Boot D390ar (securiti Booting Error ) (aporte) Opciones

[shakes]

hola colegas les traigo la solucion para d390ar boot cuando no entra en modo download

1. Seleccionan D390N por usb obvio
2. Sigue los pasos de coneccion de medusa pro con test point
3. smart repair
4. Flashear con firmware D390ar

dejo log

Model Settings:
Interface : USB
Brand : LG
Model : D390N
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D390N_USB.srf
Core : Qualcomm MSM8916
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_007050E1
Core : Qualcomm MSM8916
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
Connect successful.
---------------------------------------------------------------
SW: 1.3.0; FW: 1.15.
Reapairing from file "C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D390N_USB.srf".
Write data verification is enabled.
Writting GPT partition... Done.
Writting sbl1 partition... Done.
Writting tz partition... Done.
Writting hyp partition... Done.
Writting rpm partition... Done.
Writting aboot partition... Done.
Writting pad partition... Done.
Writting sbl1bak partition... Done.
Writting tzbak partition... Done.
Writting hypbak partition... Done.
Writting rpmbak partition... Done.
Writting abootbak partition... Done.
Writting misc partition... Done.
Writting persist partition... Done.
Writting metadata partition... Done.
Writting modemst1 partition... Done.
Writting modemst2 partition... Done.
Writting laf partition... Done.
Writting boot partition... Done.
Writting recovery partition... Done.
Writting fsg partition... Done.
Writting fsc partition... Done.
Writting ssd partition... Done.
Writting DDR partition... Done.
Writting sec partition... Done.
Writting encrypt partition... Done.
Writting eksst partition... Done.
Writting rct partition... Done.
Writting sns partition... Done.
Writting cust partition... Done.
Writting factory partition... Done.
Writting fota partition... Done.
Writting drm partition... Done.
Writting mpt partition... Done.
Writting modem partition... Done.

Smart Repair is successfully complete.
SW: 1.3.0; FW: 1.15.
Disconnected.


----------------------------------------------------------------------------------------



Welcome to Octoplus/Octopus Box LG Software version 2.5.7
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM302
Selected model: D390AR
Reading info...
Model ID: LG-D390n
IMEI: 355401-06-022069-7
Android version: 4.4.4
Battery level: 65%
SW Version: D390n10g
Mode: Emergency
Initializing flash...OK
SW version: LGD390nAT-00-V10g-EUR-XX-DEC-03-2014+0
Android version: 4.4.4
LAF Version: 1.0
Product ID: CT69S140913002539
IMEI: xxxxxxxxxxxxxxxxxxxxxxxx
Target operator: GLOBAL
Hardware: rev_11
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Opening "D390AR_V10a_01.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing PrimaryGPT...OK
Writing sbl1...OK
Writing tz...OK
Writing hyp...OK
Writing rpm...OK
Writing aboot...OK
Writing sbl1bak...OK
Writing tzbak...OK
Writing hypbak...OK
Writing rpmbak...OK
Writing abootbak...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing cust...OK
Writing factory...OK
Writing modem...OK
Writing system...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.5.7 Software version.


saludos espero que les sirva

agradezcan

[Anunciante Autorizado]

[elgalo]

hola colegas les traigo la solucion para d390ar boot cuando no entra en modo download

1. Seleccionan D390N por usb obvio
2. Sigue los pasos de coneccion de medusa pro con test point
3. smart repair
4. Flashear con firmware D390ar

dejo log

Model Settings:
Interface : USB
Brand : LG
Model : D390N
SRF : C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D390N_USB.srf
Core : Qualcomm MSM8916
Loader : QLoader_v1

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_007050E1
Core : Qualcomm MSM8916
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
Connect successful.
---------------------------------------------------------------
SW: 1.3.0; FW: 1.15.
Reapairing from file "C:/Program Files (x86)/Octoplus Pro JTAG Software/firmwareFolder/LG_D390N_USB.srf".
Write data verification is enabled.
Writting GPT partition... Done.
Writting sbl1 partition... Done.
Writting tz partition... Done.
Writting hyp partition... Done.
Writting rpm partition... Done.
Writting aboot partition... Done.
Writting pad partition... Done.
Writting sbl1bak partition... Done.
Writting tzbak partition... Done.
Writting hypbak partition... Done.
Writting rpmbak partition... Done.
Writting abootbak partition... Done.
Writting misc partition... Done.
Writting persist partition... Done.
Writting metadata partition... Done.
Writting modemst1 partition... Done.
Writting modemst2 partition... Done.
Writting laf partition... Done.
Writting boot partition... Done.
Writting recovery partition... Done.
Writting fsg partition... Done.
Writting fsc partition... Done.
Writting ssd partition... Done.
Writting DDR partition... Done.
Writting sec partition... Done.
Writting encrypt partition... Done.
Writting eksst partition... Done.
Writting rct partition... Done.
Writting sns partition... Done.
Writting cust partition... Done.
Writting factory partition... Done.
Writting fota partition... Done.
Writting drm partition... Done.
Writting mpt partition... Done.
Writting modem partition... Done.

Smart Repair is successfully complete.
SW: 1.3.0; FW: 1.15.
Disconnected.
----------------------------------------------------------------------------------------
Welcome to Octoplus/Octopus Box LG Software version 2.5.7
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM302
Selected model: D390AR
Reading info...
Model ID: LG-D390n
IMEI: 355401-06-022069-7
Android version: 4.4.4
Battery level: 65%
SW Version: D390n10g
Mode: Emergency
Initializing flash...OK
SW version: LGD390nAT-00-V10g-EUR-XX-DEC-03-2014+0
Android version: 4.4.4
LAF Version: 1.0
Product ID: CT69S140913002539
IMEI: xxxxxxxxxxxxxxxxxxxxxxxx
Target operator: GLOBAL
Hardware: rev_11
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Opening "D390AR_V10a_01.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing PrimaryGPT...OK
Writing sbl1...OK
Writing tz...OK
Writing hyp...OK
Writing rpm...OK
Writing aboot...OK
Writing sbl1bak...OK
Writing tzbak...OK
Writing hypbak...OK
Writing rpmbak...OK
Writing abootbak...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing cust...OK
Writing factory...OK
Writing modem...OK
Writing system...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.5.7 Software version.
saludos espero que les sirva

agradezcan

Saludos, podría proporcionar el diagrama de conexión

[zona]

Saludos, podría proporcionar el diagrama de conexión

Si te referís al Test Point es este.

Fichero(s) Adjunto(s)

 test_poi... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 170.58k ) Número de descargas: 0

 

[Freidel]

Puedes explicar mejor como hacer si es con meduza pro crack?

[rodrigo2016]

Puedes explicar mejor como hacer si es con meduza pro crack?

todo lo quieren solucionar con crack