Ayuda Con N7000, Riff Da Error.. |
 |
|
Bienvenido, invitado ( Identificarse | Registrarse )
  |
Ayuda Con N7000, Riff Da Error.. |
  Dec 12 2012, 10:07 AM
Publicado:
#1
|
|
|
Miembro del Clan  Grupo: Miembros Mensajes: 47 Agradecimientos: 16 Registrado: 11-December 12 Miembro No.: 413,456  |
Buenas, estoy tratando de reparar boot a un N7000 y me sale error:
Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14,68GB ERROR: Selected FLASH Chip was not initialized by the DCC Loader. Soy nuevo con esta herramienta.. Saludos a Todos |
 |
 
|
| Anunciante Autorizado |
Dec 12 2012, 10:07 AM
Publicado:
#
|
 Estas ofertas pudieran interesarte. |
|
|
|
|
|
Jan 14 2013, 12:34 AM
Publicado:
#2
|
|
|
Miembro del Clan Grupo: Miembros Mensajes: 19 Agradecimientos: 26 Registrado: 15-November 09 Desde: Valencia, Venezuela Miembro No.: 69,569 Pais: 
|
CITA(mchacon27 @ Dec 12 2012, 11:07 AM)  Buenas, estoy tratando de reparar boot a un N7000 y me sale error: Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14,68GB ERROR: Selected FLASH Chip was not initialized by the DCC Loader. Soy nuevo con esta herramienta.. Saludos a Todos Eso significa que el emmc esta dañado. No hay forma de repararlo vía software, debe ser reemplazado, nada fácil. |
|
|
|
|
|
|
Fecha y Hora actual: 22nd April 2026 - 12:41 AM |
