ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Closed TopicStart new topic
Unlock Samsung J7 Perx (j727p) Binario 4
greynosa1
mensaje Jul 25 2018, 01:00 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 38
Agradecimientos: 99
Registrado: 22-July 11
Desde: el salvador
Miembro No.: 233,940
Pais:sv


Hola amigos de nuevo por aca me presento con un problema y es que necesito liberar mi samsung j7 perx pero viene en binario 4 hasta el dia de hoy habia liberado b1, b2 y b3 y cre que ayer actualizo el dispositivo y no puedo liberarlo; incluso busque combination en el soporte oficial de z3x pero aun no hay nada, necesito los archivos de binario 4 el combi y la flash oficial
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Jul 25 2018, 01:00 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
skynet1993
mensaje Jul 25 2018, 01:32 PM
Publicado: #2

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 628
Agradecimientos: 2078
Registrado: 11-May 13
Desde: Los Angeles Ca USA
Miembro No.: 469,518



CITA(greynosa1 @ Jul 25 2018, 11:00 AM) *
Hola amigos de nuevo por aca me presento con un problema y es que necesito liberar mi samsung j7 perx pero viene en binario 4 hasta el dia de hoy habia liberado b1, b2 y b3 y cre que ayer actualizo el dispositivo y no puedo liberarlo; incluso busque combination en el soporte oficial de z3x pero aun no hay nada, necesito los archivos de binario 4 el combi y la flash oficial


Mi internet es muy lento pero aqui dejo de donde se puede bajar luego intentare subirlo:

Mensaje modificado por skynet1993 el Jul 25 2018, 01:34 PM
 


--------------------
"Si me pides algun archivo por inbox seras reportado al administrador, contribuya al clan o compre una membresia VIP".
Go to the top of the page
 
+Quote Post
skynet1993
mensaje Jul 25 2018, 02:59 PM
Publicado: #3

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 628
Agradecimientos: 2078
Registrado: 11-May 13
Desde: Los Angeles Ca USA
Miembro No.: 469,518



Se me paso dejo la clave del FW

Mensaje modificado por skynet1993 el Jul 25 2018, 03:03 PM
 


--------------------
"Si me pides algun archivo por inbox seras reportado al administrador, contribuya al clan o compre una membresia VIP".
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a skynet1993 por su Colaboracion:
celumaster
adov980
mensaje Aug 27 2018, 08:08 PM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 2
Registrado: 17-April 16
Miembro No.: 819,483
Pais:ve


CITA(skynet1993 @ Jul 25 2018, 03:59 PM) *
Se me paso dejo la clave del FW


Como puedo hacerle unlock al j7 perx con el binario 4?
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a adov980 por su Colaboracion:
fabioius
tuningcell9
mensaje Oct 30 2018, 05:47 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 48
Agradecimientos: 70
Registrado: 27-June 16
Desde: puerto vallarta
Miembro No.: 843,871
Pais:mx



unlock J727P BIT4 con Chimera gratis

le tienes que poner chip telcel antes de empezar. solita chimera degrada el modem y listo unlock gratisss

Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J727P
Sales Code: BST
Country Code: USA
Timezone: America/Mexico_City
Android Version: 8.1.0 [M1AJQ] [SDK 27]
Build Date: Thu Aug 23 22:13:12 KST 2018
PDA Version: J727PVPU4BRH5 [august 2018, rev5]
Phone Version: J727PVPU4BRH5 [august 2018, rev5]
CSC Version: J727PSPT4BRH5 [august 2018, rev5]
Product Code: BST
HIDSw Version: J727PVPU4BRH5/J727PSPT4BRH5/J727PVPU4BRH5/J727PVPU4BRH5
Board Platform: MSM8953
Modem Platform: MSM8953
Serial Number: 00000000000
Imei: 3557430906---------
Unique Number: CQ3001DB5D8F4C4
Connections: AT,MTP
Battery Status: 3.87V (63%)
Network Type: CDMA
SIM Status: CARD_IO_ERROR
Multisim Config: SS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2018-08-01
Data Encryption State: encrypted
Unlocking...
Checking modem.
Checking SIM card.
Preparing...
Checking debug level.
The phone will restart in upload mode, this is normal operation, do not worry!
Switching to upload mode. Be patient! Do NOT disconnect the phone!
Waiting for upload interface...
Waiting for upload interface. Be patient! Do NOT disconnect the phone!
Upload interface: SAMSUNG Mobile USB Modem (COM26)
Reading data...
Reading data is in progress. Be patient! Do NOT disconnect the phone!
Calculating...
Calculation is in progress.
Unlocking...
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Checking debug level.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data.
SPC/MSL: 813502
Descargando imagen del módem. Be patient! Do NOT disconnect the phone!
Checking downloaded image.
Decompressing modem image.
Flashing modem image.
Flashing firmware...
Switching to download mode.
Waiting for download mode.
Connecting.
Reading PIT from phone.
Flashing adspso.bin
Flashing modem.bin
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Initializing diag mode.
Appropriate serial port is not available.
1. On the dial window, enter ##3424# 2. Enter MSL/SPC (813502) if needed. 3. Select QUALCOMM USB SETTINGS 4. Select DM+MODEM+ADB 5. Click the Ok on phone display 6. Wait a few seconds until the diag port is initialized 7. Click Ok button
Trying to enable diagnostic mode. Be patient! Do NOT disconnect the phone!
The phone will reboot.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Succeeded.
Preparing.
Restoring modem.
Descargando imagen del módem. Be patient! Do NOT disconnect the phone!
Checking downloaded image.
Decompressing modem image.
Flashing modem image.
Flashing firmware...
Switching to download mode.
Waiting for download mode.
Connecting.
Reading PIT from phone.
Flashing adspso.bin
Flashing modem.bin
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Unlock is in progress.
Unlocked.
Successfully finished.
Finished at local time: [10.30.18 16:17:43]
WorkID: 46721438
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a tuningcell9 por su Colaboracion:
angelmayor
Telcel Caborca
mensaje Nov 14 2018, 12:25 PM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 8
Registrado: 11-March 17
Miembro No.: 932,875
Pais:mx


CITA(tuningcell9 @ Oct 30 2018, 03:47 PM) *
unlock J727P BIT4 con Chimera gratis

le tienes que poner chip telcel antes de empezar. solita chimera degrada el modem y listo unlock gratisss

Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J727P
Sales Code: BST
Country Code: USA
Timezone: America/Mexico_City
Android Version: 8.1.0 [M1AJQ] [SDK 27]
Build Date: Thu Aug 23 22:13:12 KST 2018
PDA Version: J727PVPU4BRH5 [august 2018, rev5]
Phone Version: J727PVPU4BRH5 [august 2018, rev5]
CSC Version: J727PSPT4BRH5 [august 2018, rev5]
Product Code: BST
HIDSw Version: J727PVPU4BRH5/J727PSPT4BRH5/J727PVPU4BRH5/J727PVPU4BRH5
Board Platform: MSM8953
Modem Platform: MSM8953
Serial Number: 00000000000
Imei: 3557430906---------
Unique Number: CQ3001DB5D8F4C4
Connections: AT,MTP
Battery Status: 3.87V (63%)
Network Type: CDMA
SIM Status: CARD_IO_ERROR
Multisim Config: SS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2018-08-01
Data Encryption State: encrypted
Unlocking...
Checking modem.
Checking SIM card.
Preparing...
Checking debug level.
The phone will restart in upload mode, this is normal operation, do not worry!
Switching to upload mode. Be patient! Do NOT disconnect the phone!
Waiting for upload interface...
Waiting for upload interface. Be patient! Do NOT disconnect the phone!
Upload interface: SAMSUNG Mobile USB Modem (COM26)
Reading data...
Reading data is in progress. Be patient! Do NOT disconnect the phone!
Calculating...
Calculation is in progress.
Unlocking...
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Checking debug level.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data.
SPC/MSL: 813502
Descargando imagen del módem. Be patient! Do NOT disconnect the phone!
Checking downloaded image.
Decompressing modem image.
Flashing modem image.
Flashing firmware...
Switching to download mode.
Waiting for download mode.
Connecting.
Reading PIT from phone.
Flashing adspso.bin
Flashing modem.bin
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Initializing diag mode.
Appropriate serial port is not available.
1. On the dial window, enter ##3424# 2. Enter MSL/SPC (813502) if needed. 3. Select QUALCOMM USB SETTINGS 4. Select DM+MODEM+ADB 5. Click the Ok on phone display 6. Wait a few seconds until the diag port is initialized 7. Click Ok button
Trying to enable diagnostic mode. Be patient! Do NOT disconnect the phone!
The phone will reboot.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Succeeded.
Preparing.
Restoring modem.
Descargando imagen del módem. Be patient! Do NOT disconnect the phone!
Checking downloaded image.
Decompressing modem image.
Flashing modem image.
Flashing firmware...
Switching to download mode.
Waiting for download mode.
Connecting.
Reading PIT from phone.
Flashing adspso.bin
Flashing modem.bin
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Unlock is in progress.
Unlocked.
Successfully finished.
Finished at local time: [10.30.18 16:17:43]
WorkID: 46721438



Hola buen día, tengo un problema que me esta volviendo loco... Tengo la version de banda base: j727PVPU4BRH5 y la versión de android 8.1.0 y no encuentro un bin que no me de fail en odin, no se que hacer.


Go to the top of the page
 
+Quote Post
diegomania65
mensaje Dec 1 2018, 10:39 AM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 21
Agradecimientos: 62
Registrado: 10-June 16
Miembro No.: 838,083
Pais:mx


TENIA ESA VERSION Y DEGRADE A ANDROID 7.0 J727PVPU4ARG2_SPT4ARG2 LO HICE CON ESTA VERSION DE ODIN, PERO NO SE SI TALBIEN FUNCIONE CON LAS OTRAS.
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
cinderback
mensaje Dec 12 2018, 12:59 AM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 86
Agradecimientos: 183
Registrado: 14-May 16
Desde: Mexicali
Miembro No.: 828,807
Pais:mx


CITA(diegomania65 @ Dec 1 2018, 10:39 AM) *
TENIA ESA VERSION Y DEGRADE A ANDROID 7.0 J727PVPU4ARG2_SPT4ARG2 LO HICE CON ESTA VERSION DE ODIN, PERO NO SE SI TALBIEN FUNCIONE CON LAS OTRAS.




A cual versión te refieres bro?
Go to the top of the page
 
+Quote Post
ANDRECELL2011
mensaje Dec 12 2018, 01:59 PM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 10
Agradecimientos: 12
Registrado: 17-November 17
Miembro No.: 1,003,709
Pais:gt


CITA(diegomania65 @ Dec 1 2018, 09:39 AM) *
TENIA ESA VERSION Y DEGRADE A ANDROID 7.0 J727PVPU4ARG2_SPT4ARG2 LO HICE CON ESTA VERSION DE ODIN, PERO NO SE SI TALBIEN FUNCIONE CON LAS OTRAS.



Podrias ampliar mas la informacion de que fue lo que le hiciste a tu tel J727P Bit 4?
Go to the top of the page
 
+Quote Post
DRK
mensaje Dec 24 2018, 02:09 PM
Publicado: #10

Miembro del Clan
*

Grupo: Miembros
Mensajes: 222
Agradecimientos: 80
Registrado: 5-December 10
Desde: Colon, HONDURAS
Miembro No.: 157,580



se puede degradar sin problemas a 7.0 pero siempre binario 4 con este flash
J727PVPU4ARG2_SPT4ARG2
de eso habla


--------------------
Go to the top of the page
 
+Quote Post
angelmayor
mensaje Feb 6 2019, 11:57 PM
Publicado: #11

Miembro del Clan
*

Grupo: Miembros
Mensajes: 115
Agradecimientos: 282
Registrado: 7-June 11
Desde: Cd. Juárez Chih. Méx.
Miembro No.: 218,171
Pais:mx


CITA(tuningcell9 @ Oct 30 2018, 06:47 PM) *
unlock J727P BIT4 con Chimera gratis

le tienes que poner chip telcel antes de empezar. solita chimera degrada el modem y listo unlock gratisss

Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J727P
Sales Code: BST
Country Code: USA
Timezone: America/Mexico_City
Android Version: 8.1.0 [M1AJQ] [SDK 27]
Build Date: Thu Aug 23 22:13:12 KST 2018
PDA Version: J727PVPU4BRH5 [august 2018, rev5]
Phone Version: J727PVPU4BRH5 [august 2018, rev5]
CSC Version: J727PSPT4BRH5 [august 2018, rev5]
Product Code: BST
HIDSw Version: J727PVPU4BRH5/J727PSPT4BRH5/J727PVPU4BRH5/J727PVPU4BRH5
Board Platform: MSM8953
Modem Platform: MSM8953
Serial Number: 00000000000
Imei: 3557430906---------
Unique Number: CQ3001DB5D8F4C4
Connections: AT,MTP
Battery Status: 3.87V (63%)
Network Type: CDMA
SIM Status: CARD_IO_ERROR
Multisim Config: SS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2018-08-01
Data Encryption State: encrypted
Unlocking...
Checking modem.
Checking SIM card.
Preparing...
Checking debug level.
The phone will restart in upload mode, this is normal operation, do not worry!
Switching to upload mode. Be patient! Do NOT disconnect the phone!
Waiting for upload interface...
Waiting for upload interface. Be patient! Do NOT disconnect the phone!
Upload interface: SAMSUNG Mobile USB Modem (COM26)
Reading data...
Reading data is in progress. Be patient! Do NOT disconnect the phone!
Calculating...
Calculation is in progress.
Unlocking...
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Checking debug level.
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Reading data.
SPC/MSL: 813502
Descargando imagen del módem. Be patient! Do NOT disconnect the phone!
Checking downloaded image.
Decompressing modem image.
Flashing modem image.
Flashing firmware...
Switching to download mode.
Waiting for download mode.
Connecting.
Reading PIT from phone.
Flashing adspso.bin
Flashing modem.bin
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Initializing diag mode.
Appropriate serial port is not available.
1. On the dial window, enter ##3424# 2. Enter MSL/SPC (813502) if needed. 3. Select QUALCOMM USB SETTINGS 4. Select DM+MODEM+ADB 5. Click the Ok on phone display 6. Wait a few seconds until the diag port is initialized 7. Click Ok button
Trying to enable diagnostic mode. Be patient! Do NOT disconnect the phone!
The phone will reboot.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Succeeded.
Preparing.
Restoring modem.
Descargando imagen del módem. Be patient! Do NOT disconnect the phone!
Checking downloaded image.
Decompressing modem image.
Flashing modem image.
Flashing firmware...
Switching to download mode.
Waiting for download mode.
Connecting.
Reading PIT from phone.
Flashing adspso.bin
Flashing modem.bin
Restarting phone.
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Unlock is in progress.
Unlocked.
Successfully finished.
Finished at local time: [10.30.18 16:17:43]
WorkID: 46721438


Muchas gracias, hice el procedimiento que mencionas con Chimera y el equipo quedó desbloqueado en pocos minutos.


--------------------
Mis herramientas: Medusa Box, Medusa PRO Box, UFS-3 Tornado, Sigma Box Pack 1, pack 2, pack 3, pack 4, pack 5, Octopus LG y Samsung, GPG Dragón, Z3X LG y Samsung Pro, XTC 2 Clip, Cs-Tool, NCK Dongle, GCPro Key, UMT Dongle, Hua Dongle, Best Smart Tools, Miracle Box y Miracle Key, Activación Falcon Box, Activación UNI Android Tool, Chimera Tool, Octoplus FRP Tool, EFT Pro, Hydra Tool, UnlockTool y muchos cables de servicio uart y de otros. Gracias a mi esposa por ser la parte principal de este proyecto y por sacar las cuentas manuales XD y también gracias a Clangsm.com por ser una gran comunidad unlock.
Go to the top of the page
 
+Quote Post

Closed TopicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 01:56 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +