Aporte Flash Blu C5 Plus C130eq Opciones

[jygcloud]

1.- conectar la nck y abrir el modulo nckdongle_sprd_module (la versión más reciente) probado con la 1.4
2.- elegir el modulo pac firmware flasher
3.- open pac file: elegir el archivo que descomprimen:  Flash_Bl... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 73bytes ) Número de descargas: 14

4.-flash phone
5.- conectar bateria, luego presionar "vol+"+ "vol-"+ "power" e inmediatamente conectar cables usb. listo a cobrar


EXE: NckDongle Spreadtrum Module 1.4
ACTION: Flash Firmware.
Selected firmware: BLU_C130EQ_V8.1.G.04.01_GENERIC_13-11-2019_0923.pac
NV: Default Mode (protect calibration)
Device Storage: EMMC
Detected: SPRD U2S Diag (COM3)
[00:00:00] Sending loader.
BOOT: SPRD3W
Sending loader, keep boot key untill loader start.
[00:00:06] Loader ok
[00:00:07] Wait for loader....
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
[00:00:07] First boot done.
[00:00:07] Sending second loader.
[00:00:14] Second loader sent ok.
New flash protocol detected.
[00:00:14] Reading: miscdata
[00:00:14] Reading: w_fixnv1
NVRAM saved to: C:\Users\Monchi\Documents\spreadtrum_module\spd_nvram_backup\_359856100209941\_359856100209941_nvram_backup.tar
[00:00:27] Start write: w_fixnv1
Protecting GSM_CALI_ITEM_ID id: 0x2
Protecting W_Calibration id: 0x12D
Protecting AFC id: 0x9C7
Protecting BlueTooth id: 0x191
Protecting BandSelect id: 0xD
Protecting WIFI id: 0x199
Protecting MMITest id: 0x19A
Protecting WIFICal1 id: 0x19F
Protecting WIFICal2 id: 0x1A0
Protecting WIFICal3 id: 0x1A1
[00:00:33] Start write: prodnv
[00:00:36] Format: uboot
[00:00:36] [uboot]Format OK.
[00:00:36] Format: uboot_log
[00:00:36] [uboot_log]Format OK.
[00:00:36] Start write: splloader
[00:00:36] Start write: vbmeta
[00:00:37] Start write: w_modem
[00:00:45] Start write: w_deltanv
[00:00:45] Start write: w_gdsp
[00:00:50] Start write: pm_sys
[00:00:50] Start write: gpsgl
[00:00:51] Start write: gpsbd
[00:00:52] Start write: wcnmodem
[00:00:52] Start write: boot
[00:01:07] Start write: recovery
[00:01:22] Start write: system
[00:10:19] Start write: customerdata
[00:10:21] Start write: userdata
[00:10:35] Start write: logo
[00:10:35] Start write: fbootlogo
[00:10:36] Start write: cache
[00:10:39] Start write: vendor
[00:11:44] Format: w_runtimenv1
[00:11:44] [w_runtimenv1]Format OK.
[00:11:44] Format: misc
[00:11:44] [misc]Format OK.
[00:11:44] Start write: trustos
[00:11:46] Start write: sml
[00:11:46] Start write: uboot
[00:11:47] Start write: persist
[00:11:48] Start write: fbootlogo3
[00:11:49] Start write: fbootlogo4
[00:11:49] Start write: fbootlogo5
[00:11:50] Start write: UDC_config
Flashing done.
Wait untill phone restart.
Log saved:
C:\Users\Monchi\Documents\spreadtrum_module\Saved_Logs\_writepac_.txt
Total Time: 00:11:51
Done.



Mensaje modificado por LAB_SANTACRUZ el Apr 12 2021, 10:57 AM

Motivo de edición: Esta estrictamente escribir en mayúsculas, así como link externos de descarga suba los archivos directamente al servidor de clangsm y no a un alojamiento externo.