I9300 Solo Llamadas De Emergencia Opciones

[scorpiogsm]

Bienvenido en Octoplus/Octopus Box Samsung software versión 2.2.5
-----------------------------------------------------------------------------------
To connect GT-I9300 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Reboot phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM13
Modelo seleccionado: GT-I9300
Searching for a phone. Please wait...
Phone found.
Modelo del teléfono detectado: GT-I9300
Fecha de creación del firmware: Tue Dec 16 22:27:02 KST 2014
PDA version: I9300UBUGNL1
CSC version: I9300CHLUGOA1
Versión del SW: I9300XXEMG4
IMEI del teléfono: 351869050000150
Phone SN: RV1D35DBFCB
Android version: 4.3 (JSS15J)
Country: Chile
HW platform: exynos4
HW Chip: exynos4412
HW Modem: unknown
Codename: m0ub
Performed by 2.2.5 software version
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM13
Modelo seleccionado: GT-I9300
Modelo del teléfono detectado: GT-I9300
Fecha de creación del firmware: Tue Dec 16 22:27:02 KST 2014
PDA version: I9300UBUGNL1
CSC version: I9300CHLUGOA1
Versión del SW: I9300XXEMG4
IMEI del teléfono: 351869050000150
Phone SN: RV1D35DBFCB
Android version: 4.3 (JSS15J)
Country: Chile
HW platform: exynos4
HW Chip: exynos4412
HW Modem: unknown
Codename: m0ub

ya le pase el parche ariza
moden y kernel modificados y nada sigue en "solo llamadas de emergencia "
necesito una solucion urgente porfavor
desde yamuchas gracias

Mensaje modificado por scorpiogsm el May 29 2016, 03:01 PM

[Anunciante Autorizado]

[gezer047]

no es necesario escribir un certificado, la reparación de imei es muy facil con octopus (Luego de reparar el imei, instala un modem y kernet via recovery para que puedas hacer llamadas o utiliza la opción reparar red)

Necesitas ser root.

CÓDIGO

Platform: Samsung Android
Selected port: COM168
Selected model: GT-I9300
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: GT-I9300
Firmware compiled date: Tue Dec 16 22:27:02 KST 2014
PDA version: I9300UBUGNL1
CSC version: I9300ZTOUGNK2
SW version: unknown
Android version: 4.3 (JSS15J)
Country: Brazil
HW platform: exynos4
HW Chip: exynos4412
HW Modem: unknown
Codename: m0ub
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Cheking security type...
Old security type is detected
Old IMEI: Unknown
New IMEI: 354245-05-XXX326-X
Repairing IMEI ...
Executing exploit...
Exploit has been executed successfully
Repairing network. Please wait, this can take some time...
Network is successfully repaired
Phone will restart now. Please don't disconnect cable!
IMEI successfully repaired.
To finish the operation, please restart the phone via phone's menu.
Performed by 2.2.6 software version