Unlock Lanix X500b Nck, Sin Root Opciones

[Cesar0005]

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: MT6580
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Block Size: 512
IMEI marker was found in nvram
IMEI[1] from NVRAM: 352861071492002
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.

Fichero(s) Adjunto(s)

 Captura.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 26.28k ) Número de descargas: 0

 

[Anunciante Autorizado]

[FABIANPOSSO]

ayuda
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.1
Selected model: MT6580
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : LANIX ILIUM S120 DA USB VCOM (Android) (COM4)
IMEI[1]: 352861070311823
IMEI[2]: 352861070311823
Reading security, wait...
SIM[1]:
Error to get NCK(1)
SIM[2]:
Error to get NCK(1)
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

[luilezama]

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: MT6580
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM14)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6580_S00
Connect error[4058]: S_FT_GET_MEMORY_FAIL
Boot Fail.!!!.
All done.

[Cesar0005]

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: MT6580
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM14)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6580_S00
Connect error[4058]: S_FT_GET_MEMORY_FAIL
Boot Fail.!!!.
All done.

prueba en otro puerto o otro cable.

[monchopro]

Unlock sin problemas

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.9.2
Selected model: ELBRUS
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[13]Detected: MediaTek PreLoader USB VCOM (Android) (COM13)
\\?\usb#vid_0e8d&pid_2000#6&35a1e78&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[19]META Port Detected: MediaTek USB VCOM (Android) (COM19)
USB\VID_0E8D&PID_2007\6&35A1E78&0&1
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6580,S01
[AP]APP_VER: ALPS.L1.MP6.V2_TINNO6580.WE.L
[META]BaseBand CPU : MT6580B, E00
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V6.P21
[META]HW_VER : TINNO6580_WE_L_HSPA_HW
Phone imei[1] : 352861071835xxx
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.
All done.