ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
M153-11d Frp Listo!!!
Hardin
mensaje Jul 27 2018, 09:07 AM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 34
Agradecimientos: 149
Registrado: 23-January 17
Desde: USA
Miembro No.: 918,062
Pais:ar


Con esta versión -M153 11d- no conseguía quitar la cuenta, pero encontré esta forma...

1 - Actualizar OCTOPUS a la version 2.8.8 (o superior)

2 - Ir a la pestaña SUPPORT & OPTIONS (botón esquina superior izquierda)

3 - Ir a FILES DOWNLOADER (botón en el bloque del lado derecho)

4 - Buscar el archivo M16010b_00_OPEN_EU_OP_0102.oct y descargarlo

5 - Ir a la pestaña LG QUALCOMM (botón superior)

6 - Seleccionar el modelo M160 y en el bloque derecho seleccionar la pestaña MAIN

7 - En el bloque de texto seleccionan lo tres puntos [...] y buscan el archivo (del paso 4) de donde lo guardaron

8 - Con el cell en mod download dan al boton WRITE FIRMWARE y sale una advertencia de que degradar el software del equipo es peligroso (deben tener en cuenta que la version con la que me funcionó fue - M153 11d - no se si con alguna otra funcione)

Sale un log como este...

Opening "M16010b_00_OPEN_EU_OP_0102.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing tz...OK
Writing rpm...OK
Writing aboot...OK
Writing sbl1bak...OK
Writing tzbak...OK
Writing rpmbak...OK
Writing abootbak...OK
Writing sec...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing persist...OK
Writing laf...OK
Writing lafbak...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing factory...OK
Writing system...OK
Writing cust...OK
Writing BackupGPT...OK
Writing OP_T...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.8 Software version.

9 - Luego seleccionan el modelo M153 van a la pestaña ANDROID TOOLS (bloque derecho ultima pestaña)

10 - Y con el cell en modo Download dan RESET FRP LOCK

Sale un log como este...

Checking data...OK
Platform: LG Qualcomm
Selected port: COM914
Selected model: M153
Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
Reading info...
Model ID: LG-M160
IMEI: 354064-xx-xxxxxx-x
Android version: 6.0.1
Battery level: 18%
SW Version: M16010b
Mode: Emergency
Initializing flash...OK
SW version: LGM160AT-00-V10b-GLOBAL-COM-JAN-02-2017+0
Android version: 6.0.1
LAF Version: 1.1
Product ID: CB45S170824001788
IMEI: 354064-xx-xxxxxx-x
Target operator: GLOBAL
Hardware: rev_10
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...OK
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
If the phone hang on logo or is restarting afetr performing the operation, please re-flash it using the same or higher version of firmware
Performed by 2.8.8 Software version.

Y LISTO !!!

Mensaje modificado por Hardin el Jul 27 2018, 09:16 AM
Go to the top of the page
 
+Quote Post
A continuacion 10 usuario(s) le Agradece(n) a Hardin por su Colaboracion:
ALAIOCA, Bayosera, Brandon Andre, celdepot, enrinik, gholanda, JoelSolutions29, nilojoche, technomovil, yellows
Anunciante Autorizado
mensaje Jul 27 2018, 09:07 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
tetokilo
mensaje Oct 8 2018, 03:06 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 29
Agradecimientos: 7
Registrado: 13-November 17
Desde: USA
Miembro No.: 1,002,717
Pais:ar


se queda con ese mismo software y funciona todo bien .??
alguien mas probo.
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a tetokilo por su Colaboracion:
enrinik
slipher
mensaje Oct 12 2018, 03:00 PM
Publicado: #3

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 329
Agradecimientos: 327
Registrado: 9-January 09
Desde: Veracruz
Miembro No.: 17,193
Pais:ad


Yo acabo de testear con la solución del compañero y todo perfecto ya tenia rato buscando una rom que funcionara y con esta ha vuelto a la vida el cel, muy agradecido. Incluso repare imei con el modelo M160 y funciona al 100.
Go to the top of the page
 
+Quote Post
tetokilo
mensaje Nov 7 2018, 09:31 AM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 29
Agradecimientos: 7
Registrado: 13-November 17
Desde: USA
Miembro No.: 1,002,717
Pais:ar


CITA(slipher @ Oct 12 2018, 04:00 PM) *
Yo acabo de testear con la solución del compañero y todo perfecto ya tenia rato buscando una rom que funcionara y con esta ha vuelto a la vida el cel, muy agradecido. Incluso repare imei con el modelo M160 y funciona al 100.



no me sube senal .. luego de flash m160 y de desbloquear,
Go to the top of the page
 
+Quote Post
bbpinmatos
mensaje Nov 15 2018, 11:31 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 0
Registrado: 21-August 15
Desde: REPÚBLICA DOMINICANA
Miembro No.: 746,995
Pais:do


CITA(Hardin @ Jul 27 2018, 10:07 AM) *
Con esta versión -M153 11d- no conseguía quitar la cuenta, pero encontré esta forma...

1 - Actualizar OCTOPUS a la version 2.8.8 (o superior)

2 - Ir a la pestaña SUPPORT & OPTIONS (botón esquina superior izquierda)

3 - Ir a FILES DOWNLOADER (botón en el bloque del lado derecho)

4 - Buscar el archivo M16010b_00_OPEN_EU_OP_0102.oct y descargarlo

5 - Ir a la pestaña LG QUALCOMM (botón superior)

6 - Seleccionar el modelo M160 y en el bloque derecho seleccionar la pestaña MAIN

7 - En el bloque de texto seleccionan lo tres puntos [...] y buscan el archivo (del paso 4) de donde lo guardaron

8 - Con el cell en mod download dan al boton WRITE FIRMWARE y sale una advertencia de que degradar el software del equipo es peligroso (deben tener en cuenta que la version con la que me funcionó fue - M153 11d - no se si con alguna otra funcione)

Sale un log como este...

Opening "M16010b_00_OPEN_EU_OP_0102.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing tz...OK
Writing rpm...OK
Writing aboot...OK
Writing sbl1bak...OK
Writing tzbak...OK
Writing rpmbak...OK
Writing abootbak...OK
Writing sec...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing persist...OK
Writing laf...OK
Writing lafbak...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing factory...OK
Writing system...OK
Writing cust...OK
Writing BackupGPT...OK
Writing OP_T...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.8 Software version.

9 - Luego seleccionan el modelo M153 van a la pestaña ANDROID TOOLS (bloque derecho ultima pestaña)

10 - Y con el cell en modo Download dan RESET FRP LOCK

Sale un log como este...

Checking data...OK
Platform: LG Qualcomm
Selected port: COM914
Selected model: M153
Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
Reading info...
Model ID: LG-M160
IMEI: 354064-xx-xxxxxx-x
Android version: 6.0.1
Battery level: 18%
SW Version: M16010b
Mode: Emergency
Initializing flash...OK
SW version: LGM160AT-00-V10b-GLOBAL-COM-JAN-02-2017+0
Android version: 6.0.1
LAF Version: 1.1
Product ID: CB45S170824001788
IMEI: 354064-xx-xxxxxx-x
Target operator: GLOBAL
Hardware: rev_10
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...OK
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
If the phone hang on logo or is restarting afetr performing the operation, please re-flash it using the same or higher version of firmware
Performed by 2.8.8 Software version.

Y LISTO !!!



HOLA!

YO USE SU MÉTODO PARA QUITARLE LA CUENTA DE GOOGLE AL LG M153 11D PERO EL EQUIPO NO ESTABA DESBLOQUEADO Y AHORA NO ENCUETRO LA FORMA DE DESBLOQUEARLO.

LA OCTOPUS DICE QUE LO HACE PERO SIGUE BLOQUEADO.

ME PUEDE AYUDAR CON ESO?
Go to the top of the page
 
+Quote Post
aledesant52
mensaje Dec 18 2018, 05:17 PM
Publicado: #6

Maestro del Clan
***

Grupo: Miembros
Mensajes: 918
Agradecimientos: 1449
Registrado: 13-May 13
Desde: La Paz
Miembro No.: 470,032
Pais:bo


no lo hagan el m153 con esa flash porque lo deja con el nvm dañado y hasta ahorita no e encontrado como flashearlo de vuelta a m153, si alguien tiene ese archivo, compartalo porfavor


--------------------
Mis pequeños juguetes... SIGMA BOX, SETOOL FUSION, SMART CLIP, ZZKEY, Z3X, OCTOPUS+MEDUSA... Poco pero seguira creciendo

La peor de todas las armas... LA INTELIGENCIA...Solo depende como la uses
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a aledesant52 por su Colaboracion:
Hardin
johannesburgos
mensaje Jun 1 2019, 12:46 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 9
Agradecimientos: 7
Registrado: 25-August 11
Miembro No.: 246,360



Mode: Emergency
Model: M153
Read info...
Laf Protocol: 01000004
Model name: LG-M153
Software verion: M15311b
Android verion: 6.0.1
Target operator: CRK
Target country: US
Chipset: msm8909
IMEI: 354064086208376
Elapsed: 4 secs. --> (v9.59)

Phone mode is DOWNLOAD
Start reset FRP...
Laf Protocol: 01000004
Model name: LG-M153
Software verion: M15311b
Android verion: 6.0.1
Target operator: CRK
Target country: US
Chipset: msm8909
IMEI: 354064086208376
Detecting write method...
Init write method... fail
Init misc method... done
Init EXT4 ... done
Resetting frp...
FRP Reset done!
Elapsed: 79 secs. --> (v9.59)

z3x nitido
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a johannesburgos por su Colaboracion:
Brandon Andre
zombiesv
mensaje Jun 8 2019, 02:21 AM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 9
Agradecimientos: 4
Registrado: 19-March 16
Miembro No.: 809,461
Pais:ad


Como hago para volver ala rom anterior. Ya que me sale lg k4
Go to the top of the page
 
+Quote Post
zombiesv
mensaje Jun 15 2019, 09:11 AM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 9
Agradecimientos: 4
Registrado: 19-March 16
Miembro No.: 809,461
Pais:ad


No hagan este proceso su teléfono quedará dañado. Y no podrán liberar la red
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a zombiesv por su Colaboracion:
Hardin, joseantsime
Brandon Andre
mensaje Feb 29 2020, 10:00 PM
Publicado: #10

Miembro del Clan
*

Grupo: Miembros
Mensajes: 3
Agradecimientos: 3
Registrado: 12-September 18
Miembro No.: 1,069,777
Pais:mx


CITA(Hardin @ Jul 27 2018, 09:07 AM) *
Con esta versión -M153 11d- no conseguía quitar la cuenta, pero encontré esta forma...

1 - Actualizar OCTOPUS a la version 2.8.8 (o superior)

2 - Ir a la pestaña SUPPORT & OPTIONS (botón esquina superior izquierda)

3 - Ir a FILES DOWNLOADER (botón en el bloque del lado derecho)

4 - Buscar el archivo M16010b_00_OPEN_EU_OP_0102.oct y descargarlo

5 - Ir a la pestaña LG QUALCOMM (botón superior)

6 - Seleccionar el modelo M160 y en el bloque derecho seleccionar la pestaña MAIN

7 - En el bloque de texto seleccionan lo tres puntos [...] y buscan el archivo (del paso 4) de donde lo guardaron

8 - Con el cell en mod download dan al boton WRITE FIRMWARE y sale una advertencia de que degradar el software del equipo es peligroso (deben tener en cuenta que la version con la que me funcionó fue - M153 11d - no se si con alguna otra funcione)

Sale un log como este...

Opening "M16010b_00_OPEN_EU_OP_0102.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing tz...OK
Writing rpm...OK
Writing aboot...OK
Writing sbl1bak...OK
Writing tzbak...OK
Writing rpmbak...OK
Writing abootbak...OK
Writing sec...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing persist...OK
Writing laf...OK
Writing lafbak...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing factory...OK
Writing system...OK
Writing cust...OK
Writing BackupGPT...OK
Writing OP_T...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.8 Software version.

9 - Luego seleccionan el modelo M153 van a la pestaña ANDROID TOOLS (bloque derecho ultima pestaña)

10 - Y con el cell en modo Download dan RESET FRP LOCK

Sale un log como este...

Checking data...OK
Platform: LG Qualcomm
Selected port: COM914
Selected model: M153
Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
Reading info...
Model ID: LG-M160
IMEI: 354064-xx-xxxxxx-x
Android version: 6.0.1
Battery level: 18%
SW Version: M16010b
Mode: Emergency
Initializing flash...OK
SW version: LGM160AT-00-V10b-GLOBAL-COM-JAN-02-2017+0
Android version: 6.0.1
LAF Version: 1.1
Product ID: CB45S170824001788
IMEI: 354064-xx-xxxxxx-x
Target operator: GLOBAL
Hardware: rev_10
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...OK
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
If the phone hang on logo or is restarting afetr performing the operation, please re-flash it using the same or higher version of firmware
Performed by 2.8.8 Software version.

Y LISTO !!!

---------------------------------------------------------------------
todo a la perfeccion, pero se me quedo en inmei 0 procedi a reparar imei pero no levanto señal, despues volvi a hacer f4 pero sigue sin red :´l
alguna sugerencia, Mi Lg es igual 11-d de cricket...
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 usuario(s) está(n) leyendo este tema (1 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 18th April 2026 - 09:20 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +