Aporte: Reparación De Imei De Un Zte Blade V2020 Vita Opciones

[intecel]

este equipo es procesador MTK Helio p60 8 núcleos 2.0G
abrimos modulo OTSmart_v1.0.0.5195_SEC_Edition de PACK 6
seleccionamos el modelo ZTE V Smart
ponemos el imei nuevo damos en conect y conectamos apagado el teléfono
y listo queda en pocos minutos aqui el log... sin creditos

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5195
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM8)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM8
Connecting;
Downloading DA;
Initializing;
Rid: 0b0c28425cfc03fb9a9bfdfb90622be2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6771 [CA00, 00, 6771, 00]
HW_STORAGE_EMMC: 0x44000145 0x32313441 0x461D0138 0x81C64064 [SIZE=0x1D20400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x17D800000 SIZE: 0x1B9D8F8000


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
Checking data;
NVRAM integrity check passed;
Formatting NVDATA partition now...
Done;

IMEI repaired; Remove battery and cable;

Time needed - 00:00:07

Mensaje modificado por intecel el Feb 25 2021, 09:16 PM

[Anunciante Autorizado]

[crismovile]

Yo tengo Furios desdehace mas de 10 años y con todaslas activaciones y jamas , de vdd los jamaces mea caido uno de los nuevos equipos para imei, pense que estaba obsoleta, pero veo que hace los nuevos modelos.
gracias por la info

Mensaje modificado por crismovile el Feb 26 2021, 12:47 AM

[jorgeups]

amigo disculpe y el proceso del imei v10 vita sabra???

[apunegro]

amigo disculpe y el proceso del imei v10 vita sabra???

buen dia, sale tambien con furious y usa 1 credito multi proposito... el proceso es sencillo.... seleccionas modelo, escribes imei a reparar, boton conet.. esperas un poco y conectas telefono apagado presionando volumen menos.. y solo esperas que finalice proceso.

saludos

[intecel]

amigo disculpe y el proceso del imei v10 vita sabra???

https://www.clangsm.com/forum/index.php?sho...p;#entry2017694

[Error495715]

También funciona en el ZTE Blade v2020 - z9000
Procesador MTK Helio p70 8 núcleos
Nivel de parche de seguridad
5 de marzo del 2021
Mismo proceso, en cuestión de minutos
Log: Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5201
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM8)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM8
Connecting;
Downloading DA;
Initializing;
Rid: 4d3c8d120cfa041fa3b6d82188ed78cc
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6771 [CA00, 00, 6771, 00]
HW_STORAGE_EMMC: 0x44000145 0x32313441 0x6A750138 0xE9C6405C [SIZE=0x1D20400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x131800000 SIZE: 0x1BE98F8000


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
Checking data;
NVRAM integrity check passed;
Formatting NVDATA partition now...
Done;

IMEI repaired; Remove battery and cable;

Time needed - 00:00:07

Log file saved to: LOG_24_05_2021_16_11_40.txt

Mensaje modificado por Error495715 el May 24 2021, 05:10 PM

Fichero(s) Adjunto(s)

 0.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 35.46k ) Número de descargas: 0
 1.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1.04mb ) Número de descargas: 0
 2.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1.75mb ) Número de descargas: 0
 3.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1.17mb ) Número de descargas: 0
 4.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1.14mb ) Número de descargas: 0

 

[poetsosa]

También funciona en el ZTE Blade v2020 - z9000
Procesador MTK Helio p70 8 núcleos
Nivel de parche de seguridad
5 de marzo del 2021
Mismo proceso, en cuestión de minutos
Log: Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5201
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM8)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM8
Connecting;
Downloading DA;
Initializing;
Rid: 4d3c8d120cfa041fa3b6d82188ed78cc
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6771 [CA00, 00, 6771, 00]
HW_STORAGE_EMMC: 0x44000145 0x32313441 0x6A750138 0xE9C6405C [SIZE=0x1D20400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x131800000 SIZE: 0x1BE98F8000
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
Checking data;
NVRAM integrity check passed;
Formatting NVDATA partition now...
Done;

IMEI repaired; Remove battery and cable;

Time needed - 00:00:07

Log file saved to: LOG_24_05_2021_16_11_40.txt

efectivamente sale tambien con furius modelo blade v smart , en mi caso 5 septiembre 2020

[whectorw]

ZTE 8000
Sin creditos con chimera en modo broom en el último paso tarda como tres minutos pero lo saca full

Mensaje modificado por whectorw el Nov 24 2021, 02:12 PM

[misa86]

este equipo es procesador MTK Helio p60 8 núcleos 2.0G
abrimos modulo OTSmart_v1.0.0.5195_SEC_Edition de PACK 6
seleccionamos el modelo ZTE V Smart
ponemos el imei nuevo damos en conect y conectamos apagado el teléfono
y listo queda en pocos minutos aqui el log... sin creditos

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5195
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM8)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM8
Connecting;
Downloading DA;
Initializing;
Rid: 0b0c28425cfc03fb9a9bfdfb90622be2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6771 [CA00, 00, 6771, 00]
HW_STORAGE_EMMC: 0x44000145 0x32313441 0x461D0138 0x81C64064 [SIZE=0x1D20400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x17D800000 SIZE: 0x1B9D8F8000
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
Checking data;
NVRAM integrity check passed;
Formatting NVDATA partition now...
Done;

IMEI repaired; Remove battery and cable;

Time needed - 00:00:07

con chimera activas depuracion
luego autodetectar funciones y listo lo mete a modo brom y reparas

saludos...

Mensaje modificado por misa86 el Mar 21 2022, 06:23 PM

[stylerecords]

Con pandora sale de una dejo log de operacion ....

No tiene el modelo vayan a zte y le ponen desconocido y trabajan normal saludos

Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x45010044413431323801C4476540C6E1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x45010044413431323801C4476540C6E1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000039000 (228.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Check A/B state... OK
Read product info... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE 9000
Product Name : P671F60
Product Device : P671F60
Product Board : peach
Board Platform : mt6771
Build ID : QP1A.190711.020
Build Date : Tue May 17 19:27:43 CST 2022
Display ID : TEL_MX_ZTE_9000V1.11
Security Patch : 2022-05-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 20220517.185836
Read partition "nvdata"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read IMEI... OK
IMEI: 8699440403116
Repairing IMEI...
IMEI: 86783 45976975
Write IMEI [NVDATA]... OK
Write IMEI [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security done!

Selected model: ZTE UNKNOWN
Operation: Repair
Software version: 3.10

[bieckolin]

dft tambien soporta seleccionando MEDIATEK Generic 2
de echo este no se pudo con pandora y aque no tenia radio frecuencia


Waiting for MTK port: 120
Driver Info: MediaTek Inc.
Driver version: 3.0.1512.0
Driver date: 1-4-2023
HW Chip: MT6771
HW version: ca00
SW version: 00
HW sub version: 8a00
SEC_CFG_SBC_EN: true
SEC_CFG_SLA_EN: false
SEC_CFG_DAA_EN: false
MEID: 0x415AEDDA3857AF6C1E9ACBB7D742074F
Preloader name: preloader_k71v1_64_bsp
Preloader version: 36
Send DA SYNC signal: OK
Setup device enviroment: OK
Receive DA SYNC signal: OK
USB_SPEED: HIGH-SPEED
Device mode: brom
Init EXT RAM: OK
Send 2nd DA : OK
INT_SRAM: 224.00 KB
EXT_RAM: 4.00 GB
EMMC_ID: DA4128
EMMC_CID: 4501004441343132380168735640C6E3
EMMC_BOOT1: 4.00 MB
EMMC_BOOT2: 4.00 MB
EMMC_RPMB: 16.00 MB
EMMC_USER: 116.48 GB
Reading device Info [EROFS]
Brand: ZTE
Model: ZTE 9000
Device: P671F60
Product name: P671F60_1
Manufacturer: ZTE
Android version: 10
Display ID: GEN_GLB_9000_V1.0
Android cpu: arm64-v8a
Incremental version: 20200724.155513
Security patch: 2020-07-05
Read data
Read data: OK
Encrypting IMEI: OK
Wipe security data: successful
Write security data: OK
New IMEIA: 768743643643544
New IMEIB: 768743643643544
Repair IMEI: successful
Operation time: 00:48
Operation: Finish 6.0.3.0