Quitar Contraseña/patron Zte Blade V6 Plus Sin Hard Reset Opciones

[rhoda]

Seleccionar modelo zte v6 en NCK, dar en "reset pattern-password" y conectar el telefono apagado. Listo telefono sin contraseña y sin borrar datos

 Image_1.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 51.62k ) Número de descargas: 0

CODE

Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected model: Blade V6
Action: Reset Pattern
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM18)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x513331334d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100513331334D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM36)
-Reading GPT Drive OK
[1]locksettings.db erased ok
[1]locksettings.db-wal erased ok
[1]locksettings.db-shm erased ok
If phone remain on logo, repower phone again.
If lock remain, perform 2 times reset without power on phone.
Wait untill phone will start charging.
All done.

[Anunciante Autorizado]

[garciajuanelo]

probado ZTE V6 max sale presionando boton de volumen abajo durante todo el proceso si despues se queda en el logo solo forzar apagado y volver a encender.