Aporte Hard Reset Haier G30 Sin Botones Nck Dongle Opciones

[mardoescobedo]

Para hard reset de un Haier G30 sin botones

1o. Abrir CKDongle AndroidMTK 2.5.7.0 en MAIN darle en boot info
2o. Seleccionar CPU MT6572 que es lo que detectó en boot info
3o. Luego en la pestaña format backup en format option seleccionar Format Userdata
4o. Esperar y listo.

Log.

Action : Format UserData.
Selected 0-By CPU:MT6572_EMMC
Exe version: NCKDongle AndroidMTK 2.5.7.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM33)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x533130303034
EMMC FW VERSION: 08:00:00:00:00:00:00:00
EMMC CID: 70010053313030 : 000000000000000000
EMMC UA SIZE: 0xe4000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe4c00000 [3.574 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM103)
Detecting format adress....wait!

Starting generic userdata format...!
FORMAT EMMC FLASH : BEGIN: 0x45d40000 - LEN: 0xe200000
FORMAT EMMC FLASH : BEGIN: 0x53f40000 - LEN: 0x8f7c0000
All done.