ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

2 Páginas: V   1 2 >  
Closed TopicStart new topic
Liberacion Moto E 4a Xt1764
aztecacelular
mensaje Aug 22 2017, 06:01 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 285
Agradecimientos: 1221
Registrado: 17-December 09
Desde: cuernavaca mor. México
Miembro No.: 74,762



les comparto la forma de liberar este nuevo modelo de motorola E 4ta generacion
use NCK en modulo MTK solo hay que seleccionar el procesador MT6737M y le das direct unlock, conectas el equipo apagado y en segundos listo

aqui el log


Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM88)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM90)
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:97) Code : 2390677842702262
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.


--------------------
"algunos sueñan con el éxito, mientras otros se levantan y trabajan duro para obtenerlo"
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Aug 22 2017, 06:01 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
navy89
mensaje Aug 23 2017, 06:39 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 6
Agradecimientos: 6
Registrado: 15-July 11
Miembro No.: 231,165



CITA(aztecacelular @ Aug 22 2017, 06:01 PM) *
les comparto la forma de liberar este nuevo modelo de motorola E 4ta generacion
use NCK en modulo MTK solo hay que seleccionar el procesador MT6737M y le das direct unlock, conectas el equipo apagado y en segundos listo

aqui el log
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM88)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM90)
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:97) Code : 2390677842702262
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.



EL IMEI NO LO PERDIO? SIGUE TENIENDO EL MISMO?
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a navy89 por su Colaboracion:
jonna2159, robledo, skyovercloker
aztecacelular
mensaje Aug 24 2017, 01:24 PM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 285
Agradecimientos: 1221
Registrado: 17-December 09
Desde: cuernavaca mor. México
Miembro No.: 74,762



CITA(navy89 @ Aug 23 2017, 06:39 PM) *
EL IMEI NO LO PERDIO? SIGUE TENIENDO EL MISMO?


para reparar imei usamos la misma herramienta solo que se selecciona flash connection, colocas el imei y reparas. en segundos esta listo

aqui el log

Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM192)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM199)
Dumping data, wait.
Reading imei
IMEI[1]: *******80624327
IMEI[2]: fffffffffffffff
Backup saved: C:\Users\juaNOS\Documents\Android_MTK\nvram_backup\FLASH_MODE_NVRAM_MT6737M_*******80624327_fffffffffffffff_08_24_2017_13_18_5
.zip
Writing imei
IMEI[1] TO UPDATE:*******80624333
FORMAT EMMC FLASH : BEGIN: 0x9d80000 - LEN: 0x2000000
Wait untill phone will start charging.
All done.

Mensaje modificado por aztecacelular el Aug 24 2017, 01:32 PM


--------------------
"algunos sueñan con el éxito, mientras otros se levantan y trabajan duro para obtenerlo"
Go to the top of the page
 
+Quote Post
A continuacion 8 usuario(s) le Agradece(n) a aztecacelular por su Colaboracion:
alberto7891, Antonioxhell, cocoloscar, fabioius, jonna2159, monkee, robledo, tona12
fabioius
mensaje Aug 24 2017, 02:13 PM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 111
Agradecimientos: 2343
Registrado: 2-October 10
Desde: DF
Miembro No.: 137,990



en efecto testeado en 2 equipos diferentes todo al 100% unlock e ixxx


--------------------
[font="Comic Sans MS"][/font][size="3"][/size][color="#0000FF"][/color]IVAN UGALDE
Go to the top of the page
 
+Quote Post
zetzer
mensaje Sep 11 2017, 04:24 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 1
Registrado: 25-May 11
Miembro No.: 213,906



Esto necesita un aparato adicional/extra? o solo es por cable USB?
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a zetzer por su Colaboracion:
robledo
mauricioxxx
mensaje Sep 11 2017, 04:31 PM
Publicado: #6

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 670
Agradecimientos: 1236
Registrado: 17-June 15
Miembro No.: 727,736
Pais:bo


CITA(zetzer @ Sep 11 2017, 05:24 PM) *
Esto necesita un aparato adicional/extra? o solo es por cable USB?

la Box y USB normal
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a mauricioxxx por su Colaboracion:
robledo
aztecacelular
mensaje Sep 24 2017, 03:16 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 285
Agradecimientos: 1221
Registrado: 17-December 09
Desde: cuernavaca mor. México
Miembro No.: 74,762



tambien funciona para xt1772 moto e4 plus
para liberar e ime1

mismo proceso
comprobado


log de reparacion de ime1

Selected connection metod: Flash Connection
Exe version: NCKDongle AndroidMTK 2.5.8.0
Selected phone: MT6737M
Action : IMEI REPAIR.
IMEI[1] for write : xxxxxxxx1746488
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM4)
Dumping data, wait.
Reading imei
IMEI[1]: xxxxxxxx1746408
IMEI[2]: xxxxxxxx1746408
Backup saved: C:\Users\juaNOS\Documents\Android_MTK\nvram_backup\FLASH_MODE_NVRAM_MT6737M_xxxxxxxx1746408_xxxxxxxx1746408_09_24_2017_15_11_4
.zip
Writing imei
IMEI[1] TO UPDATE: xxxxxxxx1746488
FORMAT EMMC FLASH : BEGIN: 0x9d80000 - LEN: 0x2000000
Wait untill phone will start charging.
All done.


--------------------
"algunos sueñan con el éxito, mientras otros se levantan y trabajan duro para obtenerlo"
Go to the top of the page
 
+Quote Post
A continuacion 4 usuario(s) le Agradece(n) a aztecacelular por su Colaboracion:
jesusadrian2412, Markos22n, robledo, shirohigue
MEMOSALVATIERRA
mensaje Oct 31 2017, 04:38 PM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 81
Agradecimientos: 617
Registrado: 4-September 10
Desde: naucalpan
Miembro No.: 130,320



CITA(aztecacelular @ Aug 22 2017, 06:01 PM) *
les comparto la forma de liberar este nuevo modelo de motorola E 4ta generacion
use NCK en modulo MTK solo hay que seleccionar el procesador MT6737M y le das direct unlock, conectas el equipo apagado y en segundos listo

aqui el log
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM88)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM90)
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:97) Code : 2390677842702262
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.

excelente colega, sale de una y con imei original
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a MEMOSALVATIERRA por su Colaboracion:
robledo
jorsh
mensaje Nov 1 2017, 12:31 PM
Publicado: #9

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 358
Agradecimientos: 805
Registrado: 11-February 10
Miembro No.: 84,646



yo probe con el motorola e4 de verizon pero dice que es qualcomm no me lo detecto como mtk
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a jorsh por su Colaboracion:
robledo
sanmartin
mensaje Nov 3 2017, 07:28 PM
Publicado: #10

Maestro del Clan
***

Grupo: Miembros
Mensajes: 756
Agradecimientos: 1550
Registrado: 29-August 13
Miembro No.: 509,470
Pais:mx


Se conecta apagado con el cpu mt6737m y unlock sale sin problemas testeado al 100%








Mensaje modificado por sanmartin el May 23 2018, 07:21 PM
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 7 usuario(s) le Agradece(n) a sanmartin por su Colaboracion:
gore, lahelo88, orbitacell, Pekelead, robledo, tecniperr, WILLFREDI
jonna2159
mensaje Nov 13 2017, 04:42 PM
Publicado: #11

Miembro del Clan
*

Grupo: Miembros
Mensajes: 16
Agradecimientos: 14
Registrado: 29-June 16
Miembro No.: 844,644
Pais:mx


CITA(jorsh @ Nov 1 2017, 01:31 PM) *
yo probe con el motorola e4 de verizon pero dice que es qualcomm no me lo detecto como mtk



es por que el de veraizon no trae imei trae meid y no es xt1764 es xt1766
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a jonna2159 por su Colaboracion:
robledo
ConejiToO27
mensaje Nov 17 2017, 02:01 PM
Publicado: #12

Miembro del Clan
*

Grupo: Expulsados
Mensajes: 214
Agradecimientos: 844
Registrado: 6-August 16
Desde: Republica Dominicana
Miembro No.: 859,185
Pais:do


CITA(jonna2159 @ Nov 13 2017, 05:42 PM) *
es por que el de veraizon no trae imei trae meid y no es xt1764 es xt1766


amigo.

XT1766 SPRINT

XT1767 VERIZON : se desbloquea mediante codigos, he desbloqueado 10 el codigo lo he pagado a 1.95 y 2.5 usd

full señal para datos y llamada
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a ConejiToO27 por su Colaboracion:
robledo
joedl
mensaje Nov 30 2017, 08:11 PM
Publicado: #13

Miembro del Clan
*

Grupo: Miembros
Mensajes: 76
Agradecimientos: 130
Registrado: 19-March 15
Desde: Mexico
Miembro No.: 699,491



amigos para evitar perder su serial y tener que reparar solo ahi que darle read codes.

en cuestion de segundos les envia el codigo la nck.

testeado en un moto e4 con android 7.1.1

saludos.


Fichero(s) Adjunto(s)
 


--------------------
Mis Nenas Por El Momento: Sigma Box Pack 1, Pack 2, Pack3, Pack 4-- Octoplus Pro Activaciones LG, Samsung, FRP, JTag, Chimera Full --- Z3X Activacion Samsung Pro --- NCK Box full --- GCPro --- Infinity Dongle, Furious Gold Full, XTC 2 CLIP Con Power Adapter ---- Clan GSM
Go to the top of the page
 
+Quote Post
A continuacion 11 usuario(s) le Agradece(n) a joedl por su Colaboracion:
alegre11, baldamiz, cabuvis, davis.710, elpontys, luisn, polanco, raymut, ricardocen28, robledo, yownkow
romualdo
mensaje Dec 5 2017, 07:57 PM
Publicado: #14

Miembro del Clan
*

Grupo: Miembros
Mensajes: 29
Agradecimientos: 37
Registrado: 4-October 12
Miembro No.: 390,694



Muchas gracias amigos solo cabe comentar que en mi caso para que se aplicara la reparación de imei tuve que hacer un hard reset

Mensaje modificado por romualdo el Dec 5 2017, 07:58 PM
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a romualdo por su Colaboracion:
Charizardo_18, robledo
wfantasma
mensaje Dec 11 2017, 03:50 PM
Publicado: #15

Miembro del Clan
*

Grupo: Miembros
Mensajes: 10
Agradecimientos: 58
Registrado: 23-April 09
Miembro No.: 33,649



Hola buenas tardes, alguien que pueda proporcionarme un backup del firmware de este modelo? (xt1764) me trajeron uno sin imei, sin baseband y con un firm diferente del que traia de fabrica (at&t mexico)
Gracias de antemano.
[attachment=281244:Screensh...1_135556.png]
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a wfantasma por su Colaboracion:
robledo
bitcho
mensaje Dec 15 2017, 09:11 PM
Publicado: #16

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 362
Agradecimientos: 907
Registrado: 2-January 16
Miembro No.: 784,662
Pais:mx


Furous con OTSmart tambien sale a la 1ra seleccionan modelo zte blade a410 y le dan a remove simlock conectan apagado y el recuadro que sale le dan que si
tarda como 5 segundos todo el proceso
Go to the top of the page
 
+Quote Post
A continuacion 4 usuario(s) le Agradece(n) a bitcho por su Colaboracion:
FHERVATOR, lapa_clan, NECKTAR, robledo
Joaquin Ruiz
mensaje Dec 28 2017, 06:07 PM
Publicado: #17

Miembro del Clan
*

Grupo: Miembros
Mensajes: 9
Agradecimientos: 96
Registrado: 14-June 16
Miembro No.: 839,321
Pais:ad


CITA(bitcho @ Dec 15 2017, 08:11 PM) *
Furous con OTSmart tambien sale a la 1ra seleccionan modelo zte blade a410 y le dan a remove simlock conectan apagado y el recuadro que sale le dan que si
tarda como 5 segundos todo el proceso



.::::::::::::::::::::::::::::::::::.

confirmo el metodo por el compañero, sale con Furious Gold paquete 6 y modulo OTSMart, seleccionamos el modelo A410 y sale rapido.
saludos.


Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 5 usuario(s) le Agradece(n) a Joaquin Ruiz por su Colaboracion:
Aguilucha, cdma.gsm.iden, FHERVATOR, JMAP, robledo
JaimeU14
mensaje Dec 29 2017, 02:04 PM
Publicado: #18

Miembro del Clan
*

Grupo: Miembros
Mensajes: 20
Agradecimientos: 110
Registrado: 5-December 15
Miembro No.: 777,284
Pais:gt


CITA(ConejiToO27 @ Nov 17 2017, 03:01 PM) *
amigo.

XT1766 SPRINT

XT1767 VERIZON : se desbloquea mediante codigos, he desbloqueado 10 el codigo lo he pagado a 1.95 y 2.5 usd

full señal para datos y llamada


como le ingresas el código amigo?
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a JaimeU14 por su Colaboracion:
robledo
0kull1998
mensaje Jan 9 2018, 08:25 AM
Publicado: #19

Miembro del Clan
*

Grupo: Miembros
Mensajes: 5
Agradecimientos: 3
Registrado: 30-August 15
Desde: Peru
Miembro No.: 749,510
Pais:pe


CITA(aztecacelular @ Aug 24 2017, 01:24 PM) *
para reparar imei usamos la misma herramienta solo que se selecciona flash connection, colocas el imei y reparas. en segundos esta listo

aqui el log

Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM192)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 15010051453133 : 000000000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM199)
Dumping data, wait.
Reading imei
IMEI[1]: *******80624327
IMEI[2]: fffffffffffffff
Backup saved: C:\Users\juaNOS\Documents\Android_MTK\nvram_backup\FLASH_MODE_NVRAM_MT6737M_*******80624327_fffffffffffffff_08_24_2017_13_18_5
.zip
Writing imei
IMEI[1] TO UPDATE:*******80624333
FORMAT EMMC FLASH : BEGIN: 0x9d80000 - LEN: 0x2000000
Wait untill phone will start charging.
All done.






Hola colega, qie version de la nck se utiliza para ese modelo
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a 0kull1998 por su Colaboracion:
robledo
jero8
mensaje Jan 13 2018, 01:40 PM
Publicado: #20

Miembro del Clan
*

Grupo: Miembros
Mensajes: 109
Agradecimientos: 288
Registrado: 21-May 09
Miembro No.: 38,333



CITA(jorsh @ Nov 1 2017, 01:31 PM) *
yo probe con el motorola e4 de verizon pero dice que es qualcomm no me lo detecto como mtk

La version de E4 de verizon es procesador qualcom, se tiene que procesar como tal, saludos
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a jero8 por su Colaboracion:
robledo

2 Páginas: V   1 2 >
Closed TopicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 29th March 2024 - 12:52 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +