Lg H700 Frp Aporte Opciones

[kkano]

Proceso de desbloqueo FRP LG-H700 con octoplus box
proceso realizado con servidor cuesta 100 creditos sale en dos minutos.

Welcome to Octoplus/Octopus Box LG Software version 3.0.8

--------------------------------------------------------------------------------
Connecting to server ...OK
--------------------------------------------------------------------------------
Work ID:
Checking data...OK
Platform: LG Qualcomm
Selected port: COM8
Selected model: H700
Please, put the phone into download mode manually (Power
phone OFF (reconnect battery), press and hold "Vol+" button and
connect the cable (or P999 cable)).
Reading info...
Model ID: LG-H700
IMEI:
Android version: 8.1.0
Battery level: 40%
Mode: Emergency
Initializing flash...OK
Platform: msm8937
SW version: LGH700AT-01-V20b-310-410-APR-30-2019-ARB00+0
Android version: 8.1.0
LAF Version: 1.1
Product ID: PT02S170524004233
IMEI: 354830-08-109012-0
Target operator: ATT
Hardware: rev_10
Reading partitions...OK
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username:
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance:
To perform "Reset FRP" operation you need to have 100 credits.
Backup saved to "H700_354830081090120_02-01-2021_17-53-
28.oct"
Reading partitions...OK
Prepairing for change protect status...
Reconnecting phone...OK
Initializing flash...OK
Removing write protection...
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Wait until phone power ON.
3. Complete all startup settings.
4. Power phone OFF and put it to Download mode.
5. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Note: If You will cancel operation or it wasn't completed full, the
device may not work properly.
The operation must be performed and completed according to
Software instructions!OK
Initializing flash...OK
Reading partitions...OK
Resetting FRP Lock...
Reading partitions...OK
Restore write protection...
Reconnecting phone...OK
Initializing flash...OK
Reconnecting phone...
Please, perform the following steps:
1. Disconnect cable.
2. Wait until phone power ON.
3. Complete all startup settings.
4. Power phone OFF and put it to Download mode.
5. Connect the cable then press "OK" button.
Note: If "Ok" button isn't active, then You should reconnect device!
Note: If You will cancel operation or it wasn't completed full, the
device may not work properly.
The operation must be performed and completed according to
Software instructions!OK
Initializing flash...OK
Reading partitions...OK
Resetting FRP lock successfully completed!
Performed by 3.0.8 Software version.

[Anunciante Autorizado]

[novato]

sale free en octoplus seleccionando el modelo k500n

[CiSco]

sale free en octoplus seleccionando el modelo k500n

saludos, alguien lo confirma?

[carlospulido]

saludos, alguien lo confirma?

confirmado!!!