Desbloqueo A466t Aporte Opciones

[cnovaseq]

Debemos abrir el modulo Android MTK
-luego seleccionan el procesador MT6580
-se van a la pestaña unlocking y seleccionan modo FLASH Mode
-la operacion se hace con Direct Unlock (si seleccionan Read INFO(codes) no funciona el generado)
-conectan el celular apagado y listo 5 seg a cobrar

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.3
Selected model: MT6580
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) TOSIBA 0x303038473730
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 11010030303847 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM30)
OTP IMEI: 014731000284954
MODEL FROM PROINFO: A466T-2ALZCA1
SECRO FROM PROINFO: X3D0UD01BS10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:3) Code : 25953630
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 25953630
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.