Nokia N8 Phone Start-up Failed Contact The Retailer Opciones

[GuilleC]

Necesito ayuda con ese telefono lo flashee luego se murio le hice un erase y quedo asi este el log:

Phone type: RM-596 (Nokia N8-00)
SW version: V 92_11w37.1 21-11-11 RM-596 © Nokia
Imei plain: 35698804xxxxxx-9
Product code: 059C8T6
Battery voltage: 4655 mV, current: 0 mA
ApeCoreSw: 025.008
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!


Imei net: 35698804xxxxxx9
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

[Anunciante Autorizado]

[christiam]

Necesito ayuda con ese telefono lo flashee luego se murio le hice un erase y quedo asi este el log:

Phone type: RM-596 (Nokia N8-00)
SW version: V 92_11w37.1 21-11-11 RM-596 © Nokia
Imei plain: 35698804xxxxxx-9
Product code: 059C8T6
Battery voltage: 4655 mV, current: 0 mA
ApeCoreSw: 025.008
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY[MX] seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
Imei net: 35698804xxxxxx9
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

amigo solo necesitas reparar en el modulo de mxkey te vas a pm y cargas de otro n8 el pm pero solo el sector 1 y el 309 deja vr si de casualidad hice respaldo de uno que tenia hace dias si no a buscar en google , que de echo sin o miento no hay servicio sx4 ahorita en mx pero asi se repara

[rick19]

ya hay solucion para eso tambien en cyclone aqui hay un tuto en el clan no te desesperes hermano ya he sacado varios asi con cyclone.
.

[GuilleC]

amigo solo necesitas reparar en el modulo de mxkey te vas a pm y cargas de otro n8 el pm pero solo el sector 1 y el 309 deja vr si de casualidad hice respaldo de uno que tenia hace dias si no a buscar en google , que de echo sin o miento no hay servicio sx4 ahorita en mx pero asi se repara

Con MxBox me da error


K module version: 1.25
NK applet version: 00.20
NK module ready.

HTI connected as additional security service.
STANDALONE MODE enabled.
Please "Scan" or "BUS check" before any operation ...
Writing PM from Node ...
Section: 1
Warning: failed to write 1 - 0 (10 bytes)
Warning: failed to write 1 - 1 (94 bytes)
Warning: failed to write 1 - 2 (110 bytes)
Warning: failed to write 1 - 4 (10 bytes)
Warning: failed to write 1 - 6 (110 bytes)
Warning: failed to write 1 - 7 (450 bytes)
Warning: failed to write 1 - 8 (10 bytes)
Warning: failed to write 1 - 13 (110 bytes)
Warning: failed to write 1 - 15 (30 bytes)
Warning: failed to write 1 - 16 (30 bytes)
Warning: failed to write 1 - 17 (30 bytes)
Warning: failed to write 1 - 18 (30 bytes)
Warning: failed to write 1 - 19 (30 bytes)
Warning: failed to write 1 - 22 (24 bytes)
Warning: failed to write 1 - 26 (10 bytes)
Warning: failed to write 1 - 27 (36 bytes)
Warning: failed to write 1 - 28 (110 bytes)
Warning: failed to write 1 - 29 (10 bytes)
Warning: failed to write 1 - 30 (36 bytes)
Warning: failed to write 1 - 31 (24 bytes)
Warning: failed to write 1 - 32 (216 bytes)
Warning: failed to write 1 - 33 (36 bytes)
Warning: failed to write 1 - 35 (24 bytes)
Warning: failed to write 1 - 36 (24 bytes)
Warning: failed to write 1 - 38 (216 bytes)
Warning: failed to write 1 - 39 (36 bytes)
Warning: failed to write 1 - 40 (24 bytes)
Warning: failed to write 1 - 41 (216 bytes)
Warning: failed to write 1 - 43 (36 bytes)
Warning: failed to write 1 - 44 (216 bytes)
Warning: failed to write 1 - 45 (216 bytes)
- 239 skipped
Section: 309
Warning: failed to write 309 - 0 (4 bytes)
Warning: failed to write 309 - 1 (2 bytes)
Warning: failed to write 309 - 2 (12 bytes)
Warning: failed to write 309 - 3 (36 bytes)
Warning: failed to write 309 - 4 (12 bytes)
Warning: failed to write 309 - 7 (12 bytes)
Warning: failed to write 309 - 17 (12 bytes)
Completed in 7.125 s

[3zr3vnoc]

amigos como escribo el PM con el 1 y el 309, tengo el pm del mismo telefono pero no tiene el 309 solo (308) y no se porque el pm de respaldo que hizo la cyclone no funciona..

saludos

http://www.clangsm.com/forum/index.php?sho...=206560&hl=
http://www.clangsm.com/forum/index.php?sho...05999&st=20
http://www.clangsm.com/forum/index.php?sho...=101188&hl=
http://www.clangsm.com/forum/index.php?sho...=141866&hl=
http://www.clangsm.com/forum/index.php?sho...=220406&hl=

[nokiadocs]

Aqui tienes un full PM, leido por mi con MX-BOX

Fichero(s) Adjunto(s)

 RM_596_f... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 14.77k ) Número de descargas: 17