Actualizaciones De Mtbox Nokia, Lugar Exclusivo Opciones

[Eliminado_menero_*]

Update season has been started!

What's new in MTB NK v2.36:

• Read Ask DCT4 and auto send to server for computation
• RSA Forgery when SimLock damaged (fffff)
• USB Flash E71 and the likes
• Dynamic camera config after flash (option in Automatic actions when flashing)
• Broadcomm USB flashing (tested on x2)
• Certificate backup when possible through USB ( X2)
• N73 FBUS flashing ( blank display after flash)
• USB flashing of 5130 ( phones are too slow in erase and had to increase timeout for erase)
• New flash loaders
• Added new MT Box update tool v3.19
• Added support for MT Box with serial number 4xxxxxxxxx (Error: "Unable to locate the MT-box interface")

[Anunciante Autorizado]

[Pulian]

LINKS DESCARGA

LINK DIRECTO - MT 2.36 y MTOOL 3.19

LINK RAPIDSHARE - MT 2.36

MTTOOL 3.19

Notas:

1. Para usar la nueva version, luego de instalarla debes usar el mttool 3.19 para actualizar los ini de la aplicaion, luego si puede ser utilizada.

2. Hoy se ha detectado un bug en el desbloqueo de algunos nokia bb5 por lo que se sugiere usar la version 2.35_13 para desbloquear los telefonos mientras se corrige en la proxima actualizacion.
este es el error que genera cuando desbloqueas:

Log:
XXX: XXXX - Nokia Flash/Repair v2.36
Box: CR V 1.002 256
Code: NK V 2.001 1054
SN: 0071CCCC2E
Nokia Unlimited: 435 times started
SonyEricsson Trial: 0 left, each max 15min
V 04.13/16-05-06/RM-70 © Nokia.
IMEI: XXXX
Operator: 8000000000000000
Profile bits: 2600200000000000
Closed on Mcc Mnc: 26002F
3518820xxxxxxxxxx
Searching loader
rap3gv3_2nd.fg
RAP3 Phone, Requesting...
Found BB5SL20 Pin. Proceeding in StandAlone mode
RAP3 Failed at stage1
14141414141414143266F
SL20 RPL Procedure Finished

[Eliminado_menero_*]

Dear customers,

There is explanation how to use SL3 Local Brute Force for MT Box.
To use this service you can use also old software versions MTB NK 2.35.3 SL3 and MT Box update tool v3.18
To able calculate unlock data for your phone you need to download "ighashgpu" software from Ivan Golubev web page.
Before you use "ighashgpu" software please read and accept License Agreement which is included in software package

How to use SL3 Local Brute Force:

1. Upload phone to SL3 server using "Read" button in BF tab
2. Cancel phone from calculation queue, double click on phone imei in BF tab
3. Start MT tool v3.18 or v3.19
4. Press "Download Zone" button, we recommend to use Mozilla Firefox as your default browser
5. In "SL3 Service" tab click on "Get BF data" and enter imei from canceled phone the press "Get Data" button. You will get command line for ighashgpu software (Brute Force software by Ivan Golubev)
6. Start ighashgpu software and wait to finish (Calculation time depend from your PC hardware power)
7. When software finish login again via MT tool by pressing "Download Zone" button
8. Go to SL3 service than click "Get Code"
9. Enter phone imei and calculated data (result from ighashgpu software) 15 bytes.
10. If all is ok you will get unlock code for this IMEI


All support questions regarding SL3 Local Brute Force (hardware requirements etc….) need to be posted in dedicated forum section SL3 Local Brute Force - LBF

Please note:
To able use SL3 Local Brute Force service you need to have minimum 50 credits on your MT Box account (these credits will be deducted when upload phone (step1) and back to your account when you cancel phone from queue (step2.))

- To use SL3 Local Brute Force i hope all you know which hardware requirements need.
- All who does not want to waste time and money with buying expensive PC's Griffin Team SL3 server is ready.

Griffin Team wish you Happy New Year and low electric power bill !

Related links:

All MT Box MT NK updates
Unlock Nokia SL3 supported models
Order MT Box credits and MT Box admin panel instantly over Moneybookers
MT Box credits resellers
MT Box credits generator - Instant credits delivery - Pay Pal accepted
MT Box FAQ section
SL3 successfully unlocked phones
Successfully flashed Nokia with new loaders
Want to be Griffin Team reseller?


en español


Estimados clientes,

No hay explicación de cómo utilizar la fuerza bruta SL3 Local para Caja MT.
Para utilizar este servicio se puede utilizar también las viejas versiones de software de MTB NK 2.35.3 SL3 y MT herramienta de actualización de Caja v3.18
Para poder calcular los datos para desbloquear el teléfono, deberá descargar "ighashgpu" El software de la página web de Ivan Golubev.
Antes de utilizar "ighashgpu" software, por favor leer y aceptar la licencia que se incluye en el paquete de software

Cómo utilizar la fuerza bruta SL3 local:

1. teléfono Subir al servidor utilizando SL3 botón "Leer" en BF ficha
2. Anular el teléfono de la cola de cálculo, haga doble clic en el imei del teléfono en BF ficha
3. Inicio herramienta v3.18 o v3.19 MT
4. Pulse el botón "Descargar Zone" botón, nosotros recomendamos el uso de Mozilla Firefox como navegador predeterminado
5. En "SL3 servicio", haga clic en la pestaña "Obtener datos BF" y entrar en IMEI del teléfono canceló el botón "Obtener datos" botón. Usted recibirá la línea de comandos para el software ighashgpu (Fuerza Bruta de software por Ivan Golubev)
6. Inicio de software ighashgpu y esperar a que termine (el tiempo de cálculo depende de su potencia de hardware para PC)
7. Cuando el software termine de nuevo ingreso a través de herramienta de MT con el botón "Descargar Zone" botón
8. Ir al servicio SL3 que haga clic en "Obtener código"
9. Introduzca IMEI del teléfono y los datos calculados (resultado del software ighashgpu) 15 bytes.
10. Si todo está bien, usted recibirá el código de desbloqueo para este IMEI


Todas las preguntas de soporte técnico en relación SL3 local de Fuerza Bruta (. Requisitos de hardware, etc ...) deben ser publicados en la sección dedicada foro SL3 Fuerza bruta Local - LBF

Tenga en cuenta:
Para poder SL3 uso de servicios locales de fuerza bruta es necesario tener un mínimo de 50 créditos en su cuenta de Caja MT (estos créditos serán descontados cuando se carga teléfono (paso 1) y de nuevo a su cuenta a la hora de cancelar teléfono de la cola (step2.))

- Para utilizar la fuerza bruta SL3 local espero que todos ustedes saben que los requisitos de hardware necesario.
- Todos los que no quieren perder tiempo y dinero con la compra de equipo costoso de Griffin servidor de Team SL3 está listo.

Griffin Team deseamos Feliz Año Nuevo proyecto de ley y bajo consumo de energía eléctrica!

Mensaje modificado por menero el Dec 30 2010, 02:50 PM

[Eliminado_CONEXIONDIRECTA_*]

Unlock SL1, SL2, SL3, DCT4/+, Free for All MTBOX USers !!!

--------------------------------------------------------------------------------

Hello !

Unlock SL1, SL2, SL3, DCT4/+ Free for All MTBOX Users !!!


Make box update by upd tool 3.18/19 (SL20 activation free for all now)
Enter to MTB NK exe user name and password = boxlogin
SL1/2 make unlock by "SL20RPL" button
SL3 make unlock by "LBF" solution
DCT4/+ make unlock by "Unlock" button

Simple and very easy ! Make free unlock / take money

Enjoy Your MTBOX !

Best Regards GSMinfo.pl

[Eliminado_menero_*]

MTB NK v2.36.1 discussion thread.
Please post here all bugs and update recommendations.

What's new in MTB NK v2.36.1:

• SL20 RPL procedure fixed
• RAP3 SL3 read fixed
• Added detect whether TX2 line was connected when rebuilding Certificates ( RPL write)
• Increased Erase timeout, hoping to solve problems with 6303ci flash over USB

Download:

MTB NK 2.36.1 setup - Rapid Share link
MTB NK 2.36.1 exe only - For these who have 2.36 installed already - Rapid Share link
MTB NK 2.36.1 exe only For these who have 2.36 installed already - direct URL

Related links:

All MT Box MT NK updates
Unlock Nokia SL3 supported models
Order MT Box credits and MT Box admin panel instantly over Moneybookers
MT Box credits resellers
MT Box credits generator - Instant credits delivery - Pay Pal accepted
MT Box FAQ section
SL3 successfully unlocked phones
Successfully flashed Nokia with new loaders
Want to be Griffin Team reseller?

[Eliminado_CONEXIONDIRECTA_*]

MT-Box NSM v2.230 ready! Free SL3 USB Reader

--------------------------------------------------------------------------------

MT-Box NSM SL3 USB Reader

This is an application for information purposes and checking by one mouse click thought USB interface/ No need NSM Account, no need NSM credits:

Read more about new update here

BR, NSM GriffinTeam Support

booommmm!!!!

Mensaje modificado por CONEXIONDIRECTA el Jan 13 2011, 10:42 AM

[falladera]

MTB NK 2.36.3 discussion thread.
Please post here all bugs and recommendations.

What's new in MTB NK v2.36.3 setup:

• SL3 RPL service started. Repair bad imei 123456789xxxxxxxx on all SL3 phones now is available. The phone will be restored to its factory state.
• Automatically add installed data packages to models list, even if not existing in phoenix.ini ( will not show phone public name ).
• Refined search for model ( bug when search for RM-5 and it find RM-540 instead ). It still does it wrong if one types 'RM-5' in combo and press 'Enter'. This can't be fixed as it is automatically done by Windows. But if after typing 'RM-5' one presses 'Down arrow' MT will use different search algorithm and correctly find 2300.
• Added support for Life Timer reset on new models (x2, x3-02...)
Note: in order for the changes to take effect, phone needs to be restarted after operation, of factory default settings to be executed.
• Improved 'Update' button in SL3 BForce compute. Now will show already computed codes (unlocked).
• Added common folder for Dynamic Camera config. Some users don't install full versions of flash, so they can't configure the camera after flash. To solve this, MT will look for support files in product folder, if it doesn't find, it will also look in 'camconfig' folder, where a collection of camera configuration files is stored.
• MT tool v3.20

Using SL3 RPL service you can:

• Repair imei 123456654321?
• Repair SimLock data Failed Read...(Contact Service)
• Repair Superdongle Key - phone turn off in 3-10 minutes,
• Repair APE data on smartphones - Nokia logo long time







How to use SL3 ASK to RPL service:

- Download and install MTB NK 2.36.3 exe
- Start MTB NK 2.36.3
- Go to server tab and click on Delete button
- Click on Save button and enter login details: user name - boxlogin, password: boxlogin
- Connect phone to FBUS cable
- Go to Extras - Imei / ESN repair
- Press BB5 ASK BB5 button
- Software starts to boot the phone and will ask you:

Would you like to send ASK to server?
Cost is 80 credits!

- If you want to send ASK file to server press Yes button. 80 MT Box credits will be deducted from your MT box account only once per phone imei.
- If you does not want to send ASK file to server press NO.

How to check it is your RPL file ready:

- Start MTB NK 2.36.3
- Connect phone to FBUS cable
- Go to Extras - Imei / ESN repair
- Press BB5 ASK BB5 button
- Software starts to boot the phone and will ask you:

Would you like to send ASK to server.
Cost is 80 credits!

- Press YES button.
- Software will NOT deduct 80 credits from your account.
- Also you can check does your RPL file is ready without any credits on your MT Box account.
- If your RPL file is ready software will download it and write to phone automatically.

Important information about SL3 RPL service:

• SL3 ASK to RPL service cost 80 MT Box credits per phone
• Time for SL3 RPL calculation is up to 72 hours
• Once uploaded ASK file cant be canceled from calculation

Please note:

Posting ASK or RPL files, PHONE IMEI and PUBLIC ID on forums are STRONGLY PROHIBITED.
So please when post about your problem edit last 6 digits from phone imei, delete PUBLIC ID (RAP) from log file before post it.
Breaking this rule will cause your support account closed and MT Box blocked for all services.
RPL files are calculated files and there CANT be any mistake in.
Once again do not upload ASK or RPL file to forum, PHONE IMEI and PUBLIC ID.


What's new in MT tool v3.20 beta:

• Fixed bug " Can't Connect to Server.123 "
• Added new button " Box Stats "

Now you can see:

• Your box update history
• MT box credits information
• Available services for your MT Box
• SL3 service status
• All your unlocked SL3 phones with codes and used credits
• All used services on MT server with prices and time
• Box credits recharge history

First run of "Box Stats" will open your default browser window and ask you to register with your name and email address.
After registration validation link will be sent to email address you enter upon registration process.
Please to all who use Yahoo, Hotmail, Gmail and other free email services check your Spam or Junk folder if no validation link received in 10 minutes.
Recommended browsers all except Internet Explorer (because of their rigid security settings)


Download:

MTB NK 2.36.3 setup - Rapid Share link

http://rapidshare.com/#!download|989l3..._36_3.exe|63767

MTB NK 2.36.3 exe only - For these who have 2.36.1 installed already - Rapid Share link

http://rapidshare.com/#!download|987tl..._2_36_3.ZIP|492

MT Box update tool v3.20 beta

http://www.griffinteam.net/cms/?page_id=397

Mensaje modificado por falladera el Jan 20 2011, 10:25 AM

Fichero(s) Adjunto(s)

 mt_box_s... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 81.7k ) Número de descargas: 0

 

[Eliminado_CONEXIONDIRECTA_*]

MTB NK v2.36.4 Released ! Fixed RPL support for Rapido and Rapu Yama phones

--------------------------------------------------------------------------------

What's new in MTB NK v2.36.4:

• Fixed RPL support for 'New Generation' loaders ( Rapido and Rapu Yama phones)

Please note:
To use MTB NK v2.36.4 you need to have MTB NK 2 36 3 setup installed already.

Using SL3 RPL service you can:

• Repair imei 123456654321?
• Repair SimLock data Failed Read...(Contact Service)
• Repair Superdongle Key - phone turn off in 3-10 minutes,
• Repair APE data on smartphones - Nokia logo long time

How to use SL3 ASK to RPL service:

- Download and install MTB NK 2.36.4 exe
- Start MTB NK 2.36.4
- Go to server tab and click on Delete button
- Click on Save button and enter login details: user name - boxlogin, password: boxlogin
- Connect phone to FBUS cable
- Go to Extras - Imei / ESN repair
- Press BB5 ASK BB5 button
- Software starts to boot the phone and will ask you:

Would you like to send ASK to server?
Cost is 80 credits!

- If you want to send ASK file to server press Yes button. 80 MT Box credits will be deducted from your MT box account only once per phone imei.
- If you does not want to send ASK file to server press NO.

How to check it is your RPL file ready:

- Start MTB NK 2.36.4
- Connect phone to FBUS cable
- Go to Extras - Imei / ESN repair
- Press BB5 ASK BB5 button
- Software starts to boot the phone and will ask you:

Would you like to send ASK to server.
Cost is 80 credits!

- Press YES button.
- Software will NOT deduct 80 credits from your account.
- Also you can check does your RPL file is ready without any credits on your MT Box account.
- If your RPL file is ready software will download it and write to phone automatically.

Important information about SL3 RPL service:

• SL3 ASK to RPL service cost 80 MT Box credits per phone
• Time for SL3 RPL calculation is up to 72 hours
• Once uploaded ASK file cant be canceled from calculation

Please note:

Posting ASK or RPL files, PHONE IMEI and PUBLIC ID on forums are STRONGLY PROHIBITED.

So please when post about your problem edit last 6 digits from phone imei, delete PUBLIC ID (RAP) from log file before post it.
Breaking this rule will cause your support account closed and MT Box blocked for all services.
RPL files are calculated files and there CANT be any mistake in.
Once again do not upload ASK or RPL file to forum, PHONE IMEI and PUBLIC ID.


Setup 2 36 3 http://rapidshare.com/#%21download%7C989l3...6_3.exe%7C63767

MTB NK 2 36 4 http://rapidshare.com/#%21download%7C288tg..._36_4.ZIP%7C490

Best Regards GSMinfo

Mensaje modificado por CONEXIONDIRECTA el Jan 22 2011, 12:58 PM

[TELCEL]

MTBox Credits Generator (MTB CG) Ver 1.4 Released


MTBox Credits Generator (MTB CG) Ver 1.4 Released !

• Nokia NaviFirm (nokia FW downloader) added for free for All MTBox Users

MTB CG Ver 1.4 Download Links http://hotfile.com/dl/99155285/b76f5da/gt_client.rar.html



Best Regards GSMinfo.pl

Mensaje modificado por TELCEL el Jan 24 2011, 09:45 AM

[Eliminado_menero_*]

What's new in MT tool v3.21:

• Fixed bug " Can't Connect to Server.123 "

Download:

MT Box update tool v3.21

Related links:

All MT Box MT NK updates
Camera configuration files collection
Unlock Nokia SL3 supported models
Order MT Box credits and MT Box admin panel instantly over Moneybookers
MT Box credits resellers
MT Box credits generator - Instant credits delivery - Pay Pal accepted
MT Box FAQ section
SL3 successfully unlocked phones
Successfully flashed Nokia with new loaders

Want to be Griffin Team reseller?

[3zr3vnoc]

Download:

MT Box update tool v3.21

[SpLock]

02.02.2011 - MT Box Local Brute Force Shell v0.1
What's new in SL3 LBF Shell v0.1:

• Support for start new LBF job using simple Windows software
• Support for resume LBF job
• Support to stop LBF job

This new software for MT Box allows you to stop and resume LBF (local brute force) job when you need.
This software allows you SL3 Local Brute Force calculation using ATI graphic cards.

How to Start New Job:

1. Download and install SL3 LBF Shell software
2. Start MTB NK 2.36.4 or higher version
3. Go to SL3 BF compute tab
4. Upload phone to SL3 server using "Read" button in SL3 BF compute tab
5. Cancel phone from calculation queue, double click on phone imei in SL3 BF tab
6. Start MT Tool v3.21 or higher version
7. Press "Download Zone" button New browser window appears.
We recommend to use Mozilla Firefox as your default browser.
8. In "SL3 Service" tab click on "Get BF data" and enter imei from canceled phone the press
"Get Data" button. You will get necessary data for SL3 LBF Shell software.
9. Copy BF data for example:
ighashgpu -t:sha1 -salt:003542250374556200 -h:F8B4D8D05E7C71A7EAB8B12B6FF0B8EBB2B19DDD
-uh:00010203040506070809 -min:15 -max:15

10. Start SL3 LBF Shell v0.1 software and paste in first software line (command line)
11. Press Start New Job button
12. Software start to work
13. You can see remaining average time to get code. Calculation time depend from ATI cards you use
14. Please wait to software finish
15. When software finish copy all digits after word Found:
16. Login again via MT Tool by pressing "Download Zone" button
17. Go to SL3 service than click "Get Code"
18. Enter calculated data (result from SL3 LBF Shell software) 15 bytes and imei.
19. If all is ok you will get unlock code for this IMEI

How to Stop Job:

1. If you click on Stop Job please wait to software finish already started part of calculation and write results in log file (*bf_job file). All files are saved to SL3 LBF Shell software folder in format "your_phone_imei.bf_job".

How to Resume Job:

1. Start SL3 LBF software then click on Resume Job button
2. Software will ask you for bf_job file
3. Select desired job file and wait to software continue job


Please note:

• SL3 LBF software and ighashgpu.exe must be in same folder. Ighashgpu software is included in this installation.
Please read and accept ighashgpu license.txt included in installer.
• To able use SL3 Local Brute Force service you need to have minimum 50 credits on your MT Box account (these credits will not be deducted. Its just authorization credits.
• All support questions regarding SL3 Local Brute Force (hardware requirements etc….) need to be posted in dedicated forum section SL3 Local Brute Force - LBF

Descargas:

http://rapidshare.com/#!download|720l3...ce_v0.1.zip|956
http://www.megaupload.com/?d=HYLJW856
http://www.mediafire.com/?qd5b18334mnq353
http://hotfile.com/dl/101271592/535df59/MT...e_v0.1.zip.html
http://www.4shared.com/file/a6zglRLR/MT_Bo...te_Force_v.html

[SpLock]

MTBox CG (Credits Generator) Ver 1.5 Released
04.02.2011

MTB CG (Credits Generator) Ver 1.5 released :

* added next code calculation time information


Click on picture for normal size !

 mt.JPG... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 30.91k ) Número de descargas: 0


How to buy GT server account for 1 minute 24/7/365 using  MTB_CG_1... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 862.36k ) Número de descargas: 6
:

1. Click Buy Credits Page button and you see on your web browser official online shop for GT Server Credits.
2. Enter your MTBox serial number to special place in web .
3. Select the appropriate number of credits 10,20,40,50,80,100,120,150 or 200 and make payment online via PayPal or credit cards .
4. Connect the same MTBox how serial number you have entered to payment form before payment
5. Enter the data obtained by making a payment . ( Paypal e-mail adres and Transaction / Reseipt ID )
NOTE : Typing e-mail address must be the same as e-mail address with PayPal
6. Click Get Account / Add credits to box button . SL3 credits added to box serial number automaticly

[Pulian]

ANUNCIO OFICIAL

Marzo 21 2011

Dear customers,

Due to SL3 unlock server NON-STOP overload and waiting time for code more then 7 days, we are forced to increase the RAP3 unlock price to 50 credits per phone. By doing this we try to make waiting time more aceptable for all customers.
New services are under way.

Thank you for understanding.

Griffin Team

Queridos usuarios,

dado que los servidores para desbloquear nokia SL3 no detiene la sobrecarga y los tiempos de espera para la llegada de los codigos nck toman mas de 7 dias, nos hemos visto obligados a incrementar el precio de desbloqueo de los nokia RAP3 a 50 creditos (40 anteriormente) por telefono. Al hacer esto tratamos de ofrecer un mejor y aceptable tiempo de espera para todos los usuarios.

Nuevos servicios en camino

Gracias por su comprension

[falladera]

Discussion thread.
Please post here all your problems and recommendations regarding this update.


What's new:

• SL3 unlock support extended with many new models. Phone hash does not important anymore.
• Backup and restore certificates over USB added

Price for unlock is 50 MT Box credits for all models.
Unlock for all phones is supported using FBUS only.

There is a list of all supported models with MT Box:

• 2690 – RM-635
• 2700c, 2700c-2 – RM-561
• 2730c-1, 2730c – RM-578
• 2730c-1b – RM-579
• 3600s – RM-352
• 3720c – RM-518
• 3720c-2 – RM-518
• 5130, 5130c-2 – RM-495
• 5130c-2 – RM-496
• 5228, 5230, 5232, 5233 – RM-588/593/594/625/629
• 5310 Xpress Music – RM-303
• 5530 – RM-504
• 5630 Xpress Music – RM-431
• 5630d-1 – RM-431
• 5730s-1 Xpress Music – RM-465
• 5800d – RM-356/428
• 6120c – RM-243
• 6300 – RM-217
• 6303c – RM-443
• 6500c – RM-265
• 6500s-1 – RM-240
• 6700c-1, 6700c – RM-470
• 6700s – RM-576
• 6710s navigator – RM-491
• 6720c – RM-424
• 6730c-1 – RM-547
• 6750 Mural – RM-381
• 6760s – RM-573
• 6790s – RM-492/599
• 7210c, 7212c – RM-436
• C3-01 - RM-640
• C5-00 – RM-645
• C5-03 – RM-697
• C6-00 – RM-612/624
• C6-01 – RM-601/718
• C7-00 – RM-675
• E5-00 – RM-632
• E52-1 – RM-469
• E55-1 – RM-482
• E63 – RM-437/450
• E66 – RM-343/345/420/494
• E71 – RM-346/347/357/407/493
• E72-1 – RM-530
• E72-2 – RM-529
• E73 – RM-658
• N8-00 – RM-596
• N86 – RM-484/485/486
• N97 – RM-505/506/507
• N97-4 mini – RM-555
• N97-5 – RM-553
• X3-02 – RM-639
• X5-01 – RM-627
• X6-00 – RM-551/559


Note:

Rap3v4 models to be supported during this week.

Download:

https://rapidshare.com/#!download|927l3..._37.ZIP|510|SSL downloads are only available for RapidPro customers. (3cf02fc0)



http://hotfile.com/dl/113434623/3099751/MTB_NK_2_37.ZIP.html

[Pulian]

Reporte de Error

En la nueva version 2.37 se encuentran diversos errores en el unlock y flasheo de algunos nokia bb5 sl2. Se recomienda usar la version 2.35 o 2.36 para desbloquear y flashear mientras se arregla el problema

NO DESBLOQUEA

V 08w35.08/28-11-08/RM-367 © Nokia
IMEI: 3569500xxxxxxx
Operator: 0000000000000000
Profile bits: 2140100000000000
Closed on GID1: 21401F
Closed on Mcc Mnc: 21401F
3569500xxxxxxx
Searching loader
RAPIDOv11_2nd.fg
RAP3 Phone, Requesting...
Found BB5SL20 Pin. Proceeding in StandAlone mode
RAP3 Failed at stage1
CECECECECECECECE1E7F
SL20 RPL Procedure Finished

FLASHEA HASTA LA PARTE DE ERASE Y SE CUELGA

Boot...
rap3gv3_2nd.fg
RAP3Gv3_algo.fg
CMT Certificates
NPC 0x0200
HWC 0x0100
CCC 0x0200
C:\Program Files\GriffinTeam\MT-Box\rpls\351962XXXXXXrpl
Erase RAP3 [00000000 - 000006BF]
Erase RAP3 [000006C0 - 0001FFFF]
Erase RAP3 [00040000 - 000BFFFF]
Erase RAP3 [000C0000 - 0013FFFF]
Erase RAP3 [00140000 - 0119FFFF]
Erase RAP3 [011A0000 - 0133FFFF]
Erase[19.13 MB]...
Waiting response for 132 Sec...in 89.44s
Flash[18.04 MB]...

[Pulian]

27.04.2011 - MTB NK 2.37.1


Acerca del update:

* Corregido el flasheo via FBUS para los telefonos con RAP3 (como el 5130) con un algoritmo original de flasheo

* Corregido RPL SL20 para los telefonos RAPIDO (n96, n95, etc)

Descargar:

LINK RAPIDSHARE

LINK MEGAUPLOAD

LINK MEDIAFIRE

LINK HOTFILE

[dapx]

MT-Box NSM v2.240 - SL3 USB and AMOI unlocking module updated + FREE NSM credits & accounts

SL3 revised

now checks if phone is supported or not comparing code name (like RM-345)
now calculation time is better

This is an application for information purposes and checking by one mouse click thought USB interface/ No need NSM Account, no need NSM credits:



The GriffinTeam SL3 Server time status (how many time next uploaded phone will be ready)
Phone model
Firmware version
Phone IMEI
Phone Product Code
Phone life timer
SIM-Lock Self-Test
SECURITY Self-Test
SUPERDONGLE Self-Test
SIM-Lock information (un/locked state, provider (key), config key)
Code Counters (by k'board & F-Bus)
Root Key HASH




MT-Box NSM v2.240 - AMOI based updated:

Versions supported of AMOI Manufacturer:

INQ1

Firmware Version: INQ1_V3.9.1_UK / FS V3.9.1 Compiled data: Dec 01 200809:33:30Nov 12 200822:00:00KYUZ

INQ1

Firmware Version: INQ1_V4.0.4_ITA / FS V4.0.4 Compiled data: Mar 06 200916:47:34Nov 12 200822:00:00KYUZ

MD1 - WPS1

Firmare Version: Wp-S1_V18.0
Firmare Version: Wp-S1_V18.5
Firmare Version: Wp-S1_V18.7
Firmare Version: Wp-S1_V21.0
Firmare Version: Wp-S1_V22.0
Firmare Version: Wp-S1_V23.0


WPS2

Firmare Version: S2_V14.4_UK


Read security code for MD-1 - 1 NSM Credit required



SP Unlock MD-1 - 2 NSM Credits required



Read code for INQ1 - 1 NSM Credit required



Unlock INQ1 - 2 NSM Credits required



WP-S1 Code - 1 NSM Credit required



WP-S1 SP Unlock - 2 NSM Credits required



MT-Box NSM v2.240 - FREE NSM credits & accounts

For now you have opportunity to try MT-Box NSM (Nokia Support Manager) w/o any credits and accounts. We are enabled absolutely free trial accounts for :

Nokia Server#1 Download content about 300 GB - 24h TRIAL MODE !!
Nokia Server#2 Download content about 800 GB - 24h TRIAL MODE !!
Nokia Spare Part Finder - 24h TRIAL MODE !!
Nokia Language Pack Finder - 24h TRIAL MODE !!
Nokia Variants Finder - 24h TRIAL MODE !!
Nokia SL3 USB Reader (already free for all)
Nokia Navi Variants downloader - 24h TRIAL MODE !!
AMOI Unlocking / Repairing Module - 24h TRIAL MODE !!
ZTE / Momodesign / ZTE / Vodafone Module (Unlocking / Repairing - full service!) - 24h TRIAL MODE !!
Alcatel SP Code Reader - 24h TRIAL MODE !!
The NSM Files Requesting is not available for TRIAL users !


Access for NSM Servers and 4 NSM Credits (available beggining at 12:00 p.m 05/05/11 till 11:59 a.m 06/05/11) GMT +1.00 Zone:

user: demo01 pass: NSMdemo01 (free 4 NSM credits + NSM 24h limited account)
user: demo02 pass: NSMdemo02 (free 4 NSM credits + NSM 24h limited account)
user: demo03 pass: NSMdemo03 (free 4 NSM credits + NSM 24h limited account)
user: demo04 pass: NSMdemo04 (free 4 NSM credits + NSM 24h limited account)

Related Threads:

How buy NSM Account with Full access to Nokia Support and Additional features
FTP News - Nokia Support Manager - all file updates have been stored here

[dapx]

05.05.2011 - MT Box Local Brute Force Shell v0.3

What's new in SL3 LBF Shell v0.3:

• Support for HashCat LBF software
• Now supports both LBF software ighashgpu and HashCat
• Supports ATI 6xxx cards, Dual GPU cards, Nvidia cards etc)
• Support for LBF under Windows 32, Windows 64, Linux 32 and Linux 64
• Support for start, stop and resume LBF job
• Support to add more jobs in queue. So you don’t need to be with PC all the time to add new jobs.
• When one job done next will be automatically started.
• You can remove jobs from queue in single click
• Can create LBF job list, and load it at any time

Br.
F@RUK S.

[falladera]

What's new:

• RPL fix for small lock definitions
• RAP3v4 SL phones unlock supported via server or LBF:

- 3710a-1 (RM-509)
- 3710a-1b (RM-510)
- 3711a-1 (RM-511)
- 6303ci (RM-638)
- 7230 (RM-604)
- X3-00 (RM-540)
- X5-01 (RM-627)

USB read for SL3 phones will be ready for 1-3 days.

Download:


http://www.megaupload.com/?d=HMWJWYZN

http://www.mediafire.com/?mw1pg77usz776w4