Aporte Reparacion De Ime J710fn Z3x Opciones

[JAVIMASTER]

facil solo hacer root escribir el xxxx que quieran y luego reparamos la red con z3x

REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Repair
Selected model: SM-J710MN
Software version: 33.5

If you are looking for 'Repair Network' function then you should use 'Patch Certificate'

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 6.0.1
PDA version: J710FXXU2APLE
CSC version: J710FODD2APK6
Phone version: J710FXXU2APK6
Product code: SM-J710FZKNINS
CSC country code: India
CSC sales code: INS
Phone SN: RF8HC2P4BAR
IMEI: 337744070032989
HW version: MP 0.300
RF cal date: 20161226
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2016-11-01
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Modem board: SHANNON315
HWID: 74 07 00 00 00 00 00 00 00 00 00 00 85 4E 1A 0D
Calculating... OK
Repairing... OK
Writing NV data... OK
Rebooting phone... OK
Repair done

Done with Samsung Tool PRO v.33.5




REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.

Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.

Operation: Patch Certificate
Selected model: SM-J710MN
Software version: 33.5

Waiting ADB device... OK
Reading phone info...
Model: SM-J710F
Android version: 6.0.1
PDA version: J710FXXU2APLE
CSC version: J710FODD2APK6
Phone version: J710FXXU2APK6
Product code: SM-J710FZKNINS
CSC country code: India
CSC sales code: INS
Phone SN: RF8HC2P4BAR
IMEI: 766809304231135
HW version: MP 0.300
RF cal date: 20161226
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2016-11-01
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue? Yes
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done

Done with Samsung Tool PRO v.33.5