Aporte Frp Zuum Vibe Con Nck Dongle Opciones

[rosskarpozzo]

Hola amigos, este modelo sale de forma sencilla con NCK Dongle en version 2.5.8.9

1. Abrimos NCKDongle AndroidMTK.
2. Seleccionamos FRP Pattern privacy.
3. Seleccionamos el cpu MT6580.
4. Reset FRP.
5. Conectamos el telefono apagado. En mi caso me lo detecto mejor dejando presionado vol -.
6. Listo.

Exe version: NCKDongle AndroidMTK 2.5.8.9
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM6)
Boot mode: Brom
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 460001154d32584e5c
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.