Alcatel 5029f Unlock Con Furios Opciones

[l.r.martinez]

1- elegir modulo OTSMART
2- conectar con vol abajo presionado
3 elegir modelo 5029A
4 - Esperar que conecte y darleunlock directo y 10 segundos y listo

log de prueba

earching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM11)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM11
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: bf28faad8e2b521852e0e01e9669ab2f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
HW_STORAGE_EMMC: 0x5500018F 0x53433659 0x21E01030 0xB7C608BE [SIZE=0xEA0C00000]
IMEI1 [OTP 0000]: 350879-01-021259-8
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5029F-2BRGDO11
USRDATA INFO: 0x193000000 SIZE: 0xD094FBE00


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
File not found;

Phone unlocked; Remove battery and cable;