Unlock Alcatel 6002a Aporte Opciones

[elmasterttt]

antes solo soportaba frp, pero en esta version ya si esta disponible....
solo deben conectarlo apagado eligiendo su respectivo modelo y listo... cobrar bien....
adjunto log..

Using library Brom_DLL_v7.2116.0
Engine version 1.0.0.5950
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM4)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM4
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: ecb0402b6e4d101c6fe3e4ea22289497
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
BB ID: NzEyQ0M0NjVBRDI1QUE4NDEzQThERjM1QjNDNzVBMjQ=
HW_STORAGE_EMMC: 0x422201F4 0x6E697769 0x36FF1020 0xBF39FE88 [SIZE=0xE6AC00000]
IMEI1 [OTP 0000]: 35954...........................
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 6002A-2BRGDO11
USRDATA INFO: 0x1A5000000 SIZE: 0xCC14F8000


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:01

Log file saved to: LOG_13_10_2022_03_35_13.txt

[Anunciante Autorizado]

[elaci2burlao]

antes solo soportaba frp, pero en esta version ya si esta disponible....
solo deben conectarlo apagado eligiendo su respectivo modelo y listo... cobrar bien....
adjunto log..

Using library Brom_DLL_v7.2116.0
Engine version 1.0.0.5950
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM4)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM4
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: ecb0402b6e4d101c6fe3e4ea22289497
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
BB ID: NzEyQ0M0NjVBRDI1QUE4NDEzQThERjM1QjNDNzVBMjQ=
HW_STORAGE_EMMC: 0x422201F4 0x6E697769 0x36FF1020 0xBF39FE88 [SIZE=0xE6AC00000]
IMEI1 [OTP 0000]: 35954...........................
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 6002A-2BRGDO11
USRDATA INFO: 0x1A5000000 SIZE: 0xCC14F8000
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:01

Log file saved to: LOG_13_10_2022_03_35_13.txt

Que Box Usaste?

[RJmoviles GSM]

Con NCK, seleccionar:

0-by CPU

MT6761

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: 0-By CPU MT6761
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(8) : MediaTek USB Port (COM8)
[8] \\?\usb#vid_0e8d&pid_0003#5&8355e70&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6761 CPU code: 717 Target config: e7
***********************
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: true
Memory write authorization: true
Cmd 0xC8 blocked: true
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
[3d000]Dumping phone preloader.
Preloader: C:\ProgramData\Android_MTK_Backup_Folder\preloader_backup\preloader_cruze_lite.bin
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(8) : MediaTek USB Port (COM8)
[8] \\?\usb#vid_0e8d&pid_0003#5&8355e70&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6761 200 ca01
Using Algo 1.
Helio MT6761 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6761
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0xe6a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6ac00000 [57.668 GB]
[EMMC]FORMAT
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

[Malone69]

Con NCK, seleccionar:

0-by CPU

MT6761

Exe version: NCKBox AndroidMTK 3.0.3
Selected model: 0-By CPU MT6761
[auto]Action: Reset FRP
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(8) : MediaTek USB Port (COM8)
[8] \\?\usb#vid_0e8d&pid_0003#5&8355e70&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6761 CPU code: 717 Target config: e7
***********************
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: true
Memory write authorization: true
Cmd 0xC8 blocked: true
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
[3d000]Dumping phone preloader.
Preloader: C:\ProgramData\Android_MTK_Backup_Folder\preloader_backup\preloader_cruze_lite.bin
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(8) : MediaTek USB Port (COM8)
[8] \\?\usb#vid_0e8d&pid_0003#5&8355e70&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6761 200 ca01
Using Algo 1.
Helio MT6761 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6761
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: F4012242697769 : 000000000000000000
EMMC UA SIZE: 0xe6a000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6ac00000 [57.668 GB]
[EMMC]FORMAT
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

Este es para FRP con NCK?

[Dr. Octopus]

Este es para FRP con NCK?

FRP con NCK