Solo Aquí Actualizaciones De Setool Box, Solo Postear Actualizaciones - el resto es eliminado Opciones

[Eliminado_marranogsm_*]

desde este enlace podemos descargar la version 0.915032

http://www.4shared.com/file/83343580/1c44b03e/v0915032.html

[Anunciante Autorizado]

[FixUpCenter]

v0.915033

- "gnd"-type testpoint was broken,fixed (thx to aamir zia for report)
- a2 loaders updated to current version
- bypass packages updated
- some minor not important changes

En la version 32 GND del testpoint no servia correctamente, ahora en esta esta arreglado
Los loaders para SEMC A2 estan agregados a las versiones corrientes
pero no hay cambios mas importante
Descarge desde el soporte

[puhig]

desde aquí se puede bajar el v0.915033 :

http://rapidshare.com/files/200127892/v0.915033.rar

[clini-cell unloc...]

señores mirando el soporte ya salio la actualizacion de setool v0.915034

http://rapidshare.com/files/200413323/v0.915034_2_.rar | 22260 KB

Fichero(s) Adjunto(s)

 2gt89wl.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 60.28k ) Número de descargas: 0

 

[Eliminado_WILUNLOCK___*]

NEW UPDATED FOR SETOOL v0.915034



- pda support was broken,fixed
- fixed fs operations for pnx5230 on serial interfaces
- added timer for new-type testpoints processing
- minor gui fixes/addons

[Eliminado_UNLOCKME2009_*]

si tu abres WWW.4SHARED.COM y pones v0.915034 y le das en SEARCH te sale lo que buscas, que facil es buscar verdad?

aqui igual te dejo el link

http://www.4shared.com/network/search.jsp?...Name=v0.915034+

busquen por favor busquen

Mensaje modificado por UNLOCKME2009 el Feb 27 2009, 05:17 PM

[Eliminado_WILUNLOCK_*]

v0.915035

- updated model list
- updated bypass packages
- added support for db3200 cid49,cid51,cid52 alternative security bypass
- added support for db3200,db3210 cid53 flashing,gdfs operations,etc
- added support for db3200,db3210 cid53 unlocking
(via signature server, at the moment 2 credits required)
1. select phone model
2. mark "signed mode", "do full unlock instead usercode reset"
3. press "unlock/repair"

- added CORRECT PDA ACPU EROM recovery support for all PDA.
1. select correct PDA model
2. find corresponding EROM in dist\eroms\, add it to firmware area
3. select correct com/ufs port
4. press recovery
5. connect turned off phone
6. reflash phone via USB with normal firmware
- few minor bugs fixed/added
- few gui enhancements








Mensaje modificado por WILUNLOCK el May 4 2009, 11:33 AM

Fichero(s) Adjunto(s)

 update_s... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 69bytes ) Número de descargas: 87
 update_s... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 78bytes ) Número de descargas: 65

 

[Eliminado_WILUNLOCK_*]

SETOOL v0.915036 RELEASED

--------------------------------------------------------------------------------

SETOOL v0.915036 RELEASED

- fixed phonebook extraction for some old models
- by accident db3200 cid49,51,52 alternative bypass was broken,fixed

Fichero(s) Adjunto(s)

 v0.91503... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 51bytes ) Número de descargas: 170

 

[alexander guarin...]

modelo de actualización de la lista
- Paquetes de actualización de circunvalación
- Añadido soporte para db3200 cid49, cid51, cid52 alternativa de derivación de seguridad
- Añadido soporte para db3200, db3210 cid53 parpadear, gdfs operaciones, etc
- Añadido soporte para db3200, db3210 cid53 desbloqueo
(a través de la firma del servidor, en el momento requerido 2 créditos)
1. seleccionar el modelo de teléfono
2. marca ", firmado el modo", "hacer lugar usercode desbloquear completo restablecimiento"
3. pulse "desbloquear y reparación"

- Correcto añadido ACPU PDA EROM de apoyo a la recuperación de todos los PDA.
1. seleccionar el modelo correcto de PDA
2. encontrar en el correspondiente EROM dist \ eroms \, añadirlo a la zona de firmware
3. seleccione correcto es / ufs puerto
4. recuperación de prensa
5. conectar teléfono apagado
6. reflash teléfono normal a través de USB con el firmware
- Algunos pequeños errores corregidos / añadido
- Algunas mejoras

[essteban]

aca esta la ultima actualisacion de setool3





dar gracias lo dise todo

Mensaje modificado por essteban el May 29 2009, 04:16 PM

Fichero(s) Adjunto(s)

 link.txt... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 37bytes ) Número de descargas: 133

 

[Daimoku]

v0.915037

- model list updated
- signed mode A2 loaders updated to latest versions
- some not important bugfixes

rapidshare FULL SETUP LINK:
http://rapidshare.com/files/238624497/v0.915037.rar

Por supuesto, para el que tenga la caja lo baja del soporte...

[paleje]

SETOOL v0.915038
- timeout for A2 flashing increased, that fixed error
"can't get NET header" on some models in the end of filesystem flashing
- unsigned mode A2 loaders updated to latest versions
- some not important bugfixes

http://rapidshare.com/files/241133036/v0.915038.rar

[essteban]

Buenas amigo martyn2010 podrías modificar el LINK ya que esta roto y no podemos descargar la última versión de la settol 3

amigo bajala del soporte




igual aca te la dejo http://www.megaupload.com/?d=NGY8FGH7

Mensaje modificado por essteban el Jul 19 2009, 08:16 PM

[richitar18]

signed mode S1 loaders updated to latest versions
- some not important bugfixes and addons


http://rs583.rapidshare.com/files/253921681/v0.915039.rar

[clini-cell unloc...]

ya salio una nueva actualizacion hoy de setool

v0.915039
Thursday, 23 July 2009

- signed mode S1 loaders updated to support latest AID versions
- some not important bugfixes and addons

[Eliminado_armandosan_*]

el link esta roto

aca esta con gusto

Mensaje modificado por armandosan el Jul 23 2009, 11:40 AM

Fichero(s) Adjunto(s)

 v0.91504... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 29.33mb ) Número de descargas: 305

 

[Eliminado_solpuntocell_*]

dejo otro esta bueno porque lo acabo de usar
http://rapidshare.com/files/259119247/v0.915040.rar

es el mismo pero a mi me funciono, acabo de descargarlo de hay.

Mensaje modificado por solpuntocell el Jul 23 2009, 11:56 AM

[ruroni925]

sadly to say, s1 signature server down.
a1/a2 servers are online, but for a2 users MUST check "disable flash mode activation for semc a2" and use modem drivers.

modem drivers can be found in any pcsuite installation for any semc a2 phone.
i will gather modem drivers in one pack asap.

sorry for any inconveniences, that if life and it hurts.

********************************************************************************
*****************************************

Lamentablemente el servidor de S1 esta caido
Los servidores de A1/A2 estan online, pero para los usuarios de Semc A2 deben de tener activada la opcion "disable flash mode activation for semc a2" en el setting y usar los drivers de modem

Los drivers de modem los puedes encontrar desde los instaladores de PCsuite de telefonos SEMC A2
Trataremos de reunir los drivers de modem lo mas antes posible y hacer un pack

Disculpas por las molestias

[ruroni925]

Me es grato comunicar lo siguiente

s1 server is working now.
sadly to say, srv02 is down forever.
all users transferred to srv01.
if you had account on srv02 and receive now "bad username/password", then add "dup_" to username, i.e.
was "user01" - became "dup_user01"

------------------------------------------------------------------------------------------------------------------------------

El servidor de S1 esta trabajando nuevamente
Lastimosamente, el server 02 esta caido para siempre (cerrado)
Todos los usuarios que hayan tenido cuentas en el servidor 02 han sido pasados al server 01
Si tu tenias una cuenta en el servidor 02 y recibes ahora un mensaje "bad username/password", añade esto antes de colocar tu username (tu nombre de usuario) "dup_"
ejemplo: si tu user era "user01" ahora pasara a ser "dup_user01" (logicamente sin las comillas)

Saludos

[Eliminado_Saw_*]

v0.915043

- added RESET mode for db200x,db201x,db2020 phones.
after such operation phone will became developer (brown) state.
you can do anything with phone (write gdfs, unlock,etc) while phone
in that state.

you can find all details in FAQ

- as side effect, pda emptyboard fill now enabled.

- added PATCH unlock for S1 phones (new security, old security, etc)
notice, that phones must have NOT TAMPERED security zone.
you can find all details in FAQ

please note, that it is PATCH unlock and after fullflash
phone will be locked again.

same thing applies to possible incorrect operation - just flash phone.


- as side effect, added possibility to flash unsigned firmware in any S1 phone.
that allow users to repair phones with damaged trim area.
that require s1 signature server, hopefully it will be online one day.

rapidshare FULL SETUP LINK

Code:

that is very-very beta software.
s1 patch unlock should be tested throughly.
we tested t303,t250,t280,r300,w302 but not other models,though they
should be supported just fine.

because of that, during short beta testing period price for
s1 security bypass, db200x,db201x,db2020 reset operation will be ZERO credits.

after short beta testing period we will setup corresponding price






FAQ DB200X,DB201X,DB202X





q: my db2020 phone had totally damaged gdfs and i do not want to replace flash chip. what to do ?

a:

starting from release v0.915043 testpoint procedure obsolete and replaced with RESET feature.

you need use complex testpoint procedure:

1. it is only and only for professionals. users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select any db2020 model.
5. press "TP STAGE #1". read instructions and execute them.
6. press "TP STAGE #2". read instructions and execute them.
7. phone is BROWN now.
8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
9. if flashing went fine, flash db2020 erom with needed CID.
10. phone now retail and repaired. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.

after SETOOL2 db2020 testpoint procedure phone FULLY
working in "alternative security bypass" mode without ANY restrictions.

note.
if you wrote bad erom (erom cid < otp cid) - you should start testpoint procedure from STAGE #2.

q: my db201x phone had totally damaged seczone, but gdfs is valid. i do not want to replace flash chip. what to do ?

a:
starting from release v0.915043 testpoint procedure obsolete and replaced with RESET feature.

you need use complex testpoint procedure:

1. it is only and only for professionals. users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select any db201x model.
5. press "TP STAGE #1". read instructions and execute them.
6. phone is BROWN now.
7. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
8. if flashing went fine, flash db201x erom with needed CID.
10. phone now retail and repaired. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.
W200 testpoint is VALID for ALL DB201x phones.

after SETOOL2 db201x testpoint procedure phone FULLY
working in "alternative security bypass" mode without ANY restrictions.

note.
if you wrote bad erom (erom cid < otp cid) - you should start testpoint procedure from STAGE #2.

q: my db201x phone have totally damaged gdfs and i do not want to replace flash chip. what to do ?

a:
starting from release v0.915043 that can be fixed with RESET feature.

sorry, setool2 can not help you in that case without emptyboard fill procedure.


q: how i can repair any software problem in db200x/db201x,db2020 phone ?
phone totally damaged, identify not working, gdfs is corrupted, erom is absent, etc.

a:
that feature require release >= v0.915043.

1. make sure you have needed quantity of credits on your account
2. select proper model
3. on settings check only "signed mode (using server)"
4.
if phone db200x,db201x select COM/UFS as interface.
if phone is db2020 - you can select COM/UFS/USB as interface.
5. press "recovery".
6. if phone hardware okay (flash chip,ram,etc) - phone will be reset to developer status (brown)
7. now proceed as usual ( tp repair step 6) - write gdfs,erom,whatsoever




FAQ S1 PHONES






q: what is that fuzz about s1 patch unlock ? what is difference from full unlock?

a:
s1 patch unlock feature require release >= v0.915043.
1. patch unlock is NOT permanent, it will be removed if you flash phone and you need to repeat it again
2. s1 patch unlock will NOT fix damaged security zone and REQUIRE valid security zone.
3. to use s1 patch unlock you need credits
4. procedure as follows

- select PROPER model (that is extremly important)
- on settings check BOTH "signed mode (using server)" AND "use alternative security bypass"
- select desired interface (usb preferred for neptune phones)
- press unlock

q:
i had flashed s1 phone and credits were spend from my account ??? why????
i had readed flash part from s1 phone and credits were spend from my account ??? why????

a:

you had checked "use alternative security bypass" option, that require credits.
that feature is only and only for very special cases, like restoring completely damaged trim area and other very specific requirements