Alcatel 9029z Unlock Nck Box, (Aporte) Opciones

[jeizon03]

 Captura.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 191.2k ) Número de descargas: 0


Exe version: NCKBox AndroidMTK 2.9.5
Selected model: Alcatel OT-V720[MT6739]
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please connect phone in brom mode
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(11) : MediaTek USB Port_V1632 (COM11)
[11] \\?\usb#vid_0e8d&pid_0003#7&3386638&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6739 CPU code: 699 Target config: e7
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization true
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
Waiting clangsm for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(11) : MediaTek USB Port_V1632 (COM11)
USB\VID_0E8D&PID_0003\7&3386638&0&3
Detected(11) : MediaTek USB Port_V1632 (COM11)
[11] \\?\usb#vid_0e8d&pid_0003#7&3386638&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[14]META Port Detected: MediaTek USB VCOM (Android) (COM14)
USB\VID_0E8D&PID_200E&MI_01\8&EE58868&0&0001
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V65.2.P2
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: OTP
Phone imei[1] : 015608003
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[0]All done.

Mensaje modificado por LAB_SANTACRUZ el Jun 17 2021, 12:07 PM

Motivo de edición: suba las imagenes directas al servidor de clangsm, como archivos adjunto(no las suba a servidores externos por que las quitan y queda error de imagen cortada)

[Anunciante Autorizado]

[kiker07]

 Captura.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 191.2k ) Número de descargas: 0


Exe version: NCKBox AndroidMTK 2.9.5
Selected model: Alcatel OT-V720[MT6739]
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please connect phone in brom mode
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(11) : MediaTek USB Port_V1632 (COM11)
[11] \\?\usb#vid_0e8d&pid_0003#7&3386638&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6739 CPU code: 699 Target config: e7
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization true
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
Waiting clangsm for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(11) : MediaTek USB Port_V1632 (COM11)
USB\VID_0E8D&PID_0003\7&3386638&0&3
Detected(11) : MediaTek USB Port_V1632 (COM11)
[11] \\?\usb#vid_0e8d&pid_0003#7&3386638&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[14]META Port Detected: MediaTek USB VCOM (Android) (COM14)
USB\VID_0E8D&PID_200E&MI_01\8&EE58868&0&0001
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V65.2.P2
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: OTP
Phone imei[1] : 015608003
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[0]All done.

Amigo lo he intentado y me reconoce el puerto pero no inicia el proceso
Algún tip
Conectas con algún botón de volumen?

Mensaje modificado por LAB_SANTACRUZ el Dec 21 2021, 07:28 PM

Motivo de edición: Esta estrictamente prohibido escribir en mayúsculas, lea las reglas del foro. evite ser sancionado.

[santamaria010]

Amigo lo he intentado y me reconoce el puerto pero no inicia el proceso
Algún tip
Conectas con algún botón de volumen?

tilda bypas security

[JaimeU14]

Amigo lo he intentado y me reconoce el puerto pero no inicia el proceso
Algún tip
Conectas con algún botón de volumen?

Instala este driver y busca un video de como usarlo para parchar el puerto: libusb-win32-devel-filter-1.2.6.0

Fichero(s) Adjunto(s)

 libusb_w... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 601.09k ) Número de descargas: 33

 

[nguyen.ca]

 Captura.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 191.2k ) Número de descargas: 0


Exe version: NCKBox AndroidMTK 2.9.5
Selected model: Alcatel OT-V720[MT6739]
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please connect phone in brom mode
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(11) : MediaTek USB Port_V1632 (COM11)
[11] \\?\usb#vid_0e8d&pid_0003#7&3386638&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6739 CPU code: 699 Target config: e7
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization true
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
Waiting clangsm for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(11) : MediaTek USB Port_V1632 (COM11)
USB\VID_0E8D&PID_0003\7&3386638&0&3
Detected(11) : MediaTek USB Port_V1632 (COM11)
[11] \\?\usb#vid_0e8d&pid_0003#7&3386638&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[14]META Port Detected: MediaTek USB VCOM (Android) (COM14)
USB\VID_0E8D&PID_200E&MI_01\8&EE58868&0&0001
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V65.2.P2
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: OTP
Phone imei[1] : 015608003
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[0]All done.

Amigo podrias decirme que compañia era ese table alcatel tengo una aca de metropcs he probado de todas las maneras posibles y no hace el proceso correctamente

[turox88]

Tengo este error saben por que

Exe version: NCKDongle AndroidMTK 2.7.7
Selected model: Alcatel OT-9029W
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please connect phone in brom mode
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(30) : MediaTek USB Port (COM30)
[30] \\?\usb#vid_0e8d&pid_0003#6&276cb60a&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6739 CPU code: 699 Target config: e7
***********************
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: true
Memory write authorization: true
Cmd 0xC8 blocked: true
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
[1e200]Dumping phone preloader.
Preloader: C:\ProgramData\Android_MTK_Backup_Folder\preloader_backup\preloader_easytab84gtmo.bin
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(30) : MediaTek USB Port (COM30)
[30] \\?\usb#vid_0e8d&pid_0003#6&276cb60a&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000 [29.145 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(27) : MediaTek DA USB VCOM (Android) (COM27)
[27] \\?\usb#vid_0e8d&pid_2001#6&276cb60a&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Phone have OTP partition.
MODEL FROM PROINFO: 9029Z-2ATBUS7
SECRO FROM PROINFO: X5F0UP01CZ00
OTP IMEI: 015608004995646
Modem version: MOLY.LR12A.R3.MP.V65.2.P2
Starting alcatel helio Simlock, not disconnect phone untill done
[helio]Wait untill phone will start charging.
[0]All done.

[lma2212]

Tengo este error saben por que

Exe version: NCKDongle AndroidMTK 2.7.7
Selected model: Alcatel OT-9029W
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please connect phone in brom mode
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(30) : MediaTek USB Port (COM30)
[30] \\?\usb#vid_0e8d&pid_0003#6&276cb60a&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6739 CPU code: 699 Target config: e7
***********************
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: true
Memory write authorization: true
Cmd 0xC8 blocked: true
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
[1e200]Dumping phone preloader.
Preloader: C:\ProgramData\Android_MTK_Backup_Folder\preloader_backup\preloader_easytab84gtmo.bin
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(30) : MediaTek USB Port (COM30)
[30] \\?\usb#vid_0e8d&pid_0003#6&276cb60a&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6739 2 cb00
Using Algo 1.
Helio MT6739 phone detected, swithing to helio api
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6739
[1]Storage EMMC
Block size: 512
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000 [29.145 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(27) : MediaTek DA USB VCOM (Android) (COM27)
[27] \\?\usb#vid_0e8d&pid_2001#6&276cb60a&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Phone have OTP partition.
MODEL FROM PROINFO: 9029Z-2ATBUS7
SECRO FROM PROINFO: X5F0UP01CZ00
OTP IMEI: 015608004995646
Modem version: MOLY.LR12A.R3.MP.V65.2.P2
Starting alcatel helio Simlock, not disconnect phone untill done
[helio]Wait untill phone will start charging.
[0]All done.

que version de android tiene porque las android 10 me dan ese mismo error las android 9 se liberan sin problema

[JaimeU14]

que version de android tiene porque las android 10 me dan ese mismo error las android 9 se liberan sin problema

El mio tiene android 9 y tira el mismo error

[ffrizoben]

compañeros full con 3 intentos, en caso de no salir o de error en algunos intentos, apagar por completo esperar reposo de apagado de la tablet y volver a intentar
tablet con android 9

Exe version: NCKDongle AndroidMTK 2.7.5
Selected model: Alcatel OT-V720[MT6739]
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please connect phone in brom mode
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(10) : MediaTek USB Port (COM10)
[10] \\?\usb#vid_0e8d&pid_0003#6&6808702&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6739 CPU code: 699 Target config: e7
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization true
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(10) : MediaTek USB Port (COM10)
USB\VID_0E8D&PID_0003\6&6808702&0&1
Detected(10) : MediaTek USB Port (COM10)
[10] \\?\usb#vid_0e8d&pid_0003#6&6808702&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[77]META Port Detected: MediaTek USB VCOM (Android) (COM77)
USB\VID_0E8D&PID_200E&MI_01\7&67CF6A6&0&0001
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V65.2.P2
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: OTP
Phone imei[1] : 015608000669054
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[0]All done.

[criss1234]

estuve batallando toda la mañana pero salio.

Exe version: NCKBox AndroidMTK 2.9.5
Selected model: Alcatel OT-V720[MT6739]
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please connect phone in brom mode
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(19) : MediaTek USB Port (COM19)
[19] \\?\usb#vid_0e8d&pid_0003#6&1ba46697&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6739 CPU code: 699 Target config: e7
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization true
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
Waiting for handle to become active......
Reseived active handle repply from phone......
Booting phone
Detected(19) : MediaTek USB Port (COM19)
USB\VID_0E8D&PID_0003\6&1BA46697&0&4
Detected(19) : MediaTek USB Port (COM19)
[19] \\?\usb#vid_0e8d&pid_0003#6&1ba46697&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[22]META Port Detected: MediaTek USB VCOM (Android) (COM22)
USB\VID_0E8D&PID_200E&MI_01\7&14265691&0&0001
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V65.2.P2
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: OTP
Phone imei[1] : 015608004834944
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[0]All done.