Desbloqueo De Huawei T128 Con Infinity, Emulando Cable Con Volcano Box. Opciones

[loboloko69]

Desbloqueo de Huawei T128 con Infinity, emulando cable con Volcano box.


Conectar Volcano, ir a la pestana detect, conectar los voltajes y la punta P-05A, escoger manualmente el siguiente Pinout.

2: Phone Tx
3: Phone Rx
5: GND

le damos a set pinout y lo dejamos ahi.
aqui el log de volcano.

Setting pinouts...
>>Pinout setting complete.


Ábrimos el shell de la Infinity,escogemos el modelo Huawei T128 y eso nos abre el modulo Pana01 V1.78.
Ponemos el puerto donde esta situada la volcano box, escogemos el modelo Huawei T128-HW-A, este fue el que use en este caso.
Hacemos backup de eeprom y de fullflash por si ocurre algun accidente.
Le damos a SP-unlock con direct unlock seleccionado y listo, telefono desbloqueado.

si nos fijamos, veremos que se cambio el imei, ahora tiene uno que empieza por 00XXXXXXXXXX

Copiamos el de la etiqueta y procedemos a repararlo, lo copiamos en la pestana designada y le damos Write.

aqui el log del unlock


==== [05/28/2013 9:50:44] ====
COM228 [ProlificSerial2] selected
module v1.78
Device: Huawei-T128-HW-A
Checking data, wait...
Action: "sp-unlock"
1. Make "read flash" operation
2. Make "read eeprom" operation, so you will have backup for emergency case
ATTENTION: save this backup file in safe place and note IMEI for each eeprom backup file !
3. Make "unlock" operation
4. Phone should be unlocked, but imei will be changed
5. Before unlock check that you have an ability to repair imei

Test phone with new imei, is it will be valid for all your networks.

In case of any problems you can write back eeprom backup and original imei will be back.

Do you want to continue ?
direct unlock
Boot ...
Press and HOLD Power button now !
e-gold: A0
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 0001:22C4
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: c:\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-static_20130528-095104.B1E.bin
loading data...
wrong database file: c:\InfinityBox\Pana01\T128_eep65535.cfg
error: can't load database v.1106
reading eeprom-security...
file saved: c:\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-security_20130528-095105.B1E.bin
reading eeprom-complete...
file saved: c:\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-complete_20130528-095106.B1E.bin
backup critical area Done
Check memory ...
Check memory Done
Write ...
Erasing: eeprom-complete
Writing: eeprom-complete
Write Done
Finished, time used: 18 sec
Remove/Install battery now !


Aqui pongo el de la reparacion de imei.

COM228 [ProlificSerial2] selected
module v1.78

Device: Huawei-T128-HW-A
Checking data, wait...
Action: "repair imei"
new imei: 357563012XXXXXX
Boot ...
Press and HOLD Power button now !
e-gold: A0
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 0001:22C4
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: c:\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-static_20130528-095906.B1E.bin
loading data...
wrong database file: c:\InfinityBox\Pana01\T128_eep65535.cfg
error: can't load database v.1106
reading eeprom-security...
file saved: c:\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-security_20130528-095907.B1E.bin
reading eeprom-complete...
file saved: c:\InfinityBox\Pana01\Huawei-T128-HW-A_eeprom-complete_20130528-095908.B1E.bin
reading additional data...
file saved: c:\InfinityBox\Pana01\Huawei-T128-HW-A_imei-area_20130528-095911.B1E.bin
warning: can't read lock-area
backup critical area Done
Check memory ...
imei found #3
Check memory Done
Write ...
Erasing: imei-area
Writing: imei-area
Erasing: eeprom-security
Writing: eeprom-security
Write Done
Finished, time used: 28 sec
Remove/Install battery now !
Finished


Este telefono era de la compania Unitel, banda 900Mhz.