Alguien Sabe Como Quitar Cwm Recovery, en lg vs910 Opciones

[josednuevo]

algien sabe como quitar cmw recovery en lg vs910 ?

[Anunciante Autorizado]

[vostro]

Bueno he quitado el cmw Recovery. ( Custom Recovery) flasheandole una rom original al telefono y regresa al Recovery normal.

[josednuevo]

si es cierto tu afirmacion, puedes describir si lo hiciste desde scard o desde software por pc y como?


intente este metodo pero no me detecta el telefono en modo com puesto que entra siempre a cwm


Instructions:
0. Install the software that pops up when you plug in your phone.

1. Get the LGNPST Package with the GenericModels and Components Plug-In.
http://www.mediafire.com/download.php?cghufvvn43m7bam

2. Get the driver for the phone and install it
http://www.lg.com/us/support/mc-supp...er_1.0_All.exe

3. Get the Stock Rom TOT file and extract it.
POSTED ABOVE

4. Get the DLL file specifically for the Revolution
http://www.mediafire.com/?4gdq6dsm643v9ur

5. Extract the "LGNPST Store & Lab"

6. Install the following order:
a. LGNPSTv1.2_Store_Version.msi
b. LGNPST_v1.2_Lab_Version.msi
c. Components >> LGNPST_Components_Ver_5_0_12_0.msi
d. GenericModels >> LGNPST_GenericModels_Ver_5_0_10_0.msi

7. Run "Right_Click_Register_DLL.reg"

8. Make a new folder called "Models" in the program's directory
Default: "C:\LG Electronics\LGNPST\"

9. Grab the "VS910.dll" and put it in the "Models" folder.

10. Right Click "VS910.dll" and click on Install/Register.
Note: DLL WILL NOT INSTALL UNLESS COMPONENTS AND GENERICMODELS PLUG-INS ARE INSTALLED!!!

IF YOU CANNOT INSTALL IT ON A RIGHT CLICK GO TO "C:\Windows\System32" and drag the VS910.dll on "regsvr32" and it should install.

a. Make sure you install it properly
b. REBOOT!!

11. Run "LGNPST"

12. Plug in your phone, use Internet Connection Mode,and enable USB Debugging.

13. Phone should pop up in the list

14. Select the phone and click on the Open folder button inside the .BIN query underneath the COM## details.

15. Since it wants a .bin file, you can open the .TOT file by typing "*.*" inside the File Name query and hitting Enter

16. Select "VS910ZV4_04.S4_04.P58008.R5.user.tot" and Click OK

17. Then click on Upgrade

18. Wait a few minutes