ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

13 Páginas: V  « < 8 9 10 11 12 > »   
Closed TopicStart new topic
Unlock Real Lg Sp200
atek8404
mensaje Mar 22 2019, 09:07 AM
Publicado: #181

Miembro del Clan
*

Grupo: Miembros
Mensajes: 46
Agradecimientos: 57
Registrado: 1-March 18
Desde: Fomento
Miembro No.: 1,027,993
Pais:cu


CITA(lipon625 @ Mar 21 2019, 03:49 PM) *
tiene que degradarlo con el primer firmware que deja la pantalla desfazada, reparar imei y despues subir a la version nueva


Pregunta
El firmware que deja la pantalla desfasada es el SP20013b_to_X210ULMA10d_for_unlock.oc???


--------------------
______________________________
Mis herramientas hasta ahora...
Z3X, Octoplus, NCK, UMT, Smart Clip2, Medusa Pro2...

El principio de la sabiduría es el temor de Dios; Los insensatos desprecian la sabiduría y la enseñanza. Pr 1:7
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Mar 22 2019, 09:07 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
techiale
mensaje Mar 25 2019, 11:12 AM
Publicado: #182

Miembro del Clan
*

Grupo: Miembros
Mensajes: 16
Agradecimientos: 13
Registrado: 31-January 18
Desde: Venezuela
Miembro No.: 1,020,450
Pais:ve


CITA(albertojrb93 @ Oct 20 2018, 07:42 PM) *
hoy he hecho 4 equipos pero tengo un problema con 1, hizo todo el proceso bien pero. cuando termino de flashear se apago, y solo me conecta a la pc como Mediatek usb port alguna solucion?? se podra arreglar con sp flash tool??

hola amigo tengo uno igual lograste reparar el tuyo si pudiste como lo hiciste? el mio esta muerto no prende
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a techiale por su Colaboracion:
celumaster
celumaster
mensaje Mar 26 2019, 03:54 PM
Publicado: #183

Maestro del Clan
***

Grupo: Miembros
Mensajes: 1,059
Agradecimientos: 2763
Registrado: 25-July 10
Desde: HONDURAS
Miembro No.: 120,066



CITA(techiale @ Mar 25 2019, 10:12 AM) *
hola amigo tengo uno igual lograste reparar el tuyo si pudiste como lo hiciste? el mio esta muerto no prende


yo estoy igual, mi lg andaba la version 15a y ahora no enciende segun lei en el foro azul hay que reparar via emmc pero eso esta muy complicado, espero salga otra solucion alternativa ;(


--------------------
¡¡¡ Si Dios Conmigo, Quien Contra Mí ? !!!
Go to the top of the page
 
+Quote Post
antoniotx
mensaje Mar 28 2019, 11:29 AM
Publicado: #184

Miembro del Clan
*

Grupo: Miembros
Mensajes: 6
Agradecimientos: 0
Registrado: 1-August 12
Desde: Usa
Miembro No.: 369,437
Pais:ad


CITA(txtnet @ Nov 21 2018, 04:21 PM) *
alguien con solucion cuando dan error en el proceso de flash y se quedan en MTK y se desconectan y reconectan en admin dispositivos??

pudiste solucionar lo de el error mtk para poder pasar el software que tengo el mismo problema


--------------------
Go to the top of the page
 
+Quote Post
aljelisj
mensaje Apr 4 2019, 08:52 PM
Publicado: #185

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 325
Agradecimientos: 544
Registrado: 31-December 08
Desde: república dominicana
Miembro No.: 16,036



CITA(ElleLawliet @ Mar 5 2019, 02:01 AM) *
buenas.. os comento mi experencia, me llega un sp200 a con la pantalla frizada e imei generico, imagino por intentar liberarlo descargue dos rom y las escribi con lg up xq octo me daba error, ambas me lo dejaron igual

hasta q consegui esta: -- X210ULMA11a_00_NAO_US_OP_0921 --- esta soluciono la pantalla frizada pero tenia el equipo imei generico, no tenia el eprom e intente reparar me dio error todo.. consegui una eeprom de otro equipo e igual

solucione volviendo a instalar una rom q me lo dejara pantalla frizada y luego repare imei seleccionando el modelo sp200 en octoplus, de ahi todo ok. volvi a instalar la rom -- X210ULMA11a_00_NAO_US_OP_0921-- y Listo! funcionando!

PD: no se que version tenia xq me llego a pantalla frizada. cuando me llege uno desde cero reviso, libero y posteo!


con esto me funciono en la versión v15a.

nota: usar la version Octopus Box LG Software versión 2.8.9.5 eligen el modelo lmx210ma

Mensaje modificado por aljelisj el Apr 4 2019, 08:56 PM
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a aljelisj por su Colaboracion:
soportetec
luilezama
mensaje Apr 7 2019, 05:07 PM
Publicado: #186

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 304
Agradecimientos: 725
Registrado: 13-January 15
Desde: Yoro, Yoro HN
Miembro No.: 677,171



probado en uno con version 16d y salio al 100 siguiendo los pasos tal como le explica el colega arturo1971
con este archivo adjunto arriba; unlock_v13_14_15_SP20013b_to_X210ULMA10d.rar


Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a luilezama por su Colaboracion:
Arturo1971
cghond
mensaje Apr 8 2019, 06:38 PM
Publicado: #187

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 394
Agradecimientos: 380
Registrado: 28-March 16
Desde: Colonia Victoria
Miembro No.: 812,417
Pais:hn


hola alguien ha probado la solucion con la compilacion 17a


--------------------
Se que te gustó y aún no me atrevo
Dame una señal para perder el miedo
Go to the top of the page
 
+Quote Post
compañero15
mensaje Apr 14 2019, 09:12 AM
Publicado: #188

Miembro del Clan
*

Grupo: Miembros
Mensajes: 39
Agradecimientos: 27
Registrado: 5-May 15
Miembro No.: 714,582
Pais:cu


Colegas en los casos en el que z3x les dé error de laF la solución es sencilla primeramente hacer una salva de la Eeprom y luego con octoplus convertir el Firmware errando en el modelo sp200 y luego se convertido Flashear y de una encenderá se pone la salva de la Eeprom y a cobrar
DIOS LES BENDIGA !!!!
Go to the top of the page
 
+Quote Post
descaca159
mensaje Apr 17 2019, 11:41 PM
Publicado: #189

Miembro del Clan
*

Grupo: Miembros
Mensajes: 23
Agradecimientos: 36
Registrado: 18-June 14
Desde: Venezuela
Miembro No.: 612,322
Pais:ve


CITA(movilGSM @ Oct 20 2018, 03:01 PM) *
Hace un rato dsbloquee mi segundo SP200 y con permiso de Arturo1971 les digo como me funciona el proceso:

1- Flash con Z3X escogiendo el MS428. Se me queda en el logo mucho tiempo.
2- Flash con el LGUP que esta en el archivo a descargar. Verifica que esta en "Refurbish" Ya va a arrancar bien.
3- Reparar IMEI con Octopus con el modelo SP200 y listo.

Saludos

estuve buscando y testiando, estos pasos fueron los que me funcionaron con version 16d. saludos amigo!
Go to the top of the page
 
+Quote Post
chacaludg
mensaje Apr 22 2019, 08:07 AM
Publicado: #190

Miembro del Clan
*

Grupo: Miembros
Mensajes: 34
Agradecimientos: 72
Registrado: 22-September 17
Miembro No.: 989,073
Pais:cu


Les comento mi experiencia, ya que me daba este error:

LAF Error: 80000121.
Trying second method...Failed!
LAF Error: 80000118.

Primeramente salve el EEPROM con Octopus seleccionando el modelo SP200
Me someti a flashear la versiòn 11a del X210ULMA Con LG UP para convertirlo a x210ULMA y que no me quedara la pantala corrida, pero quedò con imei generico y no podìa escribir la salva del EEPROM me daba el error aqui el LOG:

Phone found at port COM104
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: LMX210ULMAAT-00-V11a-LAO-COM-SEP-21-2018-ARB00+0
LAF Version: 1.1
Product ID: 00000000000000000000000000000
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 350305-26-000000-1
MEID: 350305-26-000000
Bluetooth address: 00:05:C9:00:00:00
Wi-Fi MAC address: 00:00:00:00:00:00
SPC: 000000
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Opening "SP200_XXXXXXX_20-04-2019_14-13-12.eep"...OK
Writing EEPROM...
LAF Error: 80000121.
Trying second method...Failed!
LAF Error: 80000118.

Procedi a flashear con LG UP la versiòn X210ULMA10d.kdz seleccionando la pestaña CHIPERASE, luego hard reset para que inicie, sale la pantalla corrida y no funciona el tàctil, esperan por supuesto a que inicie, ponen el celular en modo download y escribir la salva del EEPROM
seleccionando el modelo SP200 aqui el log:

Phone found at port COM123
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: LMX210ULMAAT-00-V10d-LAO-COM-MAR-16-2018-ARB00+0
LAF Version: 1.1
Product ID: 00000000000000000000000000000
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 350305-26-000000-1
MEID: 350305-26-000000
Bluetooth address: 00:05:C9:00:00:00
Wi-Fi MAC address: 00:00:00:00:00:00
SPC: 000000
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...OK
Opening "SP200_35963409511298_16-04-2019_14-10-51.eep"...OK
Writing EEPROM...OK
EEPROM succesfully repaired.

Para finalizar hice hard reset, espere a que iniciara y para confirmar lo puse en modo Download y verifique que todo estaba bien, luego flashee la versiòn X210ULMA11a_00_NAO_US_OP_0921 con LG UP seleccionando la pestaña UPGRADE y listo, full señal y 100 % garantizado
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a chacaludg por su Colaboracion:
celular35, el_tingue
Pablo Velasqu
mensaje Apr 24 2019, 03:20 PM
Publicado: #191

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 391
Agradecimientos: 922
Registrado: 17-May 13
Desde: Venezuela Falcon
Miembro No.: 471,346
Pais:ve


cuento mi experiencia con un sp200 version
13a
primero hice backup a la eeprom
CITA
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM252
Mode: Emergency
Initializing flash...OK
Model ID: LG-SP200
Platform: mt6750
Android version: 7.1.2
SW version: SP20013a_02
LAF Version: 1.1
Product ID: VS01S180806006001
IMEI:
Target operator: SPR
Hardware: rev_10
Battery level: 50%
Reading partitions...OKOK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 359634-09-206502-1
MEID: 359634-09-206502
Bluetooth address: 00:57:C1:09:3B:AC
Wi-Fi MAC address: 00:57:C1:B1:B6:41
SPC: 965070
--------------------------------------------------------------------------------
Selecting output file...OK
Destination file: "SP200_35963409206502_24-04-2019_15-06-53.EEP"
Reading EEPROM...OK
Performed by 2.8.9.91 Software version.


solo cargue el fimware (LMX210ULMA10D) en kdz con lgup marcando la opcion erasechip

luego 3 wipe encendio
restaure eeprom
CITA
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM252
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: LMX210ULMAAT-00-V10d-LAO-COM-MAR-16-2018-ARB00+0
LAF Version: 1.1
Product ID: 00000000000000000000000000000
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OKOK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 350305-26-000000-1
MEID: 350305-26-000000
Bluetooth address: 00:05:C9:00:00:00
Wi-Fi MAC address: 00:00:00:00:00:00
SPC: 000000
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...OK
Opening "SP200_35963409206502_24-04-2019_15-06-53.eep"...OK
Writing EEPROM...OK
EEPROM succesfully repaired.
Performed by 2.8.9.91 Software version.


y listo sin problemas en tactil y touch



--------------------
Mis Herramientas
"Mxkey,Zzkey,Nck,UMT box,Gcprokey,ATF + JTAG,Infinity plus,GPG Dragon,Z3X box,Hua box, 4Se Box,Riff Box, Miracle box ,Asasam box ,Volcano
Box,Setool+ Lgtool,Octuplus,Spt Box,Sigma Box,Z3x Pro Easy Jtag,Chimera,EFT dongle,Furious Box"
Go to the top of the page
 
+Quote Post
Dragon_Russo23
mensaje Apr 24 2019, 04:34 PM
Publicado: #192

Miembro del Clan
*

Grupo: Miembros
Mensajes: 65
Agradecimientos: 147
Registrado: 2-October 17
Desde: Reynosa,Tamps
Miembro No.: 991,992
Pais:mx


Yo tenia un sp20011c y procedi a leer el eprom
de ahi quite bateria y meti de nuevo a download
le flasheae la rom SP20013b_to_X210ULMA10d_for_unlock_2.oct con el mismo modelo seleccionado sp200
al primer intento de flash se quedo en 7 prociento a la hora de llegar a system
y mi error fue desconectarlo y remover la bateria
ya que la tablilla no volvio a entrar a download a pesar de que se generaba el puerto octo no podia pasarle flash de nuevo
ya que estaba muerto
por suerte tenia una tablilla disponible del mismo modelo
pero en version 14c
asi que repeti todo y volvio a marcar error al 7 pociento de pasar el system
pero esta vez no lo desconecte ni retire la bateria
volvi a pinchar write firmware desde octo
esta vez se paro al 12 porciento de pasar el apartado system
y segui insitiendo y volvia a detenerse al 62 todo indicaba que solo era de insitir
volvi de nuevo a repetir la operacion y esta vez finalizo con exito
le di hard reset y espere a que iniciara
inicio y marco error de nvram en wifi
procedi a pasarle el eprom leido anteriormente y tomo señal al iniciar
pero el error nvram en wifi no se quito
sin embargo si tomaba la señal wifi y datos y llamadas


Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Opening "SP20013b_to_X210ULMA10d_for_unlock.oct"...OK
Setting options...OK
Reading partitions...OKOK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing preloader...OK
Writing pgpt...OK
Writing lk...OK
Writing lk2...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing logo...OK
Writing lo_bak_go...OK
Writing secro...OK
Writing tee1...OK
Writing tee2...OK
Writing rct...OK
Writing factory...OK
Writing efuse...OK
Writing md1img...OK
Writing md1dsp...OK
Writing md1arm7...OK
Writing md3img...OK
Writing system...Failed!
Performed by 2.8.9.8 Software version.
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Opening "SP20013b_to_X210ULMA10d_for_unlock.oct"...OK
Setting options...OK
Reading partitions...OKOK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing preloader...OK
Writing pgpt...OK
Writing lk...OK
Writing lk2...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing logo...OK
Writing lo_bak_go...OK
Writing secro...OK
Writing tee1...OK
Writing tee2...OK
Writing rct...OK
Writing factory...OK
Writing efuse...OK
Writing md1img...OK
Writing md1dsp...OK
Writing md1arm7...OK
Writing md3img...OK
Writing system...OK
Writing lafbak...OK
Writing sgpt...OK
Writing ftm...OK
Writing cache...OK
Writing OP...OK
Writing userdata...OK
Formating RCT...OK
Finalizing...OK
Performed by 2.8.9.8 Software version.
Checking data...OK
Platform: LG MTK
Selected port: COM6
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM77
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: LMX210ULMAAT-00-V10d-LAO-COM-MAR-16-2018-ARB00+0
LAF Version: 1.1
Product ID: 00000000000000000000000000000
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OKOK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 350305-26-000000-1
MEID: 350305-26-000000
Bluetooth address: 00:05:C9:00:00:00
Wi-Fi MAC address: 00:00:00:00:00:00
SPC: 000000
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...OK
Fixing IMEI A...
New IMEI A: 359634-09-160983-7
Reading security area...OK
Backup saved to "SP200_359634091609837_24-04-2019_15-48-15.EEP"
Patching security...OK
Writing security area...OK
Performed by 2.8.9.8 Software version.


Go to the top of the page
 
+Quote Post
frank1994
mensaje Apr 27 2019, 10:43 AM
Publicado: #193

Miembro del Clan
*

Grupo: Miembros
Mensajes: 3
Agradecimientos: 0
Registrado: 12-April 17
Miembro No.: 942,548
Pais:mx


Alguien sabe como habilitar las ocpiones de erase chpset en lg up?

Mi celular sp200 se queda reiniciandose y ya e instalado varias versiones de Lg up pero no me salen las opciones
como a ustedes.
Go to the top of the page
 
+Quote Post
yahancarlos
mensaje Apr 30 2019, 04:53 PM
Publicado: #194

Miembro del Clan
*

Grupo: Miembros
Mensajes: 12
Agradecimientos: 13
Registrado: 4-October 15
Miembro No.: 759,308
Pais:do


he solucionado el problema de pantalla movida.
cuando se queda en ese modo de pantalla movida solo reparen el imei original con octopus seleccionando el modelo sp200 y luego pasen este firmware con lgup
selecionando refurbish esperen a que termine y listo,celular trabajando nitido rolleyes.gif rolleyes.gif graxxx
Go to the top of the page
 
+Quote Post
Dr Phone´s
mensaje May 3 2019, 11:58 AM
Publicado: #195

Miembro del Clan
*

Grupo: Miembros
Mensajes: 104
Agradecimientos: 242
Registrado: 19-June 18
Miembro No.: 1,053,008
Pais:gt


Alguien a testeado version 17a?
Go to the top of the page
 
+Quote Post
randolfotecnicom
mensaje May 6 2019, 09:43 AM
Publicado: #196

Maestro del Clan
***

Grupo: Miembros
Mensajes: 789
Agradecimientos: 1237
Registrado: 15-November 08
Desde: Guatemala
Miembro No.: 11,712
Pais:gt


CITA(takeshi0o @ Jan 19 2019, 03:27 PM) *
procedimiento exitoso version 15A metodo simplificado si estoy mal me corrigen pero asi es como me salio

1.habilitar oem y entrar en modo download
2.con LGUPU.EXE seleccionar chip erase y comenzar la instalacion. utilize el archivo llamado sp200.kdz
3.el telefono se quedara en K8 hacer hard reset y entrara normal.
4.volver habilitar oem y para los que solo contamos z3x volvemos a reparar imei ya que el proceso lo borra seleccionando modelo m320 en modo download.
ejecutar setUser.bat y setDev.bat como administrador ambos y luego instala LGUPFRAME


9% error, siempre me da ese error , y con octoplus no se deja meter firmware
Go to the top of the page
 
+Quote Post
worconmex
mensaje May 7 2019, 12:23 PM
Publicado: #197

Miembro del Clan
*

Grupo: Miembros
Mensajes: 20
Agradecimientos: 3
Registrado: 7-September 17
Miembro No.: 985,102
Pais:mx


Inntenté el procedimiento al pie de la letra, pero el teléfono no inicia, ya le cargué varias Rom's y nada, se queda en el logo, deje el telefono 2 horas así y no inicia nunca. Entra a modo download, incluso al recovery pero nunca inicia... Intente recuperar con LGUP pero siempre se detiene la aplicación, no me funciona. ¿que puedo hacer?

Mensaje modificado por worconmex el May 7 2019, 12:24 PM
Go to the top of the page
 
+Quote Post
tensiwall
mensaje May 7 2019, 03:33 PM
Publicado: #198

Miembro del Clan
*

Grupo: Miembros
Mensajes: 2
Agradecimientos: 0
Registrado: 21-April 19
Miembro No.: 1,113,200
Pais:mx


hiciste algun hard reset..?
Go to the top of the page
 
+Quote Post
Dr Phone´s
mensaje May 8 2019, 02:58 PM
Publicado: #199

Miembro del Clan
*

Grupo: Miembros
Mensajes: 104
Agradecimientos: 242
Registrado: 19-June 18
Miembro No.: 1,053,008
Pais:gt


CITA(Dr Phone´s @ May 3 2019, 10:58 AM) *
Alguien a testeado version 17a?


Version 17a Testeado

https://www.clangsm.com/forum/index.php?sho...=521892&hl=
Go to the top of the page
 
+Quote Post
movilGSM
mensaje May 9 2019, 11:39 AM
Publicado: #200

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 384
Agradecimientos: 381
Registrado: 10-June 12
Desde: Cardenas, Cuba
Miembro No.: 349,535
Pais:cu


CITA(Arturo1971 @ Oct 19 2018, 06:06 PM) *
les subo imagenes y el proseso ,
1ro salva de epron con octopus selecionando medelo sp200
2do flash firware usando z3x seleccionando modelo ms428 al terminar de flash se demora en iniciar ,cuando inicie hand reset vol- + power
3ro reparar imei con octopus selecionando modelo sp200
4to hand reset otra vez
5to valoren su trabajo que esta solucion NO esta disponible en ningun forum...porque aqui lo que habia era bla,bla,bla
OJO: Para las versiones de firmware 13 14 y 15 testeado con octopus flash escogiendo ya el mismo modelo sp200 sin reinicio y sin defazar pantalla usar esta flash >> [attachment=306319:unlock_v...0ULMA10d.rar]



Brother despues de 4 horas bajando el firmware cuando se lo voy a flashear al movil la octopus de un error y murio! Ya no entra en modo download. Es un SP200 con la 14C. De madre!!

CÓDIGO
Log file "C:\Program Files (x86)\Octoplus\Octoplus_LG\LOG9-05-2019_12-08-20.log" created.
5/9/2019 12:08:24 PM > Searching for server...
5/9/2019 12:08:27 PM > Trying to ping server...
5/9/2019 12:08:27 PM > The necessary server was not found!
5/9/2019 12:08:28 PM > Welcome to Octoplus/Octopus Box LG Software version 2.9.2
5/9/2019 12:08:38 PM > --------------------------------------------------------------------------------
5/9/2019 12:08:38 PM > Checking data...5/9/2019 12:08:39 PM > OK
5/9/2019 12:08:39 PM > Platform: LG MTK
5/9/2019 12:08:39 PM > Selected port:
5/9/2019 12:08:39 PM > Selected baudrate: 921600
5/9/2019 12:08:39 PM > Selected model: SP200
5/9/2019 12:08:39 PM > Selected USB connection type
5/9/2019 12:08:40 PM > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
5/9/2019 12:08:40 PM > or
5/9/2019 12:08:40 PM > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
5/9/2019 12:08:46 PM > Phone found at port COM36
5/9/2019 12:08:50 PM > Mode: Emergency
5/9/2019 12:08:50 PM > Initializing flash...5/9/2019 12:08:52 PM > OK
5/9/2019 12:08:53 PM > Model ID: LG-SP200
5/9/2019 12:08:53 PM > Platform: mt6750
5/9/2019 12:08:53 PM > Android version: 7.1.2
5/9/2019 12:08:53 PM > SW version: SP20014c_00
5/9/2019 12:08:53 PM > LAF Version: 1.1
5/9/2019 12:08:53 PM > Product ID: VP01S180928004735
5/9/2019 12:08:53 PM > IMEI:
5/9/2019 12:08:53 PM > Target operator: SPR
5/9/2019 12:08:53 PM > Hardware: rev_10
5/9/2019 12:08:53 PM > Battery level: 50%
5/9/2019 12:08:53 PM > Reading partitions...5/9/2019 12:08:53 PM > OK
5/9/2019 12:08:55 PM > Checking security...
5/9/2019 12:08:55 PM > offs: 00380000
5/9/2019 12:08:55 PM > Read 00380000...
5/9/2019 12:08:55 PM > Checking security passed!
5/9/2019 12:08:55 PM > --------------------------------------------------------------------------------
5/9/2019 12:08:55 PM > IMEI: 359634-09-491719-5
5/9/2019 12:08:55 PM > MEID: 359634-09-491719
5/9/2019 12:08:55 PM > Bluetooth address: 00:57:C1:67:C0:CA
5/9/2019 12:08:55 PM > Wi-Fi MAC address: 38:30:F9:11:D7:D0
5/9/2019 12:08:55 PM > SPC: 718870
5/9/2019 12:08:55 PM > --------------------------------------------------------------------------------
5/9/2019 12:08:55 PM > Selecting output file...5/9/2019 12:08:57 PM > OK
5/9/2019 12:08:57 PM > Destination file: "SP200_35963409491719_09-05-2019_12-08-55.EEP"
5/9/2019 12:08:57 PM > Reading EEPROM...5/9/2019 12:08:57 PM > OK
5/9/2019 12:08:57 PM > Performed by 2.9.2 Software version.
5/9/2019 12:08:57 PM > Elapsed Time: 12:00:18 AM
5/9/2019 12:09:04 PM > --------------------------------------------------------------------------------
5/9/2019 12:09:04 PM > Checking data...5/9/2019 12:09:05 PM > OK
5/9/2019 12:09:05 PM > Platform: LG MTK
5/9/2019 12:09:05 PM > Selected port:
5/9/2019 12:09:05 PM > Selected baudrate: 921600
5/9/2019 12:09:05 PM > Selected model: SP200
5/9/2019 12:09:05 PM > Selected USB connection type
5/9/2019 12:09:06 PM > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
5/9/2019 12:09:06 PM > or
5/9/2019 12:09:06 PM > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
5/9/2019 12:09:11 PM > Phone found at port COM36
5/9/2019 12:09:15 PM > Mode: Emergency
5/9/2019 12:09:15 PM > Initializing flash...5/9/2019 12:09:17 PM > OK
5/9/2019 12:09:18 PM > Model ID: LG-SP200
5/9/2019 12:09:18 PM > Platform: mt6750
5/9/2019 12:09:18 PM > Android version: 7.1.2
5/9/2019 12:09:18 PM > SW version: SP20014c_00
5/9/2019 12:09:18 PM > LAF Version: 1.1
5/9/2019 12:09:18 PM > Product ID: VP01S180928004735
5/9/2019 12:09:18 PM > IMEI:
5/9/2019 12:09:18 PM > Target operator: SPR
5/9/2019 12:09:18 PM > Hardware: rev_10
5/9/2019 12:09:18 PM > Battery level: 50%
5/9/2019 12:09:18 PM > Reading partitions...5/9/2019 12:09:18 PM > OK
5/9/2019 12:09:20 PM > Checking security...
5/9/2019 12:09:20 PM > offs: 00380000
5/9/2019 12:09:20 PM > Read 00380000...
5/9/2019 12:09:21 PM > Checking security passed!
5/9/2019 12:09:21 PM > --------------------------------------------------------------------------------
5/9/2019 12:09:21 PM > IMEI: 359634-09-491719-5
5/9/2019 12:09:21 PM > MEID: 359634-09-491719
5/9/2019 12:09:21 PM > Bluetooth address: 00:57:C1:67:C0:CA
5/9/2019 12:09:21 PM > Wi-Fi MAC address: 38:30:F9:11:D7:D0
5/9/2019 12:09:21 PM > SPC: 718870
5/9/2019 12:09:21 PM > --------------------------------------------------------------------------------
5/9/2019 12:09:21 PM > Reading security area...5/9/2019 12:09:21 PM > OK
5/9/2019 12:09:21 PM > Backup saved to "SP200_359634094917195_09-05-2019_12-09-21.EEP"
5/9/2019 12:09:21 PM > --------------------------------------------------------------------------------
5/9/2019 12:09:21 PM > Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
5/9/2019 12:09:21 PM > --------------------------------------------------------------------------------
5/9/2019 12:09:23 PM > Opening "SP20013b_to_X210ULMA10d_for_unlock_v13,14,15.oct"...5/9/2019 12:09:23 PM > OK
5/9/2019 12:09:23 PM > Setting options...5/9/2019 12:09:25 PM > OK
5/9/2019 12:09:25 PM > Selecting firmware partitions...5/9/2019 12:09:59 PM > OK
5/9/2019 12:09:59 PM > Selected default partitions!
5/9/2019 12:09:59 PM > Reading partitions...5/9/2019 12:09:59 PM > OK
5/9/2019 12:09:59 PM > Do you want to format User Data?
5/9/2019 12:10:02 PM > Formating USERDATA...5/9/2019 12:10:06 PM > OK
5/9/2019 12:10:06 PM > Formating ENCRYPT...5/9/2019 12:10:10 PM > OK
5/9/2019 12:10:10 PM > Sending signature...5/9/2019 12:10:10 PM > OK
5/9/2019 12:10:10 PM > Writing preloader...5/9/2019 12:10:13 PM > OK
5/9/2019 12:10:13 PM > Writing pgpt...5/9/2019 12:10:13 PM > OK
5/9/2019 12:10:13 PM > Writing lk...5/9/2019 12:10:14 PM > OK
5/9/2019 12:10:14 PM > Writing lk2...5/9/2019 12:10:14 PM > OK
5/9/2019 12:10:14 PM > Writing laf...5/9/2019 12:10:26 PM > Failed!
5/9/2019 12:10:26 PM > Performed by 2.9.2 Software version.
5/9/2019 12:10:26 PM > Elapsed Time: 12:01:22 AM
5/9/2019 12:10:58 PM > --------------------------------------------------------------------------------
5/9/2019 12:10:58 PM > Checking data...5/9/2019 12:10:59 PM > OK
5/9/2019 12:11:00 PM > Platform: LG MTK
5/9/2019 12:11:00 PM > Selected port:
5/9/2019 12:11:00 PM > Selected baudrate: 921600
5/9/2019 12:11:00 PM > Selected model: SP200
5/9/2019 12:11:00 PM > Selected USB connection type
5/9/2019 12:11:01 PM > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
5/9/2019 12:11:01 PM > or
5/9/2019 12:11:01 PM > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
5/9/2019 12:11:01 PM > Phone found at port COM7
5/9/2019 12:11:54 PM > Port is not active!
5/9/2019 12:11:54 PM > Performed by 2.9.2 Software version.
5/9/2019 12:11:54 PM > Elapsed Time: 12:00:56 AM
5/9/2019 12:12:07 PM > --------------------------------------------------------------------------------
5/9/2019 12:12:07 PM > Checking data...5/9/2019 12:12:08 PM > OK
5/9/2019 12:12:08 PM > Platform: LG MTK
5/9/2019 12:12:08 PM > Selected port:
5/9/2019 12:12:08 PM > Selected baudrate: 921600
5/9/2019 12:12:08 PM > Selected model: SP200
5/9/2019 12:12:08 PM > Selected USB connection type
5/9/2019 12:12:09 PM > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
5/9/2019 12:12:09 PM > or
5/9/2019 12:12:09 PM > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.5/9/2019 12:12:36 PM > Canceled!
5/9/2019 12:12:36 PM > Performed by 2.9.2 Software version.
5/9/2019 12:12:36 PM > Elapsed Time: 12:00:29 AM
5/9/2019 12:13:08 PM > --------------------------------------------------------------------------------
5/9/2019 12:13:08 PM > Checking data...5/9/2019 12:13:09 PM > OK
5/9/2019 12:13:09 PM > Platform: LG MTK
5/9/2019 12:13:09 PM > Selected port:
5/9/2019 12:13:09 PM > Selected baudrate: 921600
5/9/2019 12:13:09 PM > Selected model: SP200
5/9/2019 12:13:09 PM > Selected USB connection type
5/9/2019 12:13:10 PM > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
5/9/2019 12:13:10 PM > or
5/9/2019 12:13:10 PM > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.5/9/2019 12:13:40 PM > Canceled!
5/9/2019 12:13:40 PM > Performed by 2.9.2 Software version.
5/9/2019 12:13:40 PM > Elapsed Time: 12:00:32 AM
5/9/2019 12:14:52 PM > --------------------------------------------------------------------------------
5/9/2019 12:14:52 PM > Checking data...5/9/2019 12:14:53 PM > OK
5/9/2019 12:14:53 PM > Platform: LG MTK
5/9/2019 12:14:53 PM > Selected port:
5/9/2019 12:14:53 PM > Selected baudrate: 921600
5/9/2019 12:14:53 PM > Selected model: SP200
5/9/2019 12:14:53 PM > Selected USB connection type
5/9/2019 12:14:55 PM > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
5/9/2019 12:14:55 PM > or
5/9/2019 12:14:55 PM > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
5/9/2019 12:15:01 PM > Phone found at port COM7
5/9/2019 12:15:34 PM > Port is not active!
5/9/2019 12:15:34 PM > Performed by 2.9.2 Software version.
5/9/2019 12:15:34 PM > Elapsed Time: 12:00:41 AM
5/9/2019 12:16:15 PM > --------------------------------------------------------------------------------
5/9/2019 12:16:15 PM > Checking data...5/9/2019 12:16:16 PM > OK
5/9/2019 12:16:16 PM > Platform: LG MTK
5/9/2019 12:16:16 PM > Selected port:
5/9/2019 12:16:16 PM > Selected baudrate: 921600
5/9/2019 12:16:16 PM > Selected model: SP200
5/9/2019 12:16:16 PM > Selected USB connection type
5/9/2019 12:16:18 PM > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
5/9/2019 12:16:18 PM > or
5/9/2019 12:16:18 PM > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
5/9/2019 12:16:19 PM > Phone found at port COM7
5/9/2019 12:16:52 PM > Port is not active!
5/9/2019 12:16:52 PM > Performed by 2.9.2 Software version.
5/9/2019 12:16:52 PM > Elapsed Time: 12:00:37 AM


Go to the top of the page
 
+Quote Post

13 Páginas: V  « < 8 9 10 11 12 > » 
Closed TopicStart new topic
3 usuario(s) está(n) leyendo este tema (3 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 02:09 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +