Frp Zte V2020 Android 10 (aporte) |
Bienvenido, invitado ( Identificarse | Registrarse )
Frp Zte V2020 Android 10 (aporte) |
May 8 2021, 03:41 PM
Publicado:
#1
|
|
Miembro del Clan Grupo: Miembros Mensajes: 20 Agradecimientos: 98 Registrado: 29-June 19 Desde: Tehuacán, Puebla, México Miembro No.: 1,126,205 Pais: |
FRP comprobado en seguridad marzo 2021
Abrir Ultimate MTK (ocupé versión 4.2) pestaña MTK One Click Reset FRP conectar apagado y presionando las dos teclas de volumen Listo y a cobrar. log de operación Operation : MTK One Click Hold VOL UP + DOWN and connect USB Cable. Some phone may have different key combination for BROM mode. Waiting for device in BROM mode... Port: COM64 Port Name: MediaTek USB Port (COM64) Path: \\?\usb#vid_0e8d&pid_0003#6&385b64c&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73} Chipset: 0x0788, [MT6771] Hardware Info: 0x8A00, 0xCA00, 0x00 SecureBoot: True SLA: False DA Auth: False Disabling WatchDog... - Success Sending Payload data... - Payload sent Initiating Control Transfer... - Done Waiting for result... - Result: 0xA1A2A3A4 Disable Auth Success Waiting for Phone in Flash Mode... Connect Power Off phone within 30 secs... Port : MediaTek USB Port (COM64) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Syncing with Target... Reading Partition Table... Storage : eMMC Reading Device Information... Unable to read! Userdata is ENCRYPTED Seeking FRP Data... Resetting FRP... - Success! Disconnect Battery/Cable and Power On Phone. [UltimateMTK Ver. 4.2] |
|
|
A continuacion 3 usuario(s) le Agradece(n) a 2rod_jim por su Colaboracion: crazycrazy, glen1702, mvngo |
Anunciante Autorizado |
May 8 2021, 03:41 PM
Publicado:
#
|
Estas ofertas pudieran interesarte. |
|
|
|
May 21 2021, 02:07 PM
Publicado:
#2
|
|
Colaborador del Clan Grupo: Miembros Mensajes: 303 Agradecimientos: 1515 Registrado: 10-August 10 Desde: mexico Miembro No.: 124,036 |
tested el aporte, se conecta apagado y despues se presionan ls dos botones de volumen, en mi caso me pedia instalar el libusb filter para el driver mtk, y hasta que instale hizo el proceso
Operation : MTK One Click Hold VOL UP + DOWN and connect USB Cable. Some phone may have different key combination for BROM mode. Waiting for device in BROM mode... Port: COM7 Port Name: MediaTek PreLoader USB VCOM (Android) (COM7) Path: \\?\usb#vid_0e8d&pid_2000#5&9de363&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73} Preloader Mode Detected, Trying to crash... - Success! Port: COM26 Port Name: MediaTek USB Port (COM26) Path: \\?\usb#vid_0e8d&pid_0003#5&9de363&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73} Chipset: 0x0788, [MT6771] Hardware Info: 0x8A00, 0xCA00, 0x00 SecureBoot: True SLA: False DA Auth: False Disabling WatchDog... - Success Sending Payload data... - Payload sent Initiating Control Transfer... - Done Waiting for result... - Result: 0xA1A2A3A4 Disable Auth Success Waiting for Phone in Flash Mode... Connect Power Off phone within 30 secs... Port : MediaTek USB Port (COM26) Connected to BROM. Sending Download Agent... connect DA end stage: 2, enable DRAM in 1st DA: 0 Connected to Download Agent.. Syncing with Target... Reading Partition Table... Storage : eMMC Reading Device Information... Unable to read! Userdata is ENCRYPTED Seeking FRP Data... Resetting FRP... - Success! Disconnect Battery/Cable and Power On Phone. [UltimateMTK Ver. 4.2] -------------------- Z3x
Nck Pro Sigma Box Octoplus |
|
|
Sep 8 2021, 05:13 PM
Publicado:
#3
|
|
Miembro del Clan Grupo: Miembros Mensajes: 2 Agradecimientos: 0 Registrado: 14-October 20 Miembro No.: 1,193,216 Pais: |
100 % testeado
Mensaje modificado por celab el Sep 8 2021, 05:14 PM
Fichero(s) Adjunto(s)
20210908... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.37mb )
Número de descargas: 0
|
|
|
Ver Visitas | Fecha y Hora actual: 19th June 2024 - 09:20 PM |