J727p Unlock U8 Opciones

[Alex Usca]

CON Z3X BOX ULTIMA ACTUALIZACION
VAMOS A UNLOCK Y DAMOS EN
UNLOCK INSTRUCTIONS:
Unlocking SPR via Diag:



UNLOCK INSTRUCTIONS:
Unlocking SPR via Diag:
Note! This unlock method is not permanent. It will work before next wiping or reflashing of phone.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings and press 'Read SPC/MSL' button.
5. Run dialer on phone, type ##3424#, enter SPC code and select 'DM+MODEM+ADB'.
6. Press 'Unlock...' button, select 'Unlock SPR DIAG'.

Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server' or press 'Unlock SPR via Server NEW' button,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Unlock SPR via Server NEW
Selected model: SM-J727P
Software version: 43.24

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 10 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J727P
Android version: 8.1.0
PDA version: J727PVPS8BUD1
CSC version: J727PSPT8BUD1
Phone version: J727PVPS8BUD1
Product code: Not Active
CSC country code: USA
CSC sales code: VMU
Carrier ID: VMU
Phone SN: 00000000000
IMEI: 353559084797321
HW version: J727P.02
RF cal date: 2017.10.30
Chip name: MSM8953
Modem board: MSM8953
Security patch: 2021-04-01
Boot Warranty bit: 0
SIM State: CARD_IO_ERROR
Waiting for device to become ready... OK
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Checking network lock status... LOCKED
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Writing data to phone... OK
Checking network lock status... UNLOCKED
Debranding phone to XAA... OK
Rebooting phone... OK

Done with Samsung Tool PRO v.43.24 [SM-J727P,Unlock SPR via Server NEW]