Frp Logic L4t, (Aporte) Opciones

[beny753]

Algo simple con nck modulo spreadtrum
seleccionar procesador 9832e y conectar con volumen (-)
aca dejo el log.

Phone Storage: EMMC
EXE: NckBox Spreadtrum Module 1.7
SELECTED: SC9832E_EMMC
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM30)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TA0W83_23_11_28
[readed: 8 expected: 8200 ]
Read Error: 7E00840000FF7B7E0038
Removing frp, wait...
Format OK.
Wait untill phone restart.
Log saved:
C:\Users\HELIOS\Documents\spreadtrum_module\Saved_Logs\_erase_frp_10.txt
Total Time: 00:00:20
Done.

Mensaje modificado por beny753 el May 19 2021, 12:13 PM

[Anunciante Autorizado]

[abreum7491]

Algo simple con nck modulo spreadtrum
seleccionar procesador 9832e y conectar con volumen (-)
aca dejo el log.

Phone Storage: EMMC
EXE: NckBox Spreadtrum Module 1.7
SELECTED: SC9832E_EMMC
ACTION: Erase FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM30)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TA0W83_23_11_28
[readed: 8 expected: 8200 ]
Read Error: 7E00840000FF7B7E0038
Removing frp, wait...
Format OK.
Wait untill phone restart.
Log saved:
C:\Users\HELIOS\Documents\spreadtrum_module\Saved_Logs\_erase_frp_10.txt
Total Time: 00:00:20
Done.

desbloqueo también realizado.

ACTION: Direct Unlock
Detecting phone, wait...
Using connection mode 1
Detected: SCI USB2Serial (COM73)

Platform Version: MOCORTM_20A_W21.15.3_Debug
Project Version: sharklp
BASE Version: 4G_MODEM_20A_W21.15.3
HW Version: sc9832e_modem
04-14-2021 17:43:35
Build number: sp9832e_1h10_gofu-user 11 RP1A.201005.001 49320 release-keys
EMMC DDR SIZE :15.00 GB+2.00 GB
UID: e7bef7f7f4cdf0c3fee211fe23bf455b864cb3aac335f0ce027b8afc60e2c873

IMEI 1: 355255170381363
IMEI 2: 867400020316620
IMEI 3: 867400020316638
IMEI 4: 867400020316646
BT: 000000000000
WIFI: 000000000000
Reading simlock backup, wait....
Saved to: C:\Users\Cell Center\Documents\spreadtrum_module\diag_nvram_backup\sp9832e_1h10_gofu-user_11_RP1A_201005_001_49320_release-keys_355255170381363__diag_simlock_nvram_backup.tar

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 87083993
Sim 2 Unlock Code: 41023788
Warning, this is factory key, some opperators can modify factory key.
Unlock is supported for this phone
Writing simlock...
Writing simlock ok
Done.
Exe version: NckBox Spreadtrum Module 2.1.8
Log saved:
C:\Users\Cell Center\Documents\spreadtrum_module\Saved_Logs\sp9832e_1h10_gofu-user11RP1A_201005_00149320release-keys_355255170381363_diag_simlock_unlock.txt