Root I997 De At&t 2.3.6 Opciones

[skycell]

1.) Download Odin 1.7 and extract the program from the .zip file.

2.) Download the version you want. Use a program like 7zip to extract the Odin flashable tar.md5 from the .rar file.:

**** OPTION A ****
I997UCLB3-root.rar


Want to try some different kernels, like Zen Arcade's Infusion-Z? Odin kernel packages are HERE.

3.) Install Samsung Kies to install the latest Samsung USB drivers. This can be found HERE.

Reboot PC. Then, attach phone via USB, and allow drivers to install.

4.) In recovery, wipe all user data and wipe all cache data, BEFORE flashing. If you don't do this, I can't guarantee that your phone won't loop at the AT&T boot animation, or that you won't have other issues.

Put phone in Recovery Mode (Turn phone off, disconnect USB cable, hold power button and both volume buttons, release power button when Samsung logo appears, continue to hold volume buttons until recovery screen appears.). In recovery, choose and follow prompts for options to wipe user data and to wipe cache data.

5.) Place phone in Download Mode (Remove battery, hold down both volume buttons, replace battery, attach USB cable, and then continue to hold volume buttons until the phone enters Download Mode.).

6.) With phone in Download Mode, open the Odin exe. In Odin, if the phone is recognized, the window under ID:COM will turn yellow.

7.) In Odin, click on "PDA" and browse to the tar.md5.

8.) Select the tar.md5. Make sure it shows up in the PDA window, and then click on Start. Do not power off or disconnect the phone while Odin flashes the package and reboots the phone.

9.) You're finished. You now have stock AT&T 2.3.6 Gingerbread (UCLB3) with root.

NOTES
----------------

a.) If you skipped step 4.) and your phone boot loops at the AT&T boot animation, hold down the power button and both volume buttons until you enter recovery. In recovery, wipe all user data and wipe all cache data. Reboot and the phone will boot into rooted 2.3.6 Gingerbread.

b.) If everything has been done correctly, the Setup Wizard will appear when you first boot Gingerbread. If the phone first boots into Gingerbread, and you don't get the Setup Wizard, go to Settings / Privacy / Factory data reset and choose "Reset Phone".


Despues de esto podemos liberra con Z3x

[Anunciante Autorizado]

[katta]

Esto es un copy and paste deberias de tomarte un poquito mas de tiempo en copiar un tema y tambien de poder de subir los archivos necesarios, ademas aqui hablamos español y esta en ingles..

Por eso digo es copy and paste.

Saludos.