Error Al Liberar G955u De Atyt Opciones

[eljaker]

ayuda Tengo este problema ala hora de leer los codigos via server





UNLOCK INSTRUCCIONES:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Unlocking using Server:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G955U
Selected port: COM72 SAMSUNG Mobile USB Serial Port
Software version: 33.7

Checking Login and Password... Listo
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-G955U
Android version: 8.0.0
PDA version: G955USQU5CRG3
CSC version: G955UOYN5CRG3
Versión del telefono: G955USQU5CRG3
Código del Producto: SM-G955UZSAATT
Código de país CSC: USA
Código de Venta CSC: ATT
Phone SN: R38J501NJBF
IMEI: 357756081650000
HW version: REV1.0
RF cal date: 2017.05.08
Chip name: MSM8998
Módem: MSM8998
Security patch: 2018-07-01
Boot Warranty bit: 0
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM6 detected
Lectura de datos desde el teléfono ... Listo
Calculando... error (0)

Done with Samsung Tool PRO v.33.7

[Anunciante Autorizado]

[eljaker]

Es un s8 de atyt android 8.0.0

[dennks]

ayuda Tengo este problema ala hora de leer los codigos via server

UNLOCK INSTRUCCIONES:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Unlocking using Server:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G955U
Selected port: COM72 SAMSUNG Mobile USB Serial Port
Software version: 33.7

Checking Login and Password... Listo
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-G955U
Android version: 8.0.0
PDA version: G955USQU5CRG3
CSC version: G955UOYN5CRG3
Versión del telefono: G955USQU5CRG3
Código del Producto: SM-G955UZSAATT
Código de país CSC: USA
Código de Venta CSC: ATT
Phone SN: R38J501NJBF
IMEI: 357756081650000
HW version: REV1.0
RF cal date: 2017.05.08
Chip name: MSM8998
Módem: MSM8998
Security patch: 2018-07-01
Boot Warranty bit: 0
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM6 detected
Lectura de datos desde el teléfono ... Listo
Calculando... error (0)

Done with Samsung Tool PRO v.33.7

Amigo flashea solo el modem del combination bit 5 haz la lectura de código y vuelve a flashear el firmware completo

Si fue de tu ayudano olvides dar las gracias

[blanier]

Por aqui la solucion.
https://www.clangsm.com/forum/index.php?sho...p;#entry1888485

Saludos