Frp E Imei Hisense E30 Hlte220e (aporte) |
 |
|
Bienvenido, invitado ( Identificarse | Registrarse )
  |
Frp E Imei Hisense E30 Hlte220e (aporte) |
 Sep 26 2020, 01:50 AM
Publicado:
#1
|
|
 Colaborador del Clan  Grupo: Miembros Mensajes: 545 Agradecimientos: 950 Registrado: 4-May 09 Desde: edo de mex Miembro No.: 35,298  |
como lo dice el tema para hacer frp e imei a este modelito con nck escojiendo procesador mt6763 en segundos dejo log de la operacion
Phone detected...Please wait BBCHIP: 6763 1 ca01 Using Algo 3. Helio MT6763 phone detected, swithing to helio api Helio enabled DRAM in First Da: TRUE Sending loader..... BBCHIP MT6763 [1]Storage EMMC EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 8F010055593543 : 000000000000000000 EMMC UA SIZE: 0x750000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x750c00000 [29.262 GB] Modem version: MOLY.LR12A.R3.MP.V71.P4 Starting helio frp, not disconnect phone untill done [HELIO][frp]Format partition, please wait... [0]FRP Reset Done. [helio]Wait untill phone will start charging. [0]All done. Selected connection metod: Meta Connection Exe version: NCKDongle AndroidMTK 2.6.5 Selected phone: MT6763 Action : IMEI REPAIR. IMEI[1] for write : 8635XXXXXXXXXXXX Scanning for presents meta ports... Phone must be off with battery inside. Please insert USB cable now... In some phones need to keep VOL- button untill inserting USB cable. [4]Detected: MediaTek PreLoader USB VCOM (Android) (COM4) \\?\usb#vid_0e8d&pid_2000#5&1d961b3f&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [16]META Port Detected: MediaTek USB VCOM (Android) (COM16) USB\VID_0E8D&PID_2007\5&1D961B3F&0&4 Start sync target, waiting responce..... [AP]BaseBand CPU : mt6763 [AP]APP_VER: alps-mp-p0.mp7-V2.51_lentek.p0mp7.k57pv1.dm.64_P20 [mt6763]Using Algo 5 Making target channel configuration, wait... Making tunnel configuration, wait... Rebooting to meta, wait.... [META]BaseBand CPU : MT6763 [META]SW_VER : MOLY.LR12A.R3.MP.V71.P4 [META]HW_VER : TK_MD_BASIC_HW Meta mode conected ok, start reading phone.... IMEI to repair: [1] 8635xxxxxxxxxxx Phone imei[1] : 8635xxxxxxxxxxx Clean Boot flag ok. [helio]Wait untill phone will start charging. [0]All done. -------------------- “Sé paciente y no pretendas que llegue todo de inmediato”
|
 |
 
|
A continuacion 9 usuario(s) le Agradece(n) a CORCO17 por su Colaboracion: angelmayor, antonio97jc, Danoel11Alejand, glen1702, kekiman85, mario_brosh, Sabaga, sandraedwin, Ventoxlgb | |
| Anunciante Autorizado |
Sep 26 2020, 01:50 AM
Publicado:
#
|
 Estas ofertas pudieran interesarte. |
|
|
|
|
|
Oct 6 2020, 09:45 PM
Publicado:
#2
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 9 Agradecimientos: 0 Registrado: 26-March 16 Desde: USA Miembro No.: 811,833 Pais: 
|
hola que modulo ocupaste nck mtk o nck generico mtk
|
|
|
|
 Nov 8 2020, 01:50 AM
Publicado:
#3
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 4 Agradecimientos: 9 Registrado: 24-June 18 Miembro No.: 1,054,019 Pais: 
|
CITA(383r @ Oct 6 2020, 09:45 PM)  hola que modulo ocupaste nck mtk o nck generico mtk La reparacion de IMEI sale con NCK AndroidMTK, menu IMEI Utils Selected connection metod: Meta Connection(EXE API) Exe version: NCKBox AndroidMTK 2.9.2 Selected phone: MT6763 Action : IMEI REPAIR. IMEI[1] for write : XXXXXXXXXXXX Scanning for presents meta ports... Phone must be off with battery inside. Battery must be charged Please insert USB cable now... For some phones need to keep "VOL+ and VOL-" or "VOL-" button untill inserting USB cable. [4]Detected: MediaTek PreLoader USB VCOM (Android) (COM4) \\?\usb#vid_0e8d&_200sa0#6&195828333f&0&2#{a5dcXbf10-6530-11d2-901f-00ct04fb951ted} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [66]META Port Detected: MediaTek USB VCOM (Android) (COM66) USB\VID_0E8D&PID_2009\6&33F&0&2 ChipID: MT6763 [MT6763]Using Algo 5 Start sync target, waiting responce..... [META]BaseBand CPU : MT6763 [META]SW_VER : MOLY.LR12A.R3.MP.V71.P4 [META]HW_VER : TK_MD_BASIC_HW Meta mode conected ok, start reading phone.... IMEI to repair: [1] XXXXXXXXXXXXXX Phone imei[1] : XXXXXXXXXXXXX Clean Boot flag ok. [0]All done. |
|
|
|
A continuacion 3 usuario(s) le Agradece(n) a Sabaga por su Colaboracion: Geranevares, sandraedwin, TiradorCubano | |
 Jul 29 2021, 11:37 AM
Publicado:
#4
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 163 Agradecimientos: 175 Registrado: 17-May 09 Desde: Mexico Miembro No.: 37,517 |
Hola a todos, me llego este equipo Hisense E30 (mt6763) colgado en el logo, procedí a cargar software con el único disponible free en internet, el equipo encendió peo sin imei, intento restaurarlo con NCK pero me marca esto:
Selected connection metod: Meta Connection(EXE API) Exe version: NCKDongle AndroidMTK 2.7.6 Selected phone: MT6763 Action : IMEI REPAIR. Phone must be off with battery inside. Battery must be charged Please insert USB cable now... For some phones need to keep "VOL-" button untill inserting USB cable. For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable. For some phones need to keep "VOL+" button untill inserting USB cable. Detected(11) : MediaTek PreLoader USB VCOM (Android) (COM11) [11] \\?\usb#vid_0e8d&pid_2000#6&560257b&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [27]META Port Detected: MediaTek USB VCOM (Android) (COM27) USB\VID_0E8D&PID_2007\6&560257B&0&2 Start sync target, waiting responce..... ChipID: MT6763 [MT6763]Using Algo 5 Start sync target, waiting responce..... Rebooting to meta mode fail. [helio]Wait untill phone will start charging. [0]All done. Que sugerencias me pueden da ? Saludos ¡¡¡ |
|
|
|
|
Jul 29 2021, 11:45 AM
Publicado:
#5
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 96 Agradecimientos: 42 Registrado: 12-May 11 Desde: MARACAIBO Miembro No.: 209,837 |
CITA(tomywa @ Jul 29 2021, 12:37 PM) Hola a todos, me llego este equipo Hisense E30 (mt6763) colgado en el logo, procedí a cargar software con el único disponible free en internet, el equipo encendió peo sin imei, intento restaurarlo con NCK pero me marca esto: Selected connection metod: Meta Connection(EXE API) Exe version: NCKDongle AndroidMTK 2.7.6 Selected phone: MT6763 Action : IMEI REPAIR. Phone must be off with battery inside. Battery must be charged Please insert USB cable now... For some phones need to keep "VOL-" button untill inserting USB cable. For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable. For some phones need to keep "VOL+" button untill inserting USB cable. Detected(11) : MediaTek PreLoader USB VCOM (Android) (COM11) [11] \\?\usb#vid_0e8d&pid_2000#6&560257b&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [27]META Port Detected: MediaTek USB VCOM (Android) (COM27) USB\VID_0E8D&PID_2007\6&560257B&0&2 Start sync target, waiting responce..... ChipID: MT6763 [MT6763]Using Algo 5 Start sync target, waiting responce..... Rebooting to meta mode fail. [helio]Wait untill phone will start charging. [0]All done. Que sugerencias me pueden da ? Saludos ¡¡¡ tienes instalados los drivers meta? porque cuando queda asi es por drivers! |
|
|
|
|
Jul 29 2021, 12:05 PM
Publicado:
#6
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 163 Agradecimientos: 175 Registrado: 17-May 09 Desde: Mexico Miembro No.: 37,517 |
Si, hasta los reinstale, checa en el log que me los muestra igual que los anteriores compañeros.
|
|
|
|
|
Jul 29 2021, 01:20 PM
Publicado:
#7
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 163 Agradecimientos: 175 Registrado: 17-May 09 Desde: Mexico Miembro No.: 37,517 |
Desinstale todos los dives MTK con un programa, reinstale drivers manualmente y ya corrio bien, pero sigue sin IMEI.
Pienso entonces que lo que necesita es un backup de NVRAM, alguien que pueda apoyarme ? elected connection metod: Meta Connection(EXE API) Exe version: NCKDongle AndroidMTK 2.7.6 Selected phone: MT6763 Action : IMEI REPAIR. Phone must be off with battery inside. Battery must be charged Please insert USB cable now... For some phones need to keep "VOL-" button untill inserting USB cable. For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable. For some phones need to keep "VOL+" button untill inserting USB cable. Detected(55) : MediaTek PreLoader USB VCOM (Android) (COM55) [55] \\?\usb#vid_0e8d&pid_2000#6&560257b&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [56]META Port Detected: MediaTek USB VCOM (Android) (COM56) USB\VID_0E8D&PID_2007\6&560257B&0&2 Start sync target, waiting responce..... ChipID: MT6763 [MT6763]Using Algo 5 Start sync target, waiting responce..... [META]BaseBand CPU : MT6763 [META]SW_VER : MOLY.LR12A.R3.MP.V71.P4 [META]HW_VER : TK_MD_BASIC_HW Meta mode conected ok, start reading phone.... IMEI to repair: [1] 86350XXXXXXXXX Phone imei[1] : 863501XXXXXXXX Clean Boot flag ok. [0]All done. |
|
|
|
|
|
|
Fecha y Hora actual: 21st April 2026 - 04:49 PM |
