Tablet Alcatel 8092 Frp Con Umt Opciones

[luciomunoz]

1.- dar click en la casilla Reset FRP y despues en execute
.2.- conectar la tablet apagada precionando los 2 botones de volumen
y listo

log:
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM50 [MediaTek USB Port (COM50)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&265d47d&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x8167, [MT8167/MT8516/MT8362] [Unknown]
Hardware Info: 0x8A00, 0xCB00, 0x01
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: 0E366BAE1851BAB13E1CB85F70079A7F
Preparing device...
-- Success!
Preloader saved as : preloader_t6730_p4mme_32b_220306_130806.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM50)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM52)
device path: \\?\usb#vid_0e8d&pid_2001#6&265d47d&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Platform : MT8167
Board : t6730_p4mme_32b
Platform : mt8167
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.8]