ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Necesito Ayuda Con A065f Con Easy Jtag Emmc Inutilizable
Saak Garcia
mensaje Apr 14 2025, 07:02 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 2
Agradecimientos: 0
Registrado: 3-January 17
Desde: 79610
Miembro No.: 911,119
Pais:mx


Operation: Connect to Z3X EasyJtagPlus

HiPower mode is On
Setting Interface to EasyJtag2/ISP_HiPower
Setting IO Levels to 2.0V
Setting Frequence to 4 Mhz
Setting BusWidth to 1 Bit
CMD Pullup Level: 1927 mV
CMD Active Level: 1988 mV
Setting HS Timing to Disabled

Warning: Failed to set BusWidth. Check eMMC connection

EMMC Device Information :
EMMC CID: 150100445636444242001236 7F2BAD3
EMMC CSD: D0270132 F5903FFF6DBFFEF8E40400D
Manufacturer: SAMSUNG , NAME: DV6DBB , HEX: 445636444242 , S/N: 123607F2 , Rev: 00
Manufacturer ID: 15 , OEM ID: 00 , Device Type: BGA (Discrete embedded) , Date: 11/2023
EMMC ROM 1 (Main User Data) Capacity: 0 MB (0xFFFFFFFFFFFFFE00)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 32640 KB (0x000001FE0000)
EMMC RPMB Capacity: 32640 KB (0x000001FE0000) , Counter: 0 , Response: Maybe not Clean
EMMC GP1 (GP Partition 1) Capacity: 255 MB (0x00000FF80000) , WR_REL , ENH
EMMC GP2 (GP Partition 2) Capacity: 255 MB (0x00000FF80000) , WR_REL , ENH
EMMC GP3 (GP Partition 3) Capacity: 255 MB (0x00000FF80000) , WR_REL , ENH
EMMC GP4 (GP Partition 4) Capacity: 255 MB (0x00000FF80000) , WR_REL , ENH
Extended CSD Information :
Extended CSD rev:
BootConfig Write Protection: PowerOn Protection
Boot configuration [PARTITION_CONFIG]: 0xFF , User area enabled for boot , Boot ACK
Boot Bus Config: 0xFF , Unknown
H/W Reset Function [RST_N_FUNCTION]: 0xFF , Unknown
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition settings [PARTITION_SETTING_COMPLETED]: 0x01
EMMC Init completed
Extcsd backup saved: DV6DBB_123607F2_20250414_165535.extcsd (old backup)
eMMC is unusable

Error: Could not connect to device

Mensaje modificado por frontlinecel el Apr 15 2025, 04:45 PM
Motivo de edición: título - recuerde que este es un foro en Español y debe escribir en ese idioma
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 usuario(s) está(n) leyendo este tema (1 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 21st April 2026 - 09:25 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +