Liberar Huawei P10 Lite Was-lx3 Con Ultimate Nck Huawei Module Opciones

[jeovannii]

hola les traigo otro pequeño aporte, una liberacion para un huawei p10 lte was-lx3

lo hice con el modulo de ultimate nak huawei

en mi opinión es una buena herramienta muy completa para huawei

estos son los pasos:

1. abrir modulo, y dar click en unlock

2. escribir este codigo en el telefono *#*#2846579#*#*

3. seguir estos pasos
ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode

4. verificar que los drivers esten instalados

5. dar click en read sim unlock codes, esperar

6. ingresar un chip diferente ala compañia

7. y escribir el primer código que dice NCK code en el movil

listo a cobrar

dejo mi log

2018-08-12 03:49:22.131 Autodetect COM port and phone type start!
2018-08-12 03:49:22.792 Found COM port: COM45
2018-08-12 03:49:22.794 Found phone type: Huawei Android phone (HiSilicon CPU)
2018-08-12 03:49:22.824 Open COM port COM45 (Android Adapter PCUI (COM45))...
2018-08-12 03:49:22.932 Start read phone info!
2018-08-12 03:49:22.946 Connecting to server...
2018-08-12 03:49:23.432 Connected!
2018-08-12 03:49:31.539 Waiting for server responce (up to 29 seconds left)...
2018-08-12 03:49:34.101 CP State: ready
2018-08-12 03:49:34.162 Read phone basic info...
2018-08-12 03:49:35.773 Read phone secure info...
2018-08-12 03:49:41.567 Read phone info done!

Model: WAS-L03
MEID: 00000000000000
pESN: 00000000
IMEI: 864065030502ooo
IMEI2: 000000000000000
IMEI3: 864065030502000
IMEISV: 65
Firmware ver.: System 5.1.0.78(0WUM)
SN: 6XT4C17608006342
PCB SN: 4C3YLS1769027244
WiFi MAC: C4:86:E9:1C:3B:1F
BlueTooth MAC: C4:86:E9:1C:43:54
Vendor: iusacell
Country: mx
FASTBOOT:Chipset-dallas 5.1.0.1(0OHM)_FASTBOOT
BOOT:Dallas-Trunk_BOOT
RECOVERY:(unknow)
SYSTEM:System 5.1.0.78(0WUM)
MAINVER:System 5.1.0.78(0WUM)
DATAVER:WAS-LX3C212B165_DATA_WAS-L03_iusacell_mx
APTIME:Mon May 14 12:16:51 CST 2018
RAM: 3G
eMMC: 32G
eMMC ID: 150100525831424D420614DAC6025400
HUN: 0000000000000000

IMEI 1 Sim Lock status:
NET: locked, unlock retry counts: unknown
NETSUB: unlocked
SP: unlocked

2018-08-12 03:49:41.725 Phone info data backup saved to file C:\Users\jeova\Documents\Tools\Android\BOX\nck\nck box ultimate huawei no borrar\Backup\20180812_034941_00000000000000.BAK


2018-08-12 03:49:50.152 Autodetect COM port and phone type start!
2018-08-12 03:49:52.807 Found COM port: COM45
2018-08-12 03:49:52.812 Found phone type: Huawei Android phone (HiSilicon CPU)
2018-08-12 03:49:53.002 Connecting to server...
2018-08-12 03:49:53.462 Connected!
2018-08-12 03:49:53.469 Open COM port COM45 (Android Adapter PCUI (COM45))...
2018-08-12 03:50:01.386 Waiting for server responce (up to 29 seconds left)...
2018-08-12 03:50:07.334 CP State: ready
2018-08-12 03:50:07.339 Read phone basic info...
2018-08-12 03:50:08.943 Read phone secure info...

2018-08-12 03:50:14.620 Phone info data backup saved to file C:\Users\jeova\Documents\Tools\Android\BOX\nck\nck box ultimate huawei no borrar\Backup\20180812_035014_00000000000000.BAK

2018-08-12 03:50:14.689 Read unlock codes start
2018-08-12 03:50:14.695 Phone secure identify start
2018-08-12 03:50:19.712 Phone secure identify success!
2018-08-12 03:50:24.664 Waiting for server responce (up to 27 seconds left)...
2018-08-12 03:50:28.622 Read unlock codes done!

NCK code = 2382248103909737
NET_SUB code = 5651082889356251
SP code = 7025784795020664
Unblok code = 1343976883048952

[Anunciante Autorizado]

[edgarcocodrilo1]

Hola podria indicarme si para usar este modulo hay que comprar activacion adicional o ya tendria que venir activo en NCK Dongle Pro+UMT

[LAB_SANTACRUZ]

Hola podria indicarme si para usar este modulo hay que comprar activacion adicional o ya tendria que venir activo en NCK Dongle Pro+UMT

efectivamente tiene que pagar esa activacion por aparte