Unlock Tablet Alcatel 9029z, Alguien Sabe Proceso ? (solucionado) Opciones

[jocasa]

alguien que haya sacado esta tablet Alcatel con la furious, que me indique como es el proceso ya que siempre me tira eror porfa


Using library Brom_DLL_v7.1813.3
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (Miracle USB Port (COM132))
Preparing to start meta mode;
ERROR: Failed to shakehand with the device;
ERROR: BOOT_PHONE;

Time needed - 00:00:34

Log file saved to: LOG_7_12_2019_19_48_24.txt

[Anunciante Autorizado]

[white69]

amigo primero ten seguro de tener la ultima actualizacion de otsmart y de los driver de la tablet cuando los tengas listos.
1-elige el modelo correcto de la tablet
2-cuando le des conectar en la nota que te da el programa de seguridad escoge NO
3-conecta la tablet apagada con el volumen- presionado y deja que la reconozca y haga su trabajo y listo no se tarda mucho y tableta desbloqueda.
4-solo inserta un chip de otra compania y prendela es todo.

se agradece con gusto.

aqui mi log

Using library Brom_DLL_v7.1813.3
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (MediaTek DA USB VCOM (Android) (COM10))
Preparing to start meta mode;
Requesting authorization;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip: MT6739
Sw version:
Hw Version: alps-mp-p0.mp1-V5.112_tcl.p0mp1.tb8765ap1.64.bsp_P1
Baseband Chip: MT6739
Sw version: MOLY.LR12A.R3.MP.V65.2.P2
Hw Version: TK_MD_BASIC_HW
Reading phone info;
IMEI 1: 01364
IMEI 2: N/A
Loading config;
Done;
Working;
Unlocking;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:36

[ermin1984]

amigo primero ten seguro de tener la ultima actualizacion de otsmart y de los driver de la tablet cuando los tengas listos.
1-elige el modelo correcto de la tablet
2-cuando le des conectar en la nota que te da el programa de seguridad escoge NO
3-conecta la tablet apagada con el volumen- presionado y deja que la reconozca y haga su trabajo y listo no se tarda mucho y tableta desbloqueda.
4-solo inserta un chip de otra compania y prendela es todo.

se agradece con gusto.

aqui mi log

Using library Brom_DLL_v7.1813.3
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (MediaTek DA USB VCOM (Android) (COM10))
Preparing to start meta mode;
Requesting authorization;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip: MT6739
Sw version:
Hw Version: alps-mp-p0.mp1-V5.112_tcl.p0mp1.tb8765ap1.64.bsp_P1
Baseband Chip: MT6739
Sw version: MOLY.LR12A.R3.MP.V65.2.P2
Hw Version: TK_MD_BASIC_HW
Reading phone info;
IMEI 1: 01364
IMEI 2: N/A
Loading config;
Done;
Working;
Unlocking;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:36

amigo estoy tratando de liberar una y en el modulo no me aparece ese modelo

[GSmaliel]

sigma aun no soporta este modelo, en la pagina web puedes ver la lista de modelos soportados.

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5195
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (MediaTek USB Port (COM39))
Preparing to start meta mode;
Requesting authorization;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip: MT6761
Sw version:
Hw Version: alps-mp-q0.mp1-V9.77_tct.tmo.q0mp1.k61v1.64.bsp_P8
Baseband Chip: MT6761
Sw version: MOLY.LR12A.R3.TC5.PR2.SP.V2.P9
Hw Version: TCT_TMO_Q0MP1_K61V1_64_BSP_HW
Reading phone info;
IMEI 1: 015774-00-224820-4
IMEI 2: 000000-00-000000-0
Working;
Unlocking;

Phone unlock failed;

Time needed - 00:00:41

Log file saved to: LOG_19_02_2021_15_30_17.txt
furious ya no lo saca al paceser

[white69]

es posible que sea tu baseband chip que es diferente al que hice, acabo de hacer otra sin problemas siempre con el mismo baseband chip

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5195
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (MediaTek USB Port (COM39))
Preparing to start meta mode;
Requesting authorization;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip: MT6761
Sw version:
Hw Version: alps-mp-q0.mp1-V9.77_tct.tmo.q0mp1.k61v1.64.bsp_P8
Baseband Chip: MT6761
Sw version: MOLY.LR12A.R3.TC5.PR2.SP.V2.P9
Hw Version: TCT_TMO_Q0MP1_K61V1_64_BSP_HW
Reading phone info;
IMEI 1: 015774-00-224820-4
IMEI 2: 000000-00-000000-0
Working;
Unlocking;

Phone unlock failed;

Time needed - 00:00:41

Log file saved to: LOG_19_02_2021_15_30_17.txt
furious ya no lo saca al paceser

Mensaje modificado por white69 el Mar 3 2021, 11:24 AM

Fichero(s) Adjunto(s)

 9029z.jp... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1.42mb ) Número de descargas: 0

 

[Comunicscell]

proceso hecho con la actualizacion.

Fichero(s) Adjunto(s)

 Alcatel_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 36.01k ) Número de descargas: 0

 

[tony17well]

proceso hecho con la actualizacion.

Ayuda, sabes si puedes hacer llamadas, la mia no trae la aplicacion de telefono, ya esta liberada.

[megared7]

Ayuda, sabes si puedes hacer llamadas, la mia no trae la aplicacion de telefono, ya esta liberada.

Bro, estás tabletas son para usar los datos del SIM, no para llamadas como tal. No trae la APP de llamadas por este motivo. El SIM es solo para datos LTE o 3G.

[freshcamell]

son diferente uno mt6739 y otra es mt6771 el mismo hacker quito el remover sim locks de la utima actualizacion ya que no esta soportado

[turox88]

Sacado de otro foro y me funciono

abrir nck android mtk
elegir marca Alcatel
elegir el modelo OT-720(MT6739)
marcar meta mode
dejar asi
abrir el programa mediatek bypass tool
oprimir bypass
tableth apagado oprimir bajar volumen y conectar
ya que lo reconozca el programa
desactivara la protección
ahora si
ir a nck oprimir unlock
cuando salga this can take up to 5 min on slow phones
desconectar y conectar
enseguida empieza a leeerlo y lo libera
listo
 NCK.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 1.1mb ) Número de descargas: 0

[Reparacel SA]

yo realice unlock a dicho modelo con la herramienta sim unlocker pro 7.5.2 solo consume 4 creditos y es rapido, activas opciones de desarrollador depuracion usb y desbloqueo de oem y clic en unlock, cabe aclarar que creo que funciona para datos moviles unicamente no vi la opción de llamada en la tablet y el cliente tenia prisa no pude ver mas a detalle, dejo el log.


Connect ADB Device [PJCEY5AMGAMFXGFU] : DONE
Model : 9032Z
Android Version : 10
Phone Sn : 0000000000
Security Patch : 2022-06-05
IMEI : 016095008544761
AP/CP Version : v1C74-0/MOLY.LR12A.R3.TC5.PR2.SP.V2.P9
Checking if Model Supported : OK
Operation : Direct Unlock
User Agreetments : OK
CHANGING TO MTK MODE
IF THE PHONE IS NOT AUTO DETECT PLEASE RECONNECT CABLE AND USE BOOT KEYS
Waiting for mtk usb device : ok
BootMode : [COM43]
USBDriver : wdm_usb:10.0.19041.1202:06/21/2006
Brom stage Re-configuration... : ok
Chipset : 0717:8A00:CA01:0200{MT6761}
Chipset ID : Helio A22
BR_MEID : 24145DB427BE13C2552E0722EA4525AC
SEC : {000000E7}[SBC:Yes:SLA:Yes:DAA:Yes]
SEC : {00000000}[SBC:No:SLA:No:DAA:No]
EMI Version : (MTK_BLOADER_INFO_v38)
Initialize Dram(0x200d0000) : Done
Sram : 228.00KB
Dram : 3.00GB
Storage : eMMC
CID : 150100445836384D42096607CC0D397D
eMMCID : DX68MB
Boot1 : 4.00MB
Boot1 : 4.00MB
Rpmb : 4.00MB
Userarea : 29.12GB
RNID : F8A70557C8C1E4AC14D31A5612BE96E0
ManfcID : TCL
Market Name : 9032Z
Product : ALCATEL
Firmware Ver : QP1A.190711.020 RELEASE-KEYS
Hardware Dev : APOLLO_8_4G_TMO
BuildID : QP1A.190711.020
Android : 10 (Quince Tart)
EMI ID : 9032Z
S Patch : 2022-06-05
Region : EN-US
CPUApi : ARMEABI-V7A
USB Conf : MTP
SVer : V1C74-0
Host : WSN3V25-SLAVE
Base : ANDROID-MTK
BT Addr : B4:69:5F:2D:07:5A
Mac Addr : B4:69:5F:2F:29:FC
Start Calculating... :
Step 1 : Done
Step 2 : Done
Step 3 : Done
#- upload security backup successfully
Generating Unlock Data : ok
Unlocking SLB... : Done
Unlocking SLB_B... : Done
Unlocking SLB_C... : Done
Rebooting device : Done
Network Unlock Successful! :
Saving Log[Logs/Unlock (2022_10_27 14.31.35).log] : DONE
Elapsed Time : (01:16)

Mensaje modificado por Reparacel SA el Oct 27 2022, 03:45 PM

[QFBosiris]

Con Pandora V 5.6 Sale de una
Alcatel Joy Tab 2
solo conectar apagada y listo a Cobrar

Selected model: Alcatel 9032Z (Alcatel Joy Tab 2)
Operation: Unlock network
Software version: 5.6
Work ID: 6129829

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD2D64B01, 0x0EB4094B, 0xF4229973, 0xBB9BCF99
Get Chip ID... [MT6761]
Get SOC ID... [07B0862FCD8AB6C4477CC896C700A646CC1E85DFE438EC3FFFB2652D342905B2]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445836384D42093924908569EB
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DX68MB
EMMC_ID : 0x150100445836384D42093924908569EB
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x00C0000000 (3,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Alcatel
Product Manufacturer : TCL
Product Model : 9032Z
Product Name : 9032Z
Product Device : Apollo_8_4G_TMO
Product Board : apollo84gtmo
Board Platform : MT6761
Build ID : QP1A.190711.020
Build Date : Thu Jul 21 20:25:16 CST 2022
Display ID : QP1A.190711.020 release-keys
Security Patch : 2022-07-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : v1C7A-0
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Read OTP... OK
Unlock... OK [DF1, DF2, SM]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

Fichero(s) Adjunto(s)

 Captura_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 246.08k ) Número de descargas: 1