Solo Aquí Actualizaciones De Setool Box, Solo Postear Actualizaciones - el resto es eliminado Opciones

[ruroni925]

v0.915017

- on some PNX5230 CID combination unlock by patch produced 5-locks
units with "err:19" message. that is fixed now
- k600 loader produced weird version output, that is fixed.
- added trim area images for completely killed a2 phones
(ta_forceopen err: 0006)

flash them as firmware. please note, that k850 trim area image only
working for K850, while for any other semc a2-phone
Shinobu_TA.ssw will do job just fine.

also please note, that for 100% normal work after trim area repair you
must full flash phone, then write gdfs package from normal working phone,
finally you must unlock phone.

i almost sure, thread with gdfs packages for a2 phone will appear soon.

---------------------------------------------------------------------------------------
traduccion
---------------------------------------------------------------------------------------

v0.915017

- en algunos unlock de PNX5230 producen los 5 candados cerrados con un mensaje de error "err:19". este problema a sido solucionado.
- el loader (arranque) del k600 produce una extraña salida que se estanca alli.este problema a sido solucionado.
- imágenes de área añadidas para los telefonos A2 completamente muertos (con error (ta_forceopen err: 0006))

flashee con este firmware. por favor, fijate que esta es una imagen solamente para que trabaje con el k850,
mientras para cualquier otro teléfono semc A2 el archivo Shinobu_TA.ssw trabaja perfectamente

también por favor note, que para el 100 % del trabajo, después de la reparación de área, usted debe flashear el teléfono completamente, luego escribir el paquete de gdfs del teléfono trabajado, finalmente usted debe liberar el teléfono

el enlace con los paquetes de gdfs para los teléfonos A2 aparecera pronto.

saludos

[Anunciante Autorizado]

[Eliminado_THE GHOST_*]

actualizacion

--------------------------------------------------------------------------------

v0.915018

- security backup was saved with wrong script command, fixed,
thx to gbluez for reporting.


http://rapidshare.com/files/161507407/v0.9...o_v0.915018.exe

[ruroni925]

v0.915019

- possibility to repair total damaged a2 phones (err: 060101)
- latest bypass packages added
- misc bugfixes

please note.
there is common now to make mirrrors and etc of
setool2 updates.

be content to know, that i do NOT guarantee that ANY of that
mirrors NOT contains viruses,mailwares,whatever.

the ONLY 100% genuine updates are on support area and in that thread.

*********************************************************

Traduccion:
v0.915019

- Posibilidad de reparar daños totales en telefonos A2 (err: 060101)
- Actualizado y agregado los paquetes bypass
- Reparados problemas diversos

Nota:
Es muy comun ahora que hayan muchos links de descargas del software actualizado de setool2
No garantizamos el contenido de estos contenidos o que no contengan virus, mailware, etc
Las actualizaciones 100% genuinas estan en el area de soporte

[puyatel]

v0.915019


link : http://rapidshare.com/files/162752464/v0.915019.exe
Listo para Usar sin la 16

[Eliminado_Ary Braga_*]

v0.915020

- solved issue with lg kf75x phones with '01xxxx' IMEIs
such phones will be hanled and recognized automatically, but
you must manually enter generated unlock code.
unlock code can be entered by typing 2945#*750#
(in some cases, it will not work until you flash generic (open) firmware)
- latest bypass packages added
- misc bugfixes

http://rs572.rapidshare.com/files/16470105...o_v0.915020.exe

[ruroni925]

Traduccion

v0.915020

- Solucionado los problemas con los telefonos LG KF75X que empiezan con imei '01xxxx', el dispositivo va a ser
reconocido, pero tu debes de ingresar el codigo de liberacion generado de manera manual
el codigo de liberacion (unlock) puede ser ingresado al telefono escribiendo 2945#*750#
(en algunos casos si esto no funciona debes de flashear tu telefono con el firmware del soporte)
- Ultimos "Bypass packages" agregados
- corregidos algunos problemas menores

Saludos

[Eliminado_GeorgeEcuador_*]

SETOOL Update v0.915021

v0.915021

- issue with some rare semc A2 phones,which failed to unlock, should be solved
- latest bypass packages added
- misc bugfixes

DESCARGAR

[ruroni925]

SETOOL Update v0.915021

- Se a solucionado el problema de unlock (liberacion) con algunos extraños telefonos SEMC A2.
- Se a agregadp los ultimos Bypass packages
- se han arreglado problemas menores



Saludos

[Eliminado_GeorgeEcuador_*]

SeTool3 v0.915025

- reintroduced direct unlock for telcel lg kf750/kf755
- added support for sagem my750x (experimental,released to test and fix)
- added support for lg kf757,lg ks520 (experimental,released to test and fix)
- added signed mode for locosto,neptune semc odm phones
"signed mode" should be checked
signed flashfiles should be used (uploaded on support)
possible flashing,userlock reset,total call time reset
network unlock not enabled (will be done later, via server)

note ! not all semc odm phones support USB (only latest)
note ! most odm phones in signed mode will work stable only on 460800 baudrate
note ! backups of trim area, made in signed and in unsigned mode
ARE NOT EXCHANGEABLE !!!!

- removed auto-ignition for semc odm phones when using 4in1 cable,
use manual ignition - that will eliminate troubles with booting that phones.
- latest bypass packages added
- misc bugfixes
- a lot of bugs, need to find and eliminate

DESCARGAR


experimental - means feature is NOT TESTED AT ALL ON HARDWARE.
if you fear to damage your phone - DO NOT USE EXPERIMENTAL features.

[Eliminado_GeorgeEcuador_*]

Setool v0.915026

- fixed db201X recovery bug
- fixed nasty cosmetic bug in general unlock procedure
- still should be more bugs

FULL SETUP LINK


rapidshare 025-026 UPDATE LINK

[Eliminado_GeorgeEcuador_*]

v0.915027

- fixed cosmetic db2xxx gdfs write bug
- fixed bug with interface switching
- tested,fixed and approved support for lg db3200 cid54 phones
- lowered speed for locosto-based phones in alternative bypass mode
- removed experimental support for sagem a2 cid185,cid186 phones.
- added latest rest bypass packages

file already at Setool support www.setool3.net and

rapidshare 026-027 UPDATE (VERY SMALL SIZE) : http://rapidshare.com/files/17562276..._v0.915027.exe
rapidshare FULL SETUP : http://rapidshare.com/files/175622765/v0.915027.rar

[Eliminado_GeorgeEcuador_*]

v0.915028
- fixed critical bug with unsigned unlocking of r306 phone.
- added S1 erom collection, flash in UNSIGNED mode
- added latest rest bypass packages








rapidshare 027-028 UPDATE (VERY SMALL SIZE) LINK
rapidshare FULL SETUP LINK

[ruroni925]

v0.915029

- a2 flashing speed increased ~15%
- enabled error correction protocol for semc a2 phones
- again lowered altbypass speed of locosto-based phones to 460800
- misc unimportant changes/cosmetic bugfixes

v0.915029

- Velocidad de flasheo en los telefonos A2 incrementada en un 15%
- Se activa un error de conexion en los telefonos SEMC A2
- Bajamos nuevamente la velocidad de los telefonos locosto a 460800
- errores sin importancia cambios/presencias reparados

[faviuz]

links para descargar actualizacion

http://rapidshare.com/files/177322757/v0.9...o_v0.915029.exe

http://rapidshare.com/files/177322755/v0.915029.rar

[DiGiSYS]

:| nuevo updt

CÓDIGO

v0.915030

- csca unlock was broken, fixed

rapidshare 029-030 UPDATE (VERY SMALL SIZE) http://rapidshare.com/files/177837520/v0.9...o_v0.915030.exe
rapidshare FULL SETUP http://rapidshare.com/files/177837521/v0.915030.rar

Mensaje modificado por DiGiSYS el Dec 29 2008, 10:10 AM

[orobas]

s1 network unlock enabled for both servers.

that means, users can unlock locosto-based semc phones with "bugfixed mcu"
and neptune-based phones.

to make full unlock user should check both
"signed mode" and "do full unlock instead usercode reset" settings.

first stage (signature calculation) will consume 2 credits.
second stage (unlock) requires at least 1 credit on account, but will NOT consume credits.

service NOT working all 24 hours, so try your luck...:-)

ps.
big thanks goes to my friend eerchant, without him implementation of s1 unlock will take ages


Originaly published by the_laser here:

[Eliminado_mago_*]

ultima actualización acá,

espero y les sirva

v0.915030

Mensaje modificado por mago el Jan 6 2009, 06:19 PM

Fichero(s) Adjunto(s)

 v0.91503... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 20.89mb ) Número de descargas: 374

 

[Eliminado_papusoft_*]

copy and paste

v0.915031

- officially approved support for sagem a2 cid185,cid186 phones.
die,kukuruzer (and other shit) stealers
(all you can do is steal and use ready stolen thing)
- added ECC mode selection for A2 phones.
"mode 0" required for phone,damaged by kukuruzer (and other shit)
for normal firmwares "mode 1" is required.
- fixed many minor and major bugs.
- added many minor bugs maybe not

http://rapidshare.com/files/189283384/v0.915031.rar

ps.
please do not forget, you need to check "signed mode" for non-semc a2.

Mensaje modificado por papusoft el Jan 25 2009, 01:14 PM

[gustavhn]

Ese link esta roto usen este para la version 915031

http://www.4shared.com/file/82616089/6ad72f34/v0915031.html

[Eliminado_MJAVIER_*]

v0.915032

- fixed "lg ku580" unlock bug
(after unlock phone hangs on "lg logo" and repair flash was needed)
- some minor gui enhancements

Mensaje modificado por ruroni925 el Jan 30 2009, 06:10 PM