Ayuda Con Frp A Huawei Chc-u03 Opciones

[Baphomet]

Hola a todos, hoy me ha llegado un Huawei CHC-U03 con cuenta google y no he logrado quitarla,

Log con chimera

Chimera Mobile Phone Utility version: 20.58.2014 @ 2019-03-24

Removing factory reset protection...
Collecting information about the device...
Removing factory reset protection lock...
It did not work.
Removing factory reset protection lock...
It did not work.
Checking if factory challenge needed...
Reading factory challenge...
Calculating response for the challenge...
This may take a while.
Be patient! Do NOT disconnect the phone!
Sending response to the device...
Checking if the factory challenge-response succeed...
Wiping device...
Looks like the FRP is not supported on this device. Please make sure this device supports factory reset protection.
Finished at local time: [03.24.19 11:44:46]
WorkID: 55492030

LOG con Sigma

SigmaKey v.2.30.02
239975866 Sigma dongle 2.30, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
--------- 2019-03-24 11:48:04 ---------
SigmaKey 2.30.02 MTK: Eliminar FRP
Modelo del teléfono: :CHC-U03
Versión: :CHC-U03 V100R001C605B060
Eliminando bloqueo FRP...No está soportado


LOG con Octoplus FRP

Welcome to Octoplus FRP Tool v.1.6.8.0
Platform: HUAWEI
Selected model: CHC-U03
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: :CHC-U03
Warning: Selected model (CHC-U03) differs from the detected one (:CHC-U03)!
If you want select (:CHC-U03) as (CHC-U03) model, please check "manual select".
Operation was failed!
Performed by 1.6.8.0 Software version.

LOG con comandos CMD

C:\Users\FRP>fastboot erase persist
erasing 'persist'...
FAILED (remote: Command not allowed)
finished. total time: 0.009s

Alguna idea de como remover el FRP, gracias de antemano.