RM-875 VAR EURO GB H3G SL BLACK
RM-875 VAR EURO IT CV BLACK
RM-875 VAR EURO IT CV RED
RM-875 VAR EURO IT CV YELLOW
RM-875 VAR EURO IT CV WHITE
RM-875 VAR APAC HK CV BLACK
RM-875 VAR APAC HK CV YELLOW
RM-875 VAR APAC HK CV WHITE
RM-875 VAR EU DE TELEKOM BLACK
Enjoy BEST SUPPORT with Cyclone!

Angry Cyclone NO TP - USB ONLY Rooting for Lumia 800, 800C Released
Hi everyone

- Added WORLD FIRST, USB ONLY, NO TP ROOTING FOR RM-801 LUMIA 800
- Added WORLD FIRST, USB ONLY, NO TP ROOTING FOR RM-802 LUMIA 800C

All NOKIA DLOAD OSBL loaders are supported (even latest one!)

Instructions:
1. Run Cyclone, it will be auto-updated
2. Update your Box Firmware to v2.20
3. Go to WP7 -> Simlocks Tab
4. Select Product and click ROOT!

It should go this way:

Quote:
Lumia No TP Root Procedure Started...

If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode...
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2012-02-17 14:40:05
OSBL Bootloader Ready
USB&UART Tracing set
RSA Signature Calculated for QCB Boot, Writing...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2011-09-28 15:52:12
Signer S/N: 23
Signer User ID: 10046114
Auth Level: Care
Data Encryption: 0
Image Index: 0
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Certificate Accepted
[ASIC 0, Storage 4,1] Writing 850.552kB @ 0x000000000007D200
Write taken 0.358s (Average speed: 19462,61kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
Rooting Finished!
After rooting, Qualcomm Bootloader is installed. That means phone will be detected as Mass Storage Device, and you will have full access to eMMC.

Because patching is not good solution, we will add some good news aswell in next days

However, if you need simlock patching badly you can use some free tools around to patch AMSS (i.e. NSS).

Release Notes:
1. Supported products: Cyclone Box Classic, Cyclone Box Reloaded, Cyclone Key
2. Firmware Required v2.20
3. Need No TP Activation, is COMPLETLY FREE for all Cyclone Key users, for rest you need have 60 credits on your account and your box will be automatically activated (credits will not be withdrawn from box anyway, this is just threshold).
4. We also have solution to completly root rest of lumias, including 610, 610nfc, 900, etc... however it will be released ONLY if this solution WILL NOT BE COPIED. If somebody copy solution - it will be kept private.
5. No need new installer, however if you need one, always latest one is here: http://www.karwos.hk/CycloneBoxInstaller.exe

Best Regards,
Cyclone Team