Ffrp Samsung A20s Via Tspoint Con Umt Opciones

[luiselflaco]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.8
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM59)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.8
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [SDM450] 00002000
OPK_DATA : 410C7DA0D12D712BF8B64C638BCE8C582C626BF442B58877E7B24D0F7121C529
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM450_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK [69]
Reading Device Information...OK
Software : RP1A.200720.012.A207MUBS4CWF1, A207MUBS4CWF1 [Fri Jun 2 04:28:12 KST 2023]
Android Ver. : 11
Patch Level : 2023-05-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 10.4

[Anunciante Autorizado]

[motursa]

fabricando el cable EDL casero también sale y sin desarmar (vale la pena crear el cable EDL )

Nota: El Log del compañero que creo este hilo es de un A207m Binario 4