N970u Bit5 Sprint Unlock Done!!! Opciones

[jahacruz]

hola compañeros realice la liberación N970u bit5
tuve que instalar este firmware: N970USQS5DTKA para que realizara la liberación


UNLOCK INSTRUCTIONS:
To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To unlock using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock SPR via Server NEW' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Unlock SPR via Server NEW
Selected model: SM-N970U
Software version: 42.1

Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N970U
Android version: 10
PDA version: N970USQS5DTKA
CSC version: N970UOYN5DTKA
Phone version: N970USQS5DTKA
Product code: SM-N970UZSASPR
CSC country code: USA
CSC sales code: SPR
Carrier ID: SPR
Phone SN: R58MA6N6F7V
IMEI: ...............
HW version: REV1.0
RF cal date: 2019.10.29
Chip name: SM8150
Modem board: SM8150
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: LOADED
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool... OK
Running zTool, please wait... OK
Checking network lock status... LOCKED
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Writing data to phone... OK
Checking network lock status... UNLOCKED
Debranding phone to XAA... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.42.1

Mensaje modificado por jahacruz el Feb 18 2021, 09:47 PM

[Vizard84]

Tengo un problema tengo el n970u en binario 4 y le di unlock por z3x y me da problemas el mío es de att se podrá cambiar la ROM o dejara desbloquearlo saludos

[Anunciante Autorizado]