ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

4 Páginas: V  < 1 2 3 4 >  
Reply to this topicStart new topic
Aporte, Unlock J727p Bin 4 Probado
lolo24
mensaje Sep 17 2018, 11:18 AM
Publicado: #21

Maestro del Clan
***

Grupo: Miembros
Mensajes: 974
Agradecimientos: 2213
Registrado: 22-January 16
Desde: CUBA
Miembro No.: 791,161
Pais:cu


CITA(Annier84 @ Sep 12 2018, 02:21 PM) *
Ya tengo la solucion completamente provada al 100 porciento provada


Hola.
La comparte con la comunidad?


--------------------
Mis Box: SimgaKey PLUS - OctopusBox (Samsung,LG,FrpTool) - UMT + NCK - EFT - GC Pro Key (DEAD) - Infinity Box
- FuriousGold Pack 1,2,3,4,5,6 - Eft PRO - Infinty Box ...ChimeraTOOL


* Use siempre el botón DAR GRACIAS
* Use el buscador antes de Publicar
* Siga las reglas del FORO AQUI
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a lolo24 por su Colaboracion:
shancia
Anunciante Autorizado
mensaje Sep 17 2018, 11:18 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
paquito22
mensaje Sep 18 2018, 10:05 PM
Publicado: #22

Miembro del Clan
*

Grupo: Miembros
Mensajes: 192
Agradecimientos: 400
Registrado: 28-January 10
Miembro No.: 81,924



Algun compañero que quiera compartir la salucion de señal con el foro por favor, ya que habemos muchos con ese problema.
Go to the top of the page
 
+Quote Post
Annier84
mensaje Sep 19 2018, 02:30 PM
Publicado: #23

Miembro del Clan
*

Grupo: Miembros
Mensajes: 175
Agradecimientos: 256
Registrado: 6-October 10
Desde: CUBA
Miembro No.: 139,169



Ak les pondre dos soluciones con las cuales pueden solucionar este problema la primera s las pongo en una imagen esta sale 100 provado por mi

La segunda es mediante la escritura del combination COMBINATION_SPT_FA70_J727PVPU4ARF1_SPTFAC_CL10429084_QB18608896_REV00_user_mid_n
ship_MULTI_CERT.tar.md5 activamos en la calculador *#0808# activamos el DM y escrivimos la seguridad con Samkey nuevamente por favor agradescan plis las imagenes se las pondre enumeradas
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a Annier84 por su Colaboracion:
paquito22, shancia, Trocotrofo
paquito22
mensaje Sep 19 2018, 03:59 PM
Publicado: #24

Miembro del Clan
*

Grupo: Miembros
Mensajes: 192
Agradecimientos: 400
Registrado: 28-January 10
Miembro No.: 81,924



Con la primera solucion, me salta un mensaje diciendo: WARNING WARNING WARNING.. THIS WILL ERASE IMEI,CERT & CALIBRATION DATA DO YOU WANT TO CONTINUE???.. Traducido: ADVERTENCIA ADVERTENCIA ADVERTENCIA ... ESTO ERRARÁ LOS DATOS DE IMEI, CERT Y CALIBRACIÓN ¿DESEA CONTINUAR?

Sera seguro proceder??
Go to the top of the page
 
+Quote Post
lolo24
mensaje Sep 21 2018, 12:50 PM
Publicado: #25

Maestro del Clan
***

Grupo: Miembros
Mensajes: 974
Agradecimientos: 2213
Registrado: 22-January 16
Desde: CUBA
Miembro No.: 791,161
Pais:cu


paquito22
No te lo recomeinedo si no tienes backup de sguridad.


--------------------
Mis Box: SimgaKey PLUS - OctopusBox (Samsung,LG,FrpTool) - UMT + NCK - EFT - GC Pro Key (DEAD) - Infinity Box
- FuriousGold Pack 1,2,3,4,5,6 - Eft PRO - Infinty Box ...ChimeraTOOL


* Use siempre el botón DAR GRACIAS
* Use el buscador antes de Publicar
* Siga las reglas del FORO AQUI
Go to the top of the page
 
+Quote Post
paquito22
mensaje Sep 21 2018, 09:24 PM
Publicado: #26

Miembro del Clan
*

Grupo: Miembros
Mensajes: 192
Agradecimientos: 400
Registrado: 28-January 10
Miembro No.: 81,924



De hecho hice el proceso y al parecer todo se encuentra normal (IMEI, baseband, y todo lo demas), excepto que ahora me dice SIM INVALIDA, pero ya les envie un correo a los de SAMKEY para ver si puedo hacer nuevamente la liberacion atravez de ellos sin costos extras, pero aun no han respondido.
Go to the top of the page
 
+Quote Post
LEEWIZZ
mensaje Sep 24 2018, 04:45 PM
Publicado: #27

Miembro del Clan
*

Grupo: Miembros
Mensajes: 11
Agradecimientos: 11
Registrado: 25-October 11
Miembro No.: 269,220



Loading ADB module...OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : F094AAD5
Model Name : SM-J727P
Android Version : 7.0
Checking SEC data...OK
PDA Version : J727PVPU4ARG2
Warranty VOID : 0
Debug Level : READY
Preparing RIL module....[P1:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Waiting for phone to reboot...OK
Waiting for phone to initialize...OK
Loading RIL applet....[P1:OK]...[SU:NA]...[J7POPLTESPR]...OK
Starting RIL applet...[REQ:OK]...OK
Analysing SEC data...OK
Writing SEC data...[SD1:OK]...[IM:OK]...[C1:OK]...[C2:OK]...[C3:OK]FAIL(11)
ERROR (1092): Timeout waiting for ADB ack!

SamKEY Team (2017)



alguien sabe por que me sale ese error?
Go to the top of the page
 
+Quote Post
paquito22
mensaje Sep 24 2018, 06:20 PM
Publicado: #28

Miembro del Clan
*

Grupo: Miembros
Mensajes: 192
Agradecimientos: 400
Registrado: 28-January 10
Miembro No.: 81,924



CITA(LEEWIZZ @ Sep 24 2018, 05:45 PM) *
Loading ADB module...OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : F094AAD5
Model Name : SM-J727P
Android Version : 7.0
Checking SEC data...OK
PDA Version : J727PVPU4ARG2
Warranty VOID : 0
Debug Level : READY
Preparing RIL module....[P1:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Waiting for phone to reboot...OK
Waiting for phone to initialize...OK
Loading RIL applet....[P1:OK]...[SU:NA]...[J7POPLTESPR]...OK
Starting RIL applet...[REQ:OK]...OK
Analysing SEC data...OK
Writing SEC data...[SD1:OK]...[IM:OK]...[C1:OK]...[C2:OK]...[C3:OK]FAIL(11)
ERROR (1092): Timeout waiting for ADB ack!

SamKEY Team (2017)
alguien sabe por que me sale ese error?


Recuerdo que alguna vez tuve un problema parecido, y lo unico que hice fue desinstalar HTC SYNC y Reinciar despues de de desinstalar, y si asi no funciona, puedes revisar en el foro de SAMKEY para una solucion mas concreta.


SAMKEY

Mensaje modificado por paquito22 el Sep 24 2018, 06:25 PM
Go to the top of the page
 
+Quote Post
paquito22
mensaje Oct 6 2018, 04:02 PM
Publicado: #29

Miembro del Clan
*

Grupo: Miembros
Mensajes: 192
Agradecimientos: 400
Registrado: 28-January 10
Miembro No.: 81,924



CITA(LEEWIZZ @ Sep 24 2018, 05:45 PM) *
Loading ADB module...OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : F094AAD5
Model Name : SM-J727P
Android Version : 7.0
Checking SEC data...OK
PDA Version : J727PVPU4ARG2
Warranty VOID : 0
Debug Level : READY
Preparing RIL module....[P1:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Waiting for phone to reboot...OK
Waiting for phone to initialize...OK
Loading RIL applet....[P1:OK]...[SU:NA]...[J7POPLTESPR]...OK
Starting RIL applet...[REQ:OK]...OK
Analysing SEC data...OK
Writing SEC data...[SD1:OK]...[IM:OK]...[C1:OK]...[C2:OK]...[C3:OK]FAIL(11)
ERROR (1092): Timeout waiting for ADB ack!

SamKEY Team (2017)
alguien sabe por que me sale ese error?




Pedonen por doble post, solo que ya no me permite editar el anterior, resulta que trabajando uno de la misma version (J727PVPU4ARG2) me dio el mismo error en la etapa final de la liberacion: WRITE SEC Y la manera en que lo pude resolver es flasheando la combination del mismo bit 4 COMBINATION_SPT_FA70_J727PVPU4ARF1 y darle y *#0808# y seleccionar la ultima opcion y darle a WRITE SEC y si tira algun error, solo es de darle nuevamente a esa misma opcion y listo, asi finaliza el proceso y solo es cuestion de pasarle la full flash stock de nuevo. Aunque yo aprevechando que ya tenia descargado la flash J727PVPU4BRH5 Version 8.0.1 se la pase de una vez y que funcionando al 100% bien.
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a paquito22 por su Colaboracion:
ITECH
jaf86
mensaje Oct 10 2018, 01:13 PM
Publicado: #30

Miembro del Clan
*

Grupo: Miembros
Mensajes: 255
Agradecimientos: 348
Registrado: 14-September 10
Desde: La Perla de Oriente El Salvador
Miembro No.: 132,772



Tengo uno en estos momentos(bin4) el cual sin tildar la seccion DEEP SEC CALCULATE me tira error en "leyendo la Ram"
Pero al tildarlo ya no tira error en leyendo la Ram PERO al terminar el log queda solamente en "waiting for server responding"... he quedado buen tiempo esperando pero no pasa de ahi...

Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 7E9C9B4A
Model Name : SM-J727P
Android Version : 8.1.0
Carrier : BST
Device CodeName : J7POPLTESPR
Board Type : MSM8953
Hardware : QCOM
Warranty VOID : 0
AP Version : J727PVPU4BRH5
CP Version : J727PVPU4BRH5
Debug Level : READY
CP Debug Level : READY
Preparing RIL module....[P1:OK]...[SH:OK]...[J7POPLTESPR]...OK
Starting RIL applet..[AT:OK]...OK
Reading MODEM security info...
IMEI : 35355908
MSL address : R28J73G18W
Certificate Status : VALID (OK)
Bypassing MEID auth...OK
Reading SPC/MSL code...[SPC:583016]...OK
Searching for SAMSUNG Diagnostic Port...[COM45]...OK
QC SW Rev : MPSS.TA.2.3.c2-00079-8953_GEN_PACK-1
Initialize result : OK
Authorizing NV access...OK
Reading NV network data...OK
Reading NV Elements...OK
Reading NV config...OK
Reading NV registry...OK
Writing applet to device....OK
Starting UPLOAD MODE...OK
Searching for device in UPLOAD MODE...[COM5]...OK
Preparing to read data...OK
Reading RAM data...[SEC:OK]...OK
Security analyse result : OK
Rebooting device to NORMAL mode...OK
Sending data to SERVER...OK
Waiting for SERVER response..

recomiendan pasar combinacion y hacerle nuevamente a liberacion?.


--------------------
Go to the top of the page
 
+Quote Post
abdy22
mensaje Oct 23 2018, 03:47 PM
Publicado: #31

Miembro del Clan
*

Grupo: Miembros
Mensajes: 27
Agradecimientos: 5
Registrado: 25-February 12
Desde: honduras
Miembro No.: 311,695




Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : B6xxxxxx
Model Name : SM-J727P
Android Version : 7.0
Carrier : XAS
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM40]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-J727P
VER : J727PVPU4ARG2/J727PSPT4ARG2/J727PVPU4ARG2/J727PVPU4ARG2
IMEI : 3557xxxxxxxxxx
S/N : 0000000000
U/N : CQ300B62AD6FAC4
AP Version : J727PVPU4ARG2
CP Version : J727PVPU4ARG2
Android Version : 7.0
Warranty VOID : 1
SIM State : OK
Debug Level : READY
CP Debug Level : READY
Loading RIL applet...OK
Starting RIL applet...OK
Reading MODEM security info...
IMEI : 355xxxxxxxx
MSL address : R28K416TJC
Certificate Status : VALID (OK)
Bypassing MEID auth...[PW1:NA]...FAIL


alguien sabe de este problema.
ya revise y todo esta asi

final imei certi pass
mipi test success
Go to the top of the page
 
+Quote Post
johandeuscht
mensaje Oct 23 2018, 04:42 PM
Publicado: #32

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 437
Agradecimientos: 1058
Registrado: 17-August 13
Desde: Guadalajara
Miembro No.: 505,291
Pais:mx


con chimera sacan bit 4 sin root
solo conectar con adb activo y seguir instrucciones.

para quien le sirva el dato.
Go to the top of the page
 
+Quote Post
A continuacion 5 usuario(s) le Agradece(n) a johandeuscht por su Colaboracion:
Aguicell, ceranense, CK791, franklin1525, Pepoonkx!!
gionfj
mensaje Oct 25 2018, 04:00 PM
Publicado: #33

Miembro del Clan
*

Grupo: Miembros
Mensajes: 5
Agradecimientos: 1
Registrado: 5-February 14
Miembro No.: 566,974



CITA(unlockfactory @ Oct 24 2018, 05:11 PM) *
Comprobado en la ultima version de Android 100%.

trate pero no tuve exito me dice solo incapaz de desbloquear
Go to the top of the page
 
+Quote Post
andrescel
mensaje Oct 30 2018, 04:13 PM
Publicado: #34

Miembro del Clan
*

Grupo: Expulsados
Mensajes: 147
Agradecimientos: 29
Registrado: 18-October 13
Desde: hermosillo
Miembro No.: 527,776
Pais:ad


entonces aun no hay nada confirmado bien el unlock?
Go to the top of the page
 
+Quote Post
henryk iv
mensaje Oct 31 2018, 07:08 AM
Publicado: #35

Miembro del Clan
*

Grupo: Miembros
Mensajes: 131
Agradecimientos: 101
Registrado: 6-June 18
Miembro No.: 1,050,458
Pais:ve


Ultima actualzacion y nada del J727P aun.

10-24-2018, 10:52 PM
What's New :


Added J327P PERMANENT Unlock(BIT3 & BIT4)- Any KNOX
Added support for G960U, G960U1 Virgin Mobile USA (VMU)
Added support for G965U, G965U1 Virgin Mobile USA (VMU)
Added new FREE function : Read SPC/MSL

Notice:
New J327P Permanent Unlock is FREE for phones which already unlocked by SamKEY TMO before.



Mensaje modificado por henryk iv el Oct 31 2018, 07:16 AM
Go to the top of the page
 
+Quote Post
j.roberto20
mensaje Nov 2 2018, 05:55 AM
Publicado: #36

Miembro del Clan
*

Grupo: Miembros
Mensajes: 15
Agradecimientos: 5
Registrado: 13-February 14
Miembro No.: 570,228



He hecho unlock perfecto a 10 equipos y doy fe de que Samkey TMO lo hace ocupando 5 créditos por teléfono. Salen a la primera y sin ninguna pérdida de serial.
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a j.roberto20 por su Colaboracion:
kukihrndz
ricardolara1402
mensaje Nov 5 2018, 11:13 PM
Publicado: #37

Miembro del Clan
*

Grupo: Miembros
Mensajes: 6
Agradecimientos: 5
Registrado: 18-March 18
Desde: México
Miembro No.: 1,032,493
Pais:mx


Sale de Una Solo con leer SPC
Yo lo que hice fue utilizar combination para leer el SPC MSL COMBINATION_SPT_FA70_J727PVPU4ARF1

Despues le pase el J727PVPU4ARG2_SPT4ARG2

ya con esto solo utilice SamKey Tmo y listo unlock

Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 58BDD3C1
Model Name : SM-J727P
Android Version : 7.0
Carrier : BST
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM186]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-J727P
VER : J727PVPU4ARG2/J727PSPT4ARG2/J727PVPU4ARG2/J727PVPU4ARG2
IMEI : 355743092477435
S/N : 0000000000
U/N : CQ30058BDD3C115
AP Version : J727PVPU4ARG2
CP Version : J727PVPU4ARG2
Android Version : 7.0
Warranty VOID : 0
SIM State : OK
Debug Level : 0x4f4c
Setting DEBUG level to HIGH.........OK
Waiting for Reboot...OK
CP Debug Level : 0x55ff
Setting CP DEBUG Mode.........OK
Waiting for Reboot...OK
Loading RIL applet...OK
Starting RIL applet...OK
Reading MODEM security info...
IMEI : 355743092477435
MSL address : R28K32TYQ9
Certificate Status : VALID (OK)
Bypassing MEID auth...OK
Reading SPC/MSL code...[SPC:117643]...OK
Switching to UPLOAD MODE...OK
Algorithm : MSM Crypto Engine
Waiting for UPLOAD MODE...[COM6]...OK
Preparing to read data...OK
Reading RAM data...OK
Rebooting device to NORMAL mode...OK
Calculating security data...[SIGN:OK]...OK
Waiting for Reboot...OK
Setting suitable DEBUG level.........OK
Waiting for Reboot...OK
Debug Level : OK
Checking USB Modem...[COM186]...OK
Connecting to DEVICE in DL-Mode...OK [COM6]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Checking RADIO...OK
Loading RIL applet...OK
Starting RIL applet...OK
Reading data from phone...OK
Searching for SAMSUNG Diagnostic Port...[COM187]...OK
QC SW Rev : MPSS.TA.2.3.c2-00014-8953_GEN_PACK-1.85362.1.86233.1
Release : Jun 19 201822:51:42Feb 01 2017J727P.028953
Authorizing NV access...[PWD:OK]...[SPC:OK]...OK
Sending data to SERVER...OK
Waiting for SERVER response...OK
Writing SEC data...[PWD:OK]...[SPC:OK]...[MD1:OK]...[MD2:OK]...[0x04]...OK
Checking USB Modem...[COM186]...OK
Connecting to DEVICE in DL-Mode...OK [COM6]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Verifying SimLock status...OK
Operation successful.


Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a ricardolara1402 por su Colaboracion:
joss89220512, kukihrndz
eljaker
mensaje Nov 28 2018, 10:02 AM
Publicado: #38

Miembro del Clan
*

Grupo: Miembros
Mensajes: 182
Agradecimientos: 384
Registrado: 16-March 14
Desde: El Salvador
Miembro No.: 581,314



con chimera sale de una sin root ni creditos
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a eljaker por su Colaboracion:
onastika
yxmikx
mensaje Nov 29 2018, 12:30 PM
Publicado: #39

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 539
Agradecimientos: 571
Registrado: 20-July 09
Desde: Cuernavaca Morelos
Miembro No.: 49,163



les ha tocado que si libere pero no de señal¿ el imei esta normal
Go to the top of the page
 
+Quote Post
alec2001
mensaje Nov 30 2018, 03:46 PM
Publicado: #40

Miembro del Clan
*

Grupo: Miembros
Mensajes: 5
Agradecimientos: 1
Registrado: 18-April 09
Miembro No.: 32,854



lo corroboro con chimera sale de una sin creditos
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a alec2001 por su Colaboracion:
soportegsm

4 Páginas: V  < 1 2 3 4 >
Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 04:17 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +