Remover Codigo De Proteccion Anti Robo Lanix S106 Opciones

[tony mtz898]

HOLA QUE TAL AMIGOS DEL FORO LES COMPARTO

ME LLEGO UN LANIX S106 CON CODIGO DE PROTECCION ANTI ROBO
Y LA SOLUCION ES CON NCK BOX

1.- APAGAR EL EQUIPO

2.- ABRIR NCK BOX ANDROID MTK

3.- SELECCIONAR LA PESTAÑA SERVICE

4.- SELECCIONAR PROCESADOR M76572_MCC

5.- SELECCIONAR META MODE REBOOT

6.- CLICK EN RESET PRIVACY

7.- LISTO CODIGO REMOVIDO CON EXITO
-------------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM31)
Dumping data, wait.
Value found, procesing[010c][00460000]
Resetting phone.
FORMAT EMMC FLASH : BEGIN: 0x4a940000 - LEN: 0x72000000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done.


100% TESTEADO