Como Leer El Has Del Nokia C2-01, Tube problemas y haciendo pruebas encontre la solucion Opciones

[vitadiaz]

Inicialmente conectamos via USB ROM
Iniciamos Nokia Service Tool
y le damos a BUS Check
nos entrega esto

1)
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C08110B3
Using device: USB ROM and HTI, FW ver: 00.50, SN: 00007180
Connection status: UHCI:HUB::USB 2.00 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21064(15-06-2012), Library ver: 1.0.0.14102(15-06-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000010000022600000001020C192102044100 [RAPS2 ver: PA 4.x]
CMT EM0 ID: 00001051
CMT EM1 ID: 00001060
CMT PUBLIC ID: 22900111016D114965018D8747CFEF5563354839
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
CMT ROM ID: 67E82268F29CEA60
Loading CMT secondary boot code
SecondaryBoot: RAP3Gv40_2nd.fg [BB5] version: 11.14.0 revision: 3.0 size: 0x3AC0
Supported Ids: 0203192102004000, 020C192102004000, 0203192102024000, 020C192102024000, 020C192102004100, 0203192102004100, 020C192102014100, 0203192102014100, 020C192102014000, 0203192102014000, 020C192102034000, 0203192102034000, 0203192102024100, 020C192102024100, 0203192102034100, 020C192102034100, 0203192102054100, 020C192102054100, 0203192102044100, 020C192102044100
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0030 - 0000 0431 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: RAP3Gv40_XSR17_alg.fg [XSR 1.6] version: 11.14.0 revision: 3.0 size: 0x91BD2
Supported Ids: 0203192102004000, 020C192102004000, 0203192102024000, 020C192102024000, 020C192102004100, 0203192102004100, 020C192102014100, 0203192102014100, 020C192102014000, 0203192102014000, 020C192102034000, 0203192102034000, 0203192102024100, 020C192102024100, 0203192102034100, 020C192102034100, 0203192102054100, 020C192102054100, 0203192102044100, 020C192102044100
Update server code loaded.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 1905FDEC
FUR: Adding Asic CMT as client OK.
CMT PAPUBKEYS HASH: 8443ECD57D2EDADDAADBAD248F1B3B559E14D184
Original Imei: 359772xxxxxxxx
Original Product code: 059J112
Bluetooth ID: 502D1DD0BD61
SIMLOCK PA identifier:
[0] PA_SIMLOC30

Reading CMT NPC (0x168 bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0x160 bytes).
Reading CMT HWC (0xD4 bytes).
Reading CMT R&D (0x0 bytes).
Reading CMT MDM_KEYS (0x0 bytes).
Reading CMT PARTNERC (0x0 bytes).

Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 1905FDEC
Waiting for USB device removal ...
Warning: Phone did not reboot to normal mode.

2)
Se me keda ahi
entonces me voy hasta Service
Imey & Security
y Le doy a
SL3 logger
paso a
Read Phone ID


Despues aparecera

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: C08110B3
Using device: USB Phonet and HTI, FW ver: 00.50, SN: 00007180
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: nmwcdc, ver: 7.1.32.75
Module ver: 1.0.0.21064(15-06-2012), Library ver: 1.0.0.14102(15-06-2012)

Phone type: RM-722 (Nokia C2-01.5)
SW version: V 11.00 17-03-11 RM-722 © Nokia

Phone type: RM-722 (Nokia C2-01.5)
Product code: 059J112
SW version: V 11.00 - 17-03-11 - RM-722 - © Nokia
LanguagePkg version: 0 - 17-03-11 - RM-721 - © Nokia - L
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 1905FDEC
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000010000022600000001020C192102044100 [RAPS2 ver: PA 4.x]
CMT EM0 ID: 00001051
CMT EM1 ID: 00001060
CMT PUBLIC ID: 22900111016D114965018D8747CFEF5563354839
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
CMT ROM ID: 67E82268F29CEA60
Loading CMT secondary boot code
SecondaryBoot: RAP3Gv40_2nd.fg [BB5] version: 11.34.0 revision: 3.0 size: 0x3AC0
Supported Ids: 0203192102004000, 020C192102004000, 0203192102024000, 020C192102024000, 020C192102004100, 0203192102004100, 020C192102014100, 0203192102014100, 020C192102014000, 0203192102014000, 020C192102034000, 0203192102034000, 0203192102024100, 020C192102024100, 0203192102034100, 020C192102034100, 0203192102054100, 020C192102054100, 0203192102044100, 020C192102044100
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0000 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0030 - 0000 0431 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: RAP3Gv40_XSR17_alg.fg [XSR 1.6] version: 11.34.0 revision: 3.0 size: 0x9AE1A
Supported Ids: 0203192102004000, 020C192102004000, 0203192102024000, 020C192102024000, 020C192102004100, 0203192102004100, 020C192102014100, 0203192102014100, 020C192102014000, 0203192102014000, 020C192102034000, 0203192102034000, 0203192102024100, 020C192102024100, 0203192102034100, 020C192102034100, 0203192102054100, 020C192102054100, 0203192102044100, 020C192102044100
Update server code loaded.
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 1905FDEC
FUR: Adding Asic CMT as client OK.
PUBLIC ID: 22900111016D114965018D8747CFEF5563354839
PRIVATE ID: 465558B5B34F88FDB5D4A748D0079167802388AB
E-FUSE: D5C0CADB
SEC ROM CRC: F29CEA60

Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 1905FDEC
Waiting for USB device removal ...

Aca es donde se queda esperando que el celu se comunique nuevamente con el pc
Verifico que el cel este apagado pulsando una tecla y
ahi lo desconecto y conecto nuevamente sin sacar la bateria (yo hago la desconeccion en 10 segundos despues que me indica que esta esperando la comunicacion con el device, pero puede que varie segun cada caso, prueben)
ahora me termina de leer el has del celu que es el objetivo de este post

3)
Ahora termina de leer y grabar el has
Me imagino que es una omision del fabricante de soft porque el dato esta ya listo pero falta la parte de que automaticamente se conecte de nuevo el cel para poder verificar la coneccion


Device connected: nmwcdc\Nokia USB Phonet, PORT_ID: 1B093B6
Verifying communication to device OK.
Verifying secure data ...OK
HASH: 856DC6650F57BD3A13264F2458B2CD34F9DE63D8
Verifying RSA signature ...OK, RSA verify passed
Hash file saved to "C:\mobileEx\3.5\data\SL3\RM-722_359772xxxxxxxx_copia.sha"


Salu2 y que les de veneficios a lo mejor con otros modelos tiene el mismo problema yo todabia no lo probe pero lo voy a probar y les avisare si es que salen otros modelos.

[Anunciante Autorizado]

[ezequielvar]

basta solo con darle read Phone Id y ya hace todo el proceso de lectura sin problemas

[eduardocelis]

basta solo con darle read Phone Id y ya hace todo el proceso de lectura sin problemas

no inventes cosas amigo... cuesta un xxxx leerle el hash a ese telefono... yo tube que conseguir el cable mochilla

Mensaje modificado por romanalexander el Mar 9 2013, 09:12 PM

Motivo de edición: Cuide sus palabras caballero...

[alexander21]

no inventes cosas amigo... cuesta un webo leerle el hash a ese fono... yo tuve q conseguir el cable mochilla

amigo en este foro no se puede responder con groserias te van expulsar, ademas este equipo si se puede leer sin problemas via usb yo en lo personal los leo con BEST por que se me hace mejor y salen de una de las 2 maneras via usb y fbus