Unlock A115m Bit2 Ultima Seguridad Opciones

[nic505]

UNLOCK INSTRUCTIONS:
To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-A115M
Software version: 43.16

Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-A115M
Android version: 11
PDA version: A115MUBU2BUE1
CSC version: A115MOWA2BUE2
Phone version: A115MUBU2BUE1
Product code: SM-A115MZBAPGU
CSC country code: Guatemala
CSC sales code: PGU
Carrier ID: PGU
Phone SN: R9JR401JLFJ
IMEI: 350578547311283
HW version: MP1.0
RF cal date: 2021.04.01
Chip name: SDM450
Modem board: SDM450
Security patch: 2021-04-01
SIM State: ABSENT
Checking saved data... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ no ] [ ok ] [ ok ] ... trying again
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM97
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM19 detected
Reading data from phone... OK
Searching data... [ ok ] [ ok ] [ ok ] ... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 36805303
NET lock: 72693140
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.43.16

el proceso es super dilatado alrededor de 1 hora pero al final sale, ojo usar esa copilacion..

[Anunciante Autorizado]

[LAB_SANTACRUZ]

evite ser sancionado:
Antes de plantear un tema use la opción buscar, esto ya fue discutido, dudas o comentarios dejo enlace para darle seguimiento al trabajo con este modelo.


Unlock A115m

Use siempre el buscador personalizado se encuentra en el encabezado de la misma página del foro

 buscador... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 200.17k ) Número de descargas: 0


(obtendrá mejores resultados de búsqueda)


Nota: no importa que sea otro binario u otro nivel de seguridad más alto, no vamos andar creando un tema diferente para cada nivel de seguridad ya que es el mismo modelo y misma herramienta usada.
Para siguientes ocasiones usted busque y si ve un tema abierto con las mismas características(mismo modelo) y herramientas usadas ahí responda haciendo hincapié que su aporte es para seguridad más altas
Reciba un cordial saludo.