N9 Telcel Error Al Flasher De Todas Formas Urgente Gracias., ya prove de tres formas distintas Opciones

[carloslan]

MXKEY [FT SCR2000 0], SN: C083AAB5
Using device: USB ROM
Connection status: No device connected
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
Waiting for USB interface ...
Found device RM-696, hardware revision 1603
NOLO version 2.1.5
Version of 'sw-release': DFL61_HARMATTAN_10.2011.34-1.265.5_PR_265
Sending ape-algo image (7039 kB)...
Waiting for USB phonet ...
Verifying communication to device ...
Server application: 1.6.3
Found product: RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_20.2011.40-4.420.3_PR_420
Image moslo not present
Image tar skipped
Image config skipped
Battery level 43 %, continuing.
cert-sw ( 1 kB) written.
xloader (23 kB) written.
secondary (93 kB) written.
cmt-2nd (95 kB) written.
cmt-algo ( 789 kB) written.
kernel (2712 kB) written.
cmt-mcusw (6050 kB) written.
rootfs ( 1076013 kB) written.
[f] rootfs [finishing 0 % 19456 / 1076013 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
[f] rootfs [finishing 0 % 19456 / 1076013 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
[f] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3511 kB/s]
[f] rootfs [finishing 0 % 19456 / 1076013 kB NA ]
[-] mmc [pending 0 % 0 / 0 kB NA ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcpAsZAQ/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmcpAsZAQ/mnt: No such file or directory
[Pipe 5] Finishing in error state with status 1
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe 7] Finishing in error state with status 1
========================================
Sleeping for 15 seconds while device boot up ...




con WinFlasher_3.12.1.exe, phoenix 2012, mxkey 3.5 2.3.

Posibles soluciones
1.- en un pos dice que bajara la iso una vez mas que estaba mal probablemente.
2.- sacar la pila a 90% minimo, cuando el software solo requiere una carga minima de 11% ayuda.

Mensaje modificado por carloslan el Aug 9 2012, 06:39 PM

[Anunciante Autorizado]

[carloslan]

quien ya lo ha flasheado compañeros

bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
mmc: sfdisk returned status 1
mmc: Could not exec 'tune2fs -L rootfs /tmp/sudmmcpAsZAQ/internal0p2'
mmc: Could not remove mount directory /tmp/sudmmcpAsZAQ/mnt: No such file or directory
[Pipe 5] Finishing in error state with status 1
MTC_NOS_READY not received
MTC_NOS_READY not received
MTC_NOS_READY not received
CMT RFS failed
[Pipe 7] Finishing in error state with status 1
========================================
Sleeping for 15 seconds while device boot up ...

[pablo76]

hola, no se que opcion usaste primero, pero la recomendada por maemo y que yo he probado es winflasher, si la pc te lo reconoce al conectarlo, deberias de probar nuevamente winflasher y reveer el metodo que estas usando para el flash. Saludos!

[carloslan]

hola, no se que opcion usaste primero, pero la recomendada por maemo y que yo he probado es winflasher, si la pc te lo reconoce al conectarlo, deberias de probar nuevamente winflasher y reveer el metodo que estas usando para el flash. Saludos!

por estos tres metodos lo he probado y me sale igual con WinFlasher_3.12.1.exe, phoenix 2012, mxkey 3.5 2.3.

compañero gracias otra opcion?